LEXUS ES350 2023 User Guide

10
ES350_ES250_QG_OM06255U_(U)
QCeiling
Interior lights*1
Personal lights*1
Moon roof switches*1, 2
Panoramic moon roof switches*1, 2
“SOS” button*2........................................................................................................ P.68
Door-linked interior light switch
*1
Vanity mirrors*1
Sun visors*1
Inside rear view mirror*1
Garage door opener buttons................................................................................ P.63
*1: Refer to “OWNER’S MANUAL”.
*2: If equipped
A
B
C
D
E
F
G
H
I

11
ES350_ES250_QG_OM06255U_(U)
1Insert the retaining hooks (clips) into
the floor mat eyelets.
2Turn the upper knob of each retaining
hook (clip) to secure the floor mats in
place.
Always align the marks .
The shape of the retaining hooks (clips) may differ from that shown in the illustration.
Floor Mat Installation
Use only floor mats designed specifically for vehicles of the same model and model year
as your vehicle. Fix them securely in place onto the carpet.
A

12
ES350_ES250_QG_OM06255U_(U)
OSmart access system with push-button
start ( P.14)
O Wireless remote control
To take out the mechanical key, push the
release button and take the key out.
The mechanical key can only be inserted in
one direction, as the key only has grooves on
one side. If the key cannot be inserted in a lock
cylinder, turn it over and re-attempt to insert it.
After using the mechanical key, store it in
the electronic key. Carry the mechanical
key together with the electronic key. If the
electronic key battery is depleted or the
entry function does not operate properly,
you will need the mechanical key.
Keys
Electronic key
Mechanical key

13
ES350_ES250_QG_OM06255U_(U)
Locks the doors
Unlocks the doors
Opens the windows and moon roof
*1, 2
or panoramic moon roof *1, 2
Opens the trunk
Sounds the alarm
*1: If equipped
*2:This setting must be customized at yourLexus dealer.
Wireless remote control
A
B
C
D
E

14
ES350_ES250_QG_OM06255U_(U)
1Grip the driver’s door handle to unlock
the door. Holding the driver’s door
handle for approximately 2 seconds
unlocks all the doors. Grip the passen-
ger’s door handle to unlock all the
doors.
*
Make sure to touch the sensor on the
back of the handle.
The doors cannot be unlocked for
3 seconds after the doors are locked.
*: The door unlock settings can bechanged.
2Touch the lock sensor (the indentation on the upper part of the door handle) to lock all
the doors.
Check that the door is securely locked.
QUsing the outside button
While carrying the electronic key, press the
button.
When all the doors are unlocked using one
of the following methods, the trunk can be
opened without the electronic key:
O Entry function
O Wireless remote control
O Door lock switches
O Automatic door unlocking system
O Mechanical key
Smart Access System with Push-button Start
The following operations can be performed simply by carrying the electronic key (includ-
ing the card key) on your person, for example in your pocket. The driver should always
carry the electronic key.
For details on starting the engine, see page 17.
Unlocking and locking the doors from the outside
Opening the trunk

15
ES350_ES250_QG_OM06255U_(U)
QUsing the Hands Free Power Trunk Lid (vehicles with power trunk lid)
1
While carrying an electronic key, stand within the smart access system with push-but-
ton start operation range, approximately 11.8 to 19.7 in. (30 to 50 cm) from the rear
bumper.
Kick sensor
Hands Free Power Trunk Lid operation
detection area
Smart access system with push-button
start operation detection area
2Perform a kick operation by moving your foot to within approximately 3.9 in. (10 cm) of
the rear bumper, and then pulling your foot back after the buzzer sounds.
Kick sensor
Hands Free Power Trunk Lid operation
detection area
3When the kick sensor detects that your foot is pulled back, a buzzer will sound and the
trunk will automatically fully open.
A
B
C
A
B
For details on what to do when the electronic key does not operate properly, see page 79.

16
ES350_ES250_QG_OM06255U_(U)
Seat position adjustment
Seatback angle adjustment
Seat cushion (front) angle adjustment
Vertical height adjustment
Lumbar support adjustment
Pelvic support adjustment (if equipped
for driver’s side)
Seat cushion length adjustment (if
equipped)
Front Seats
Adjustment procedure
A
B
C
D
E
F
G

17
ES350_ES250_QG_OM06255U_(U)
1Press the parking brake switch to
check that the parking brake is set.
( P.24)
Parking brake indicator will come on.
2Check that the shift lever is in P
3Firmly depress the brake pedal.
and a message will be dis-
played on the multi-information dis-
play. If it is not displayed, the engine
cannot be started.
4Press the engine switch shortly and firmly.
When operating the engine switch, one short, firm press is enough. It is not necessary
to press and hold the switch.
The engine will crank until it starts or for up to 30 seconds, whichever is less. Continue
depressing the brake pedal until the engine is completely started.
The engine can be started from any engine switch mode.
Engine (Ignition) Switch
Performing the following operations when carrying the electronic key on your person
starts the engine or chan ges engine switch modes.
Starting the engine

18
ES350_ES250_QG_OM06255U_(U)
1Stop the vehicle completely.
2Set the parking brake (P.24), and shift the shift lever to P ( P.20).
3Press the engine switch.
4Release the brake pedal and check that “ACCESSORY” or “IGNITION ON” is not
shown on the meter.
Modes can be changed by pressing the engine switch with the brake pedal released. (The
mode changes each time the switch is pressed.)
1Off*
The emergency flashers can be used.
2ACCESSORY mode
Some electrical components such as
the audio system can be used.
“ACCESSORY” will be displayed on
the meter.
3IGNITION ON mode
All electrical components can be used.
“IGNITION ON” will be displayed on
the meter.
*: If the shift lever is in a position other than
P when turning off the engine, the
engine switch will be turned to ACCES-
SORY mode, not to off.
Stopping the engine
Changing engine switch modes

19
ES350_ES250_QG_OM06255U_(U)
Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way,
stop the vehicle using the following procedure:
1Steadily step on the brake pedal with both feet and firmly depress it.
Do not pump the brake pedal repeatedly as this will increase the effort required to slow
the vehicle.
2Shift the shift lever to N.
 If the shift lever is shifted to N
3After slowing down, stop the vehicle in a safe place by the road.
4Stop the engine.
 If the shift lever cannot be shifted to N
3Keep depressing the brake pedal with both feet to reduce vehicle speed as much as
possible.
4To stop the engine, press and hold the
engine switch for 2 consecutive sec-
onds or more, or press it briefly 3 times
or more in succession.
5Stop the vehicle in a safe place by the road.
If your vehicle has to be stopped in an emergency