warning KIA STONIC 2018 Owners Manual

-When the stopped vehicle in front
gets out of the lane, it may not be
recognized by your FCA. Always pay great attention.
- Recognizing the vehicle
When the vehicle in front has heavy
loading extended rearward, or when
the vehicle in front has higher ground clearance, it may induce a hazardous
situation.
Recognizing pedestrians
- The pedestrian is not fully captured
by the camera sensor, or the pedes‐
trian does not walk in the upright po‐ sition.
- The pedestrian moves very fast.
- The pedestrian abruptly appears in
front.
- The pedestrian wears clothes in the
color similar to the background.
- The outside is too bright or too dark.
- The vehicle drives at night or in the
darkness.
- There is an item similar to a person’s
body structure.
- The pedestrian is small.
- The pedestrian has impaired mobility.
- It is difficult to distinguish the pedes‐
trian from the surroundings.
- The sensor recognition is limited. -
There is a group of pedestrians.
WARNING
•Cancel the FCA in the User Set‐tings on the LCD display, beforetowing another vehicle. While tow‐ing, the brake application may ad‐versely affect your vehicle safety.
•Pay great caution to the vehicle infront, when it has heavy loadingextended rearward, or when it hashigher ground clearance.
•The sensor only detects pedes‐trian, not carts, bicycles, motorcy‐cles, luggage bags, or strollers.
•The FCA does not operate in a cer‐tain situation. Thus, never test-operate the FCA against a personor an object. It may cause a severeinjury or even death.
•When reinstalling the windshield orLane Departure Warning (LDW)camera after replacement or re‐moval, have the vehicle inspectedby a professional workshop. Kiarecommends to visit an authorizedKia dealer/service partner.
Driving your vehicle

6-60

LANE DEPARTURE WARNING (LDW) SYSTEM (IF EQUIPPED)
0:#%
This system detects the lane with the
sensor at the front windshield and warns you when your vehicle leaves the
lane.
WARNING
•The Lane Departure Warning(LDW) System does not make thevehicle change lanes. It is the driv‐er's responsibility to always checkthe road conditions.
(Continued)
(Continued)
•Do not turn the steering wheelsuddenly, when the Lane Depar‐ture Warning (LDW) System warnsyou that your vehicle is leaving thelane.
•If the sensor can not detect thelane or if the vehicle speed doesnot exceed 60km/h, the Lane De‐parture Warning (LDW) Systemwon't warn you even though thevehicle leaves the lane.
•If your vehicle has window tint orother types of coating and acces‐sory on the front windshield, theLane Departure Warning (LDW)System may not work properly.
•Do not let water or any kind of liq‐uid come in contact with the LaneDeparture Warning (LDW) Systemsensor.
•Do not remove the Lane DepartureWarning (LDW) System parts anddo not affect the sensor by astrong impact.
•Do not put objects that reflectlight on the dash board.
(Continued)
Driving your vehicle
6-62

(Continued)
•Always check road conditions be‐cause you may not hear the warn‐ing chime because of audio and ex‐ternal conditions.
To operate the Lane Departure Warning
(LDW) System, press the switch with the ignition in the ON position. The indi‐
cator illuminates white on the cluster.
To cancel the Lane Departure Warning
(LDW) System, press Lane Departure Warning (LDW) System button again.
The indicator on the cluster will go off.
If you select trip display, the Lane De‐
parture Warning (LDW) System mode on the LCD display will appear.
If your vehicle leaves the lane when the
Lane Departure Warning (LDW) System
is operating and vehicle speed exceeds
60 km/h, the warning operates as fol‐
lows:
¥
-FGU
MBOF
EFQBSUVSF
XBSOJOH
¥
3JHIU
MBOF
EFQBSUVSF
XBSOJOH
1. Visual warning If you leave a lane, the lane you
cross will blink (yellow) and Lane
Departure Warning (LDW) System
indicator will blink green on LCD
during max 3 seconds.

6-63
6
Driving your vehicle

2. Auditory warningIf you leave the lane, the warning
sound operates for maximum
3 seconds.
The color of symbol will change de‐
pend on the condition of Lane De‐
parture Warning (LDW) System
system.
• White
color: When you activate the lane
departure warning system
by pressing the Lane Depar‐
ture Warning (LDW) System
button, system operating
conditions are not satisfiedor the sensor does not de‐tect the lane line.
• Green
color: When you activate the lane
departure warning system
by pressing the Lane Depar‐
ture Warning (LDW) System
button, system operating
conditions are satisfied andthe sensor detect the laneline.
• Yellow
color: When there is a malfunction
with the lane departurewarning system.Warning indicator
0:#-
When the Lane Departure Warning
(LDW) System is not working properly, the warning light will illuminate and the
warning message will come on for a
few second. After the message disap‐ pears, the master warning light will illu‐
minate.
In this case, have the system checked
by a professional workshop.
Kia recommends to visit an authorized Kia dealer/service partner.
The Lane Departure Warning
(LDW) System does not operate
when:
• The driver turns on the turn signal or the hazard warning flasher to change
lane.
• Driving on the lane line.
NOTICE
To change lanes, operate the turn
signal switch, then change the lane.
The Lane Departure Warning
(LDW) System may not warn
you even if the vehicle leaves
the lane, or may warn you even
if the vehicle does not leave the
lane when:
• The lane is not visible due to snow, rain, stain, a puddle or many other
things.
• The brightness of the outside changes suddenly.
• The headlights are off at night or in a tunnel.
Driving your vehicle
6-64

DRIVER ATTENTION WARNING (DAW) SYSTEM (IF EQUIPPED)
The Driver Attention Warning (DAW)
system displays the condition of the
driver's fatigue level and inattentive driving practices.
System setting and activation
System setting
• The Driver Attention Warning system is set to be in the OFF position, when
your vehicle is first delivered to you from the factory.
• To turn ON the Driver Attention Warning system, turn on the engine,
and then select 'User Settings
Driving Assist Driver Attention
Warning Normal/Early' on the LCD
display.
• The driver can select the Driver At‐ tention Warning system mode.- Off: The Driver Attention Warning system is deactivated.
- Normal: The Driver Attention Warning system alerts the driver
of his/her fatigue level or inatten‐
tive driving practices.
- Early: The Driver Attention Warn‐ ing system alerts the driver of
his/her fatigue level or inattentive
driving practices faster than Nor‐mal mode. • The set-up of the Driver Attention
Warning system will be maintained,as selected, when the engine is re‐
started.
Display of the driver's attention
level
0:#-
4ZTUFN
PGG
0:#-
"UUFOUJWF
ESJWJOH
0:#-
*OBUUFOUJWF
ESJWJOH
• The driver can monitor their driving conditions on the LCD display.
The DAW screen will appear when
you select the ASSIST mode tab (
)
on the LCD display if the system is
activated. (For more information, re‐
fer to L

• When the driver turns on the systemwhile driving, it displays 'Last Break
time' and level.
Take a break
0:#-
• The "Consider taking a break" mes‐ sage appears on the LCD display and
a warning sounds in order to suggest the driver to take a break, when the
driver's attention level is below 1.
• The Driver Attention Warning system does not suggest the driver to take a
break, when the total driving time is
shorter than 10 minutes.
Resetting the system
• The last break time is set to 00:00 and the driver's attention level is setto 5 (very attentive) when the driver
resets the Driver Attention Warning
system.
• The Driver Attention Warning system resets the last break time to 00:00
and the driver's attention level to 5 in the following situations. - The engine is turned OFF.
- The driver unfastens the seat belt and then opens the driver's door.
- The engine has been idled continu‐ ously over 10 minutes.
• The Driver Attention Warning system operates again, when the driver re‐
starts driving.
System standby
0:#-
The Driver Attention Warning system
enters the ready status and displays the 'Standby' screen in the following
situations.
- The camera does not detect the
lanes.
- Driving speed remains under 60 km/h
(40 mph) or over 200 km/h
(125 mph).

6-67
6
Driving your vehicle

System malfunction
0:#-
When the "Check Driver Attention
Warning (DAW) system" warning mes‐ sage appears, the system is not work‐
ing properly. In this case, have the vehi‐
cle inspected by a professional work‐ shop. Kia recommends to visit an au‐
thorized Kia dealer/service partner.
WARNING
•The Driver Attention Warning sys‐tem is not a substitute for safedriving practices, but a conven‐ience function only. It is the re‐sponsibility of the driver to alwaysdrive cautiously to prevent unex‐pected and sudden situations fromoccurring. Pay attention to theroad conditions at all times.
•The system may suggest a breakaccording to the driver's drivingpattern or habits even if the driverdoesn't feel fatigue.
•The driver, who feels fatigued,should take a break, even thoughthere is no break suggestion bythe Driver Attention Warning sys‐tem.
NOTICE
The Driver Attention Warning sys‐
tem utilizes the camera sensor on
the front windshield for its opera‐
tion. To keep the camera sensor in
(Continued)
(Continued)
the best condition, you should ob‐
serve the followings:
•NEVER install any accessories or
stickers on the front windshield,
nor tint the front windshield.
•NEVER locate any reflective ob‐
jects (i.e. white paper, mirror) over
the dashboard. Any light reflection
may cause a malfunction of the
Driver Attention Warning (DAW)
system.
•Pay extreme caution to keep the
camera sensor out of water.
•NEVER arbitrarily disassemble the
camera assembly, nor apply any
impact on the camera assembly.
CAUTION
The Driver Attention Warning sys‐tem may not properly operate withlimited alerting in the following sit‐uations:
(Continued)
Driving your vehicle
6-68

(Continued)
•The vehicle is violently driven or isabruptly turned for obstacleavoidance (e.g. construction area,other vehicles, fallen objects, bum‐py road).
•Forward drivability of the vehicle isseverely undermined (possibly dueto wide variation in tire pressures,uneven tire wear-out, toe-in/toe-out alignment).
•The vehicle drives on a curvy road.
•The vehicle drives through a windyarea.
•The vehicle is controlled by the fol‐lowing driving assist systems:-Forward Collision-Avoidance As‐sist (FCA) System
-Smart Cruise Control (SCC) Sys‐tem
CAUTION
Playing the vehicle audio system athigh volume may offset the DriverAttention Warning system warningsounds.

6-69
6
Driving your vehicle

BLIND-SPOT COLLISION WARNING (BCW) (IF EQUIPPED)
0%&-
The Blind-Spot Collision Warning (BCW)
system uses a radar sensor to alert the driver while driving.
It senses the rear side territory of the
vehicle and provides information to the
driver. 1. Blind-Spot Collision Warning (BCW)
Warning range is dependent on
your vehicle speed. However, if the
speed of your vehicle is faster by
10km/h or more than other nearby
vehicles, the warning is not operat‐ ed.
2. Lane change assist (LCA) When vehicles are approaching to
your vehicle at high speed, the
warning is operated.
3. Rear Cross-Traffic Collision Warning (RCCW)
When your vehicle moves back‐
ward, the sensor detects approach‐
ing vehicles to the left or right side
direction and warning is operated.
WARNING
•Always check the road conditionwhile driving for unexpected situa‐tions even though the Blind-SpotCollision Warning (BCW) system isoperating.
(Continued)
(Continued)
•Blind-Spot Collision Warning (BCW)system is a system made for con‐venience. Do not solely rely on thesystem but always pay attentionto drive safely.
Driving your vehicle
6-70

BCW (Blind-Spot Collision
Warning) / LCA (Lane Change
Assist)
Operating conditions
0:#
The indicator on the switch will illumi‐
nate when the Blind-Spot Collision Warning (BCW) system switch is press‐
ed with the ignition switch ON. If the
vehicle speed exceeds 30 km/h (18.6 mph), the system will activate.
If you press the switch again, the
switch indicator and system will be
turned off.
If the ignition switch is turned OFF and ON the system returns to the previous
state. When the system is not used turn the
system off by pressing the switch.
When the system is turned on the warning light will illuminate for
3 seconds on the outside rearview mir‐
ror.
Warning type
The system will activate when: 1. The system is on
2. Vehicle speed is above 30 km/h (18.6 mph)
3. Other vehicles are detected in the rear side
0%&
TU
TUBHF
If a vehicle is detected within the boun‐
dary of the system, a warning light will illuminate on the outside rearview mir‐
ror.
If the detected vehicle is not in detec‐
tion range, the warning will be turned off.

6-71
6
Driving your vehicle