LAND ROVER FRELANDER 2 2006 Repair Manual
Page 2981 of 3229
261
Telephone
R
Another brief press of the ENTER button will
store the tone. If you press the EXIT button the
tone will not be stored and the ring tone menu
will remain visible. Press the EXIT button again
to return to the main menu or to the function
previously selected.
Note: Not all mobile telephones support
Mobile ring tone , in this case it will not be
possible to select and store the Mobile ring
tone setting in the vehicle system.
Autocopy phonebook
This feature allows you to choose whether or
not your phone book is automatically updated
every time you connect your telephone to the
vehicle system. If On is selected and your
telephone has the capabili ty, the vehicle phone
book will be updated the next time the
telephone is connected to the vehicle. If Off is
selected the phone book will not be
downloaded to the vehicle system. See
PHONEBOOK (page 266).
Press the ENTER button after making your
selection. Pressing the EXIT button will return
you to the previous screen. To return to the
telephone main display, press and hold the
EXIT button.USING THE TELEPHONE
Selecting telephone mode
Switch on the ignition. If your telephone is
switched on and previously paired or
connected with the system, you can select the
vehicle telephone system.
Briefly press the te lephone mode button
(arrowed). Visual conf irmation of telephone
operation is given via the display.
If a telephone is not paired to your vehicle
system, No paired Phone and Do you want to
pair? is displayed. See BLUETOOTH SETUP
(page 256).
To exit telephone mode, press one of the audio
system mode buttons, i.e. FM, AM or CD or
AUX .
Telephone display
There are four different call status screens:
SELECT
EXITOn
Off
E83813
14 : 54
ricsson T39
E83788
Page 2982 of 3229
Telephone
262
L
No call
Dialling
Incoming call
Call in progress
Making telephone calls
Dialling a number manually Enter the telephone number
to be dialled, using
the vehicle keypad. The digits of the number
appear in the display.
To pause during number entry, press and hold
the AUTO key. A * symbol will appear in the
display.
The international dial symbol + can be entered
by pressing and holding the 0 (zero) key.
When the telephone numbe r has been entered,
briefly press the ENTER button or operate the
answer call switch on the steering wheel to dial
the number ( Dialling appears in the display
supported by ringing tones). A successful
connection is shown on the display.
Ericsson T39
14 : 54
E83789
Dialling...
Andrew WorkCANCEL
E83790
Answer?
Andrew Work
YES
NO
E83791
00:17:04
Andrew WorkEND
MENU
E83792
DIAL
CLEAR
>0192664
Dialling...
01926648100CANCEL
00:00:00
01926648100END
MENU
E83793
Dialling...
Page 2983 of 3229
263
Telephone
R
Note: To cancel a call at any time, press the
EXIT button or operate the end call button on
the steering wheel.
Correcting or deleting numbers
If an incorrect digit is entered, press the EXIT
button (arrowed) to delete the last digit, then
enter the correct digit.
Press and hold the EXIT button (for
approximately two sec onds) to delete all
entered digits.
Multiple choice dialling
If the number you have dialled has an
automated voice that requests another
number, for a different area or department, use
the keypad to enter that number.
Last number redial
The last number dialled can be redialled using
the answer call switch on the steering wheel. If
telephone mode is active , pull and release the
switch. The number will appear in the audio
unit display. Pull and release the answer call
switch for a second time and the number will
be dialled.
If telephone mode is not active, press the
telephone mode button to enter telephone
mode. Note:
Some mobile telephone s reverse the last
dialled number list, whic h results in the last
dialled number being at the bottom of the list,
rather than the top.
Ending telephone calls
To end a telephone call, press the EXIT button
or operate the end call switch on the steering
wheel.
DIAL
CLEAR
>0192664
E83795
00:03:14
Andrew WorkEND
MENU
E83796
Page 2984 of 3229
Telephone
264
L
Receiving telephone calls
When a call is received, the number or caller ID
(if entered into the phone book) will appear in
the audio unit display.
If the audio or a CD was in use before the
telephone call then that function will resume at
the end of the phone call. A CD will continue
playing from the point at which it was paused
by the telephone call. Th e telephone display will
be visible for the duration of the call.
The call can be answered in two ways:
• Operate the answer call switch on the
steering wheel (arrowed in inset).
• Briefly press the ENTER button (arrowed). If automatic answer is switched on, the call is
accepted automatically. If automatic answer is
switched off, and you do nothing, the vehicle
system will operate as your mobile telephone
would operate, i.e. go to voice mail or continue
ringing.
Note: The automatic answer feature can be
switched on or off. See TELEPHONE SETUP
(page 258).
When the call is accepted, the display shows
that the call is in progress and the duration of
the call in minutes and seconds.
Rejecting an incoming call
To reject a call without an swering, briefly press
the EXIT button or operate the end call switch
on the steering wheel.
YES
NO
JennyAnswer?
E83797
YES
NO
JennyAnswer?
E83798
Page 2985 of 3229
265
Telephone
R
Telephone in-call menu
A number of settings can be made while a call
is in progress. These are:
• muting the call
• privacy call
• accessing the phonebook.
When the call is ende d the in-call settings
return to their default values.
To enter the in-call menu, press the MENU
button and then rotate the ENTER button to
highlight the required option. Press the ENTER
button to select.
Mute the call
Select Mute and press the ENTER button, this
will prevent the caller from hearing any
conversation in the vehicle.
Select Mute Off and press the ENTER button to
resume your telephone conversation. Privacy mode
Select Privacy and press the ENTER button,
this will transfer the call to the mobile
telephone preventing th e vehicle occupants
from listening in to your received conversation.
Select Hands Free and press the ENTER button
when you wish to return to using the vehicle
system.
Note: Some mobile tele phones may end the
call or lose the Bluetooth connection when
transferring between Pr ivacy and Hands Free
modes.
Phone book
You can access your phone book during a
telephone conversation if you need to find a
particular number.
Select Phonebook and press the ENTER
button.
Press the EXIT button to return to your
telephone conversation.
00:17:04
Andrew WorkEND
MENU
SELECT
EXITPhonebookPrivacy
Mute
E83801
Page 2986 of 3229
Telephone
266
L
Voice mail
Voice mail may be set up by your service
provider and can be used by the vehicle
system.
Before voice mail can be used in the vehicle
system, the voice mail number needs to be
entered. See TELEPHONE SETUP (page 258). You can access your voice mail when the
mobile telephone is swit ched on, the voice mail
number has been stored in the vehicle system
and the vehicle system is in telephone mode.
Press and hold the number 1 key on the
keypad. This will send a message to the mobile
telephone to dial the voice mail number.
You can also access voice mail by using Call
options in the Phone Settings menu. See
TELEPHONE SETUP (page 258).
The audio unit display wi ll indicate when voice
mail is empty.PHONEBOOK
When your telephone is next connected to the
vehicle and autocopy phonebook is set to On,
your phonebook is downloaded automatically
to the vehicle system, provided your telephone
has the capability. See TELEPHONE SETUP
(page 258).
Note: If there is a communication problem with
the telephone or the telephone does not
support this feature, the message Phonebook
is empty will be displayed, and the phonebook
will not be downloaded.
14 : 54Ericsson T39
ENTER
EXIT
number>
Enter voicemail
ENTER
CLEAR
number>1234567890
Enter voicemail
Dialling...
Voicemail
CANCEL
E83803
14 : 54Ericsson T39
Dialling...Voicemail
CANCEL
E83804
Page 2987 of 3229
267
Telephone
R
Once downloaded, the phonebook can be
accessed through the telephone main menu.
1. Press the MENU button to access the
telephone main menu.
2. Rotate the ENTER button to highlight
Phonebook and press the ENTER button
again to select.
Note: To exit the phonebook without selecting
an entry, press the EXIT button.
Phonebook menu
Rotate the ENTER button to select one of the
following options:
• Search Phonebook
• Copy from Phone
• Erase car entry
• Erase car Ph.book
Press ENTER to confirm your selection. Search Phonebook
Note: When viewing the phonebook, do not
rotate the volume button as this will result in
your highlighted selection returning to the first
entry in the phonebook, i rrespective of your
previously highlighted position.
The following methods can be used to search
the phonebook:
• browsing
• alphabetic search
• quick search
Browsing the phonebook
1. With phonebook displa yed, rotate the
ENTER button clockwise, or operate the
menu next button on th e steering wheel to
scroll down the phonebook. To scroll up
the phonebook, rotate the ENTER button
counterclockwise or press the menu
previous button on the steering wheel.
2. Once the chosen phonebook entry is
highlighted, press the ENTER button, or
operate the answer call switch on the
steering wheel, to dial the number.
SELECT
EXITPhonebook
Dialled calls
14 : 54Ericsson T39
Bluetooth
E83805
SELECT
EXITDonnaDavid
Darren
Dialling...
DavidCANCEL
E83806
Page 2988 of 3229
Telephone
268
L
3. If an entry was selected by mistake, either
operate the end call switch on the steering
wheel, or press the EXIT button to cancel
dialling.
Alphabetical search
1. With the phonebook displayed, press the
appropriate key the corresponding number
of times according to th e initial letter of the
entry.
• For example; if the initial letter of the
required phonebook entry is H, press the
4 key on the keypad twice. The display
will now show all entries beginning with
the letter H. 2.
If there are a large number of entries
beginning with the letter H, the second and
subsequent characters of the name can be
added by repeatedly pressing the relevant
key until the character appears in the audio
unit display.
• For example; if the required phonebook
entry is Helen, press the 4 key on the
keypad twice the 2 key on the keypad
twice, and the 5 key on the keypad three
times. The display will now show all
entries beginning with Hel.
3. Once the chosen phonebook entry is
highlighted, press the ENTER button, or
operate the answer call switch on the
steering wheel, to dial the number.
Dialling...
HelenCANCEL
SELECT
EXITHomeHelen
Harry
E83807
Page 2989 of 3229
269
Telephone
R
Quick search
1. To find a specific number from your
phonebook without accessing the
phonebook, while in telephone mode,
press and hold a key (between 2-9) which
corresponds to the first letter of the name.
• For example; if the initial letter of the
required phonebook entry is an M, press
and hold the 6 key of the keypad. The
phonebook will open at the selected
point.
2. If there are a large number of entries
beginning with letter M, the second and
subsequent characters of the name can be
added by repeatedly pressing the relevant
key until the character appears in the audio
unit display.
• For example; if the required phonebook
entry is Mark, press the 2 key on the
keypad once and the 7 key on the keypad
three times. The display will now show
all entries beginning with Mar. 3.
Once the chosen phonebook entry is
highlighted, press the ENTER button, or
operate the answer call switch on the
steering wheel to dial the number.
Copy from phone
If the phonebook in th e vehicle system does
not match that of th e mobile telephone (and
your mobile telephone s upports this feature),
the following procedure will allow you to
resynchronise.
Note: The vehicle system phonebook allows
750 entries to be downloa ded. If your mobile
telephone contains more than this, the mobile
telephone will send these in memory location
order. Which means that your telephone
phonebook may not always match the vehicle
system.
1. Enter the phonebook menu and select
Copy from Ph. book . Press the ENTER
button to confirm.
2. If successful, Phonebook downloading to
the car is in progress will appear on the
display.
3. On completion of the download, the
display will return to the telephone main
menu.
If the phonebook download is not supported,
the message Phonebook download is not
supported by this phone will appear in the
display.
Erase car entry
Once a phonebook has been downloaded,
individual entries can be erased from the
vehicle system, not from the mobile telephone.
Note: If Autocopy phonebook is switched on,
the next time the telephone is connected to the
vehicle system , the mobile telephone's
phonebook will be sent to the vehicle. This may
result in your previous ly deleted entry being
re-instated in the vehicle system phonebook.
14 : 54Ericsson T39
SELECT
EXITNeilMark
E83840
Page 2990 of 3229
Telephone
270
L
1. Enter the phonebook menu and select
Erase car entry .
2. Press the ENTER button to confirm.
3. Rotate the ENTER button to select the
entry you wish to erase and press the
ENTER button.
4. A confirmation messag e will appear on the
display. Press the ENTER button to erase
the entry or press the EXIT button to retain
the entry and return to the menu.
Erase car Ph. book
Once a phonebook has been downloaded, it
can be erased from the vehicle system, not
from the mobile telephone.
Note: If Autocopy phonebook is switched on,
the next time the telephone is connected to the
vehicle system, the mobile telephone's
phonebook will be sent to the vehicle. This may
result in your previously deleted phonebook
being re-instated in the vehicle system.
1. Enter the phonebook menu and select
Erase car Ph. book . Press the ENTER
button.
2. A confirmation messag e will appear on the
display. Press the ENTER button to erase
the phonebook or press the EXIT button to
retain the phonebook and return to the
menu.TELEPHONE VOICE CONTROL
The vehicle system is able to use any voice tags
which are stored in the mobile telephone.
Note: Voice tags are stored via the mobile
telephone and should be set up without the
mobile telephone connect ed to the vehicle.
1. Press and hold the ENTER button, or pull
and hold the answer call switch on the
steering wheel to access voice tag dialling.
2. The phone display will show that voice tag
dialling is in progress and, after an audible
prompt from your mobile telephone, you
should recite the name that you want to
call.
3. A message on the audio unit display will
confirm your voice ta g and the number is
then dialled.
4. If the name you requested is not
recognised then you will be informed.
5. Press the EXIT button to cancel voice tag
dialling.
14 : 54Ericsson T39
Dialling... Voice Tag
CANCEL
Dialling...01926648100
CANCEL
E83802