navigation Lexus ES300h 2014 Navigation Manual

40
1. BASIC INFORMATION BEFORE OPERATION
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
5. MAP SCREEN OPERATION
zThe current position mark ( ) appears in
the center or bottom center of the map
screen.
z A street name will appe ar on the bottom of
the screen, depending on the scale of the
map ( ).
z The screen can be returned to this map
screen that shows the current position at
any time, from any screen by pressing the
“MAP/VOICE” button on the Remote
To u c h . z
Use the scroll feature to move the desired
point to the center of the screen for looking
at a point on the map that is different from
the current position.
z To scroll over the map, place the pointer in
a position near the desired destination and
then press and hold the Remote Touch
knob. The map will cont inue scrolling in that
direction until the knob is released.
z A street name, city name, etc. of the
selected point will be shown, depending on
the scale of the map ( ). Distance from
the current position to will also be
shown ( ).
CURRENT POSITION DISPLAY
When starting the navigation system,
the current position is displayed first.
This screen displays the current position
and a map of the surrounding area.
zTo correct the current position manually,
see page 130.
INFORMATION
●
While driving, the current position mark
is fixed on the screen and the map moves.
●The current position is automatically set
as the vehicle receives signals from the
GPS (Global Positioning System). If the
current position is not correct, it is auto-
matically corrected after the vehicle
receives signals from the GPS.
INFORMATION
●
After 12-volt battery disconnection, or on
a new vehicle, the current position may
not be correct. As soon as the system
receives signals from the GPS, the cor-
rect current position is displayed.
SCREEN SCROLL
OPERATION
When any point on the map is selected,
that point moves to the center of the
screen and is shown by the cursor mark
().

56
2. SETUP
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
■LAYOUT TYPE
X “ABC” type
X “QWERTY” type
CHANGING THE STARTUP
IMAGE
When the “START STOP ENGINE”
<“POWER”> switch is in ACCESSORY
or IGNITION ON <ON> mode, the ini-
tial screen will be displayed.
An image can be copied from a USB
memory and used as the startup image.
(For information regarding the startup
image, see “INITIAL SCREEN” on page
32.)
INFORMATION
●
When saving the images to a USB, name
the folder that the startup image is saved
to “StartupImage” and name the folder
that the screen off image is saved to
“DisplayOffImage”. If these folder names
are not used, the navigation system can-
not download the images. (The folder
names are case sensitive.)
●The images file extension is JPG or
JPEG.
●The images file name, including the file
extension, can be up to 32 characters.
●Image files of 10 MB or less can be saved.
●Up to 3 images can be downloaded.

3
67
1
2
3
4
5
6
7
8
9
ES350/300h_Navi_OM33A66U_(U)13.07.11 09:52
10
1. ROUTE GUIDANCE SCREEN ............ 90
2. TYPICAL VOICE GUIDANCE PROMPTS ................................................. 93
3. DISTANCE AND TIME TO DESTINATION ........................................ 96
4. SETTING AND DELETING DESTINATIONS...................................... 97
ADDING DESTINATIONS .................................. 97
REORDERING DESTINATIONS...................... 97
DELETING DESTINATIONS ............................. 98
5. SETTING ROUTE ...................................... 99
DETOUR SETTING .................................................. 99
ROUTE OVERVIEW ............................................ 100
ROUTE PREFERENCE.......................................... 101
PAUSING AND RESUMING
GUIDANCE ........................................................... 103
SHOW ON MAP..................................................... 104
ROUTE TRACE ........................................................ 107
1. NAVIGATION SETTINGS ................... 108
SETTING UP THE “Home” .................................. 109
SETTING UP THE “Preset Destinations” .......... 111
SETTING UP THE “Address Book” .................. 114
SETTING UP THE “Areas to Avoid” ................. 119
DELETING PREVIOUS DESTINATIONS ................................................... 124
1. DETAILED NAVIGATION SETTINGS ................................................ 125
SCREENS FOR NAVIGATION
SETTINGS ................................................................ 125
2. VEHICLE SETTINGS .............................. 133
MAINTENANCE ..................................................... 133
VEHICLE CUSTOMIZATION ......................... 138
1. LIMITATIONS OF THE NAVIGATION SYSTEM .................... 139
2ROUTE GUIDANCE3ADDRESS BOOK
4SETUP
5GPS (GLOBAL POSITIONING
SYSTEM)
NAVIGATION SYSTEM

69
1. DESTINATION SEARCH
3
NAVIGATION SYSTEM
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
1Press the “MENU” button on the
Remote Touch. (See “Remote Touch”
on page 10.)
2Select “Destination” on the “Menu”
screen.
3Select “Go Home” .
zYo u r h o m e a d d r e s s i s set as the destination.
The navigation system performs a search
for the route.
4Select “OK”.
1Press the “MENU” button on the
Remote Touch. (See “Remote Touch”
on page 10.)
2Select “Destination” on the “Menu”
screen.
3Select any of the preset destination but-
tons ( 1-5).
zThe selected preset de stination point is set
as the destination. The navigation system
performs a search for the route. (See
“STARTING ROUTE GUIDANCE” on
page 87.)
4Select “OK”.
DESTINATION SEARCH BY
HOME
zTo use this function, it is necessary to set a
home address. (To register home, see
page 109.)
INFORMATION
●
If a home address has not been regis-
tered, a message confirming if it is desir-
able to set a home will be displayed, and
the setting screen will appear.
●Guidance starts from the current position
to the set home address if “OK” is
selected even while driving.
DESTINATION SEARCH BY
PRESET DESTINATIONS
z To use this function, it is necessary to set
preset destinations to the preset screen
buttons ( 1-5). (See “REGISTERING
PRESET DESTINATIONS” on page 112.)

71
1. DESTINATION SEARCH
3
NAVIGATION SYSTEM
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
6Input the street name and select “OK”.
7When the desired street name is found,
select the correspondi ng screen button.
zWhen the desired street name is selected,
the “Confirm Destination” screen may be
displayed. If “Go” is selected on the “Con-
firm Destination” screen, the navigation
system performs a search for the route.
(See “STARTING ROUTE GUIDANCE”
on page 87.)
8Input a house number.
z If the same address exists in more than 1
city, the current screen changes to the
address list screen.
■ SEARCHING FROM THE LAST 5
CITIES
1Select “Last 5 Cities” .
2Select the screen button of the desired
city name from the displayed list.
zThe current screen changes to the
screen for inputting a street name. (See
“SELECTING A CITY TO SEARCH” on
page 70.)
INFORMATION
●
If the navigation system has never been
used, this function will not be available.

72
1. DESTINATION SEARCH
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
1Press the “MENU” button on the
Remote Touch, then select
“Destination” .
2Select “Address” on the “Destination”
screen.
3Select “Street Address” .
4Select numbers directly on the screen to
input the house number.
zAfter inputting the house number, select
“OK” to display the screen for inputting the
street name.
5Input the street name and select “OK”.
6When the desired street name is found,
select the corresponding screen button.
zWhen the desired street name is selected,
the “Confirm Destination” screen may be
displayed. If “Go” is selected on the “Con-
firm Destination” screen, the navigation
system performs a search for the route.
(See “STARTING ROUTE GUIDANCE”
on page 87.)
z If the same address exists in more than 1
city, a screen requesting the city name to be
input or selected will be displayed.
7Input a city name.
8Select the screen button of the desired
city name from the displayed list.
SEARCH BY STREET ADDRESS

73
1. DESTINATION SEARCH
3
NAVIGATION SYSTEM
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
1Press the “MENU” button on the
Remote Touch. (See “Remote Touch”
on page 10.)
2Select “Destination” on the “Menu”
screen.
3Select “Point of Interest” on the “Desti-
nation” screen.
4Select the desired search method.
1Press the “MENU” button on the
Remote Touch, then select
“Destination” .
2Select “Point of Interest” on the “Desti-
nation” screen.
3Select “Name” on the “Point of Interest”
screen.
4Input the name of the POI.
5Select the screen button of the desired
destination.
z When the desired dest ination is selected,
the “Confirm Destination” screen may be
displayed. If “Go” is selected on the “Con-
firm Destination” screen, the navigation
system performs a search for the route.
(See “STARTING ROUTE GUIDANCE”
on page 87.)
z When inputting the name of a specific POI,
and there are 2 or more sites with the same
name, the list screen is displayed.
INFORMATION
●
A street name can be searched using
only the body part of its name.
●For example: S WESTERN AVE
• A search can be performed by inputting “S WESTERN AVE”, “WESTERN AVE”
or “WESTERN”.
DESTINATION SEARCH BY
“Point of Interest”
There are 4 methods to search a desti-
nation by Points of Interest:
(a) Search by name
(b) Search by category
(c) Search by phone #
(d) Search by eDestination
SEARCH BY “Name”

75
1. DESTINATION SEARCH
3
NAVIGATION SYSTEM
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
■SELECTING FROM THE CATEGO-
RIES
1Select “Category” .
2Select the screen button of the desired
category.
zIf the desired POI category is on the
screen, select its screen button to display a
detailed list of the POI category.
z If the desired POI category is not on the
screen, select “List All Categories” to list
all POI categories.
z When the desired category is selected, the
POI name list screen is displayed.
1Press the “MENU” button on the
Remote Touch, then select
“Destination” .
2Select “Point of Interest” on the “Desti-
nation” screen.
3Select “Category” .
4This screen is displayed.
SEARCH BY “Category”
The destination can be set by selecting
the search point an d the POI category.

77
1. DESTINATION SEARCH
3
NAVIGATION SYSTEM
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
■SELECTING FROM THE LAST 5
CITIES
1Select “Near a City Center in XX*” .
2Select “Last 5 Cities” .
3Select the screen button of the desired
city center name.
zThe search point is set and the “POI Cate-
gory” screen will be displayed. (See page
78.)
*: XX represents the selected search area
name.
■ SETTING THE SEARCH POINT
FROM NEAR A DESTINATION
1Select “Near a Destination” .
2Select the screen button of the desired
destination.
zThe search point is set and the “POI Cate-
gory” screen will be displayed. (See page
78.)

78
1. DESTINATION SEARCH
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
■TO SEARCH FOR POIs NEAR THE
SEARCH POINT
1Select the desired POI category.
zIf the desired POI category is not on the
screen, select “List All Categories” to list
all POI categories.
z If “Favorite POI Categories” is selected, a
search can be performed using the 6 POIs
that have been previously set. For more
details, see “POI CATEGORY CHANGE
(SELECT POI ICONS)” on page 129.
2Select the desired POI category from
the list.
3Select the screen button of the desired
item.
z When the desired item is selected, the
“Confirm Destination” screen may be dis-
played. If “Go” is selected on the “Confirm
Destination” screen, the navigation system
performs a search for the route. (See
“STARTING ROUTE GUIDANCE” on
page 87.)
When the search point is set, the “POI
Category” screen will be displayed.