Lexus GS250 2014 Owner's Manual

531 6-3. Do-it-yourself maintenance
6
Maintenance and care
GS350_250_OM_OM30E16E_(EE)
CAUTION
■Replacing light bulbs
●Turn off the lights. Do not attempt to replace the bulb immediately after turning
off the lights.
The bulbs become very hot and may cause burns.
●Do not touch the glass portion of the light bulb with bare hands. When it is
unavoidable to hold the glass portion, use and hold with a clean dry cloth to avoid
getting moisture and oils on the bulb.
Also, if the bulb is scratched or dropped, it may blow out or crack.
●Fully install light bulbs and any parts used to secure them. Failure to do so may
result in heat damage, fire, or water entering the headlight unit. This may damage
the headlights or cause condensation to build up on the lens.
●While the headlights are turned on, and for
a short time after they have been turned off,
metal components at the rear of the head-
light assembly will be extremely hot. To pre-
vent burns, do not touch these metal
components until you are certain they have
cooled down.
Metal components
GS350_250_OM_OM30E16E_(EE).book Page 531 Tuesday, July 8, 2014 7:11 PM

5326-3. Do-it-yourself maintenance
GS350_250_OM_OM30E16E_(EE)
CAUTION
■Discharge headlights
●Contact any authorized Lexus dealer or repairer, or another duly qualified and
equipped professional before replacing the discharge headlights (including light
bulbs).
●Do not touch the discharge headlight’s high voltage socket when the headlights
are turned on.
An extremely high voltage of 30000 V will be discharged and could result in
death or serious injury by electric shock.
●Do not attempt to take apart or repair the headlight bulbs, connectors, power
supply circuits, or related components.
Doing so could result in electric shock and death or serious injury.
■To prevent damage or fire
●Make sure bulbs are fully seated and locked.
●Check the wattage of the bulb before installing to prevent heat damage.
NOTICE
■When replacing the outer foot lights
If the front window is stopping you from conducting the replace operation prop-
erly, open the window on the side you are working on to allow you enough space to
work. Continuing the operation without giving yourself enough space to work
could lead you to scratch the vehicle.
GS350_250_OM_OM30E16E_(EE).book Page 532 Tuesday, July 8, 2014 7:11 PM

533
7When trouble arises
GS350_250_OM_OM30E16E_(EE)
7-1. Essential informationEmergency flashers...................534
If your vehicle has to be stopped
in an emergency ......................535 7-2. Steps to take in an emergency
If your vehicle needs to be towed................................ 536
If you think something is wrong....................................... 542
Fuel pump shut off system ...... 543
If a warning light turns on or a warning buzzer sounds..... 544
If a warning message is displayed ................................ 552
If you have a flat tire (vehicles with a spare tire) .......................577
If you have a flat tire (vehicles without a spare tire) ............... 592
If the engine will not start .......... 612
If the shift lever cannot be shifted from P..............................614
If the parking brake cannot be released...................615
If the electronic key does not operate properly ...................... 618
If the vehicle battery is discharged ...............................621
If your vehicle overheats ......... 625
If the vehicle becomes stuck ......................... 628
GS350_250_OM_OM30E16E_(EE).book Page 533 Tuesday, July 8, 201 4 7:11 PM

5347-1. Essential information
GS350_250_OM_OM30E16E_(EE)
Emergency flashers
Press the switch.
All the turn signal lights will flash.
To turn them off, press the switch once
again.
■Emergency flashers
If the emergency flashers are used for a long time while the engine is not operating,
the battery may discharge.
The emergency flashers are used to warn other drivers when the vehi-
cle has to be stopped in the road due to a breakdown, etc.
GS350_250_OM_OM30E16E_(EE).book Page 534 Tuesday, July 8, 2014 7:11 PM

535
7
7-1. Essential information
When trouble arises
GS350_250_OM_OM30E16E_(EE)
If your vehicle has to be stopped in an emergency
Steadily step on the brake pedal wi
th both feet and firmly depress it.
Do not pump the brake pedal repeatedly as this will increase the effort required to
slow the vehicle.
Shift the shift lever to N.
XIf the shift lever is shifted to N
After slowing down, stop the vehicle in a safe place by the road.
Stop the engine.
XIf the shift lever cannot be shifted to N
Keep depressing the brake pedal with both feet to reduce vehicle
speed as much as possible.
To stop the engine, press and
hold the engine switch for 2 con-
secutive seconds or more, or
press it briefly 3 times or more in
succession.
Stop the vehicle in a safe place by the road.
Only in an emergency, such as if it becomes impossible to stop the vehi-
cle in the normal way, stop the ve hicle using the following procedure:
1
2
3
4
3
Press and hold for 2 seconds or more
or press briefly 3 times or more
4
CAUTION
■If the engine has to be turned off while driving
Power assist for the brakes and steering wheel will be lost, making the brake pedal
harder to depress and the steering wheel heavier to turn. Decelerate as much as
possible before turning off the engine.
5
GS350_250_OM_OM30E16E_(EE).book Page 535 Tuesday, July 8, 201 4 7:11 PM

5367-2. Steps to take in an emergency
GS350_250_OM_OM30E16E_(EE)
If your vehicle needs to be towed
The following may indicate a problem with your transmission. Contact any
authorized Lexus dealer or repairer, or another duly qualified and
equipped professional or commercial towing service before towing.
●The engine is running but the vehicle will not move.
●The vehicle makes an abnormal sound.
If towing is necessary, we recommen d having your vehicle towed by any
authorized Lexus dealer or repairer, or another duly qualified and
equipped professional or commercial towing service, using a wheel-lift
type truck or flatbed truck.
Use a safety chain system for all to wing, and abide by all state/provin-
cial and local laws.
Situations need to contact dealers before towing
GS350_250_OM_OM30E16E_(EE).book Page 536 Tuesday, July 8, 201 4 7:11 PM

5377-2. Steps to take in an emergency
7
When trouble arises
GS350_250_OM_OM30E16E_(EE)
Do not tow with a sling-type truck to
prevent body damage.
Towing with a sling-type truck
Towing with a wheel-lift type truck
XFrom the frontXFrom the rear
Use a towing dolly under the rear
wheels. Use a towing dolly under the front
wheels.
GS350_250_OM_OM30E16E_(EE).book Page 537 Tuesday, July 8, 201
4 7:11 PM

5387-2. Steps to take in an emergency
GS350_250_OM_OM30E16E_(EE)
If your Lexus is transported by a flat-
bed truck, it should be tied down at
the locations shown in the illustra-
tion.
If you use chains or cables to tie
down your vehicle, the angles
shaded in black must be 45°.
Do not overly tighten the tie downs
or the vehicle may be damaged.
If a tow truck is not available in an emergency, your vehicle may be tempo-
rarily towed using a cable or chain secured to the emergency towing eye-
let. This should only be attempted on hard surfaced roads for 80 km
(50miles) at low speeds.
A driver must be in the vehicle to steer and operate the brakes. The vehi-
cle’s wheels, drive train, axles, steer ing and brakes must be in good condi-
tion.
Using a flatbed truck
Emergency towing
GS350_250_OM_OM30E16E_(EE).book Page 538 Tuesday, July 8, 201 4 7:11 PM

5397-2. Steps to take in an emergency
7
When trouble arises
GS350_250_OM_OM30E16E_(EE)
Take out the towing eyelet. (→P. 578, 593)
Remove the eyelet cover using a
flathead screwdriver.
To protect the bodywork, place a rag
between the screwdriver and the vehi-
cle body as shown in the illustration.
Insert the towing eyelet into the
hole and tighten partially by hand.
Tighten down the towing eyelet
securely using a wheel nut
wrench or hard metal bar.
Securely attach a cable or chain to the towing eyelet.
Take care not to damage the vehicle body.
Enter the vehicle being towed and start the engine.
If the engine does not start, turn the engine switch to IGNITION ON mode.
Shift the shift lever to N and release the parking brake.
When the shift lever cannot be shifted: →P. 6 1 4
Installing towing eyelet
1
2
3
4
5
6
7
GS350_250_OM_OM30E16E_(EE).book Page 539 Tuesday, July 8, 201 4 7:11 PM

5407-2. Steps to take in an emergency
GS350_250_OM_OM30E16E_(EE)
■While towing
If the engine is not running, the power assist for the brakes and steering will not func-
tion, making steering and braking more difficult.
■Wheel nut wrench
Wheel nut wrench is installed in trunk. (→P. 5 7 8 , 5 9 3 )
CAUTION
Observe the following precautions.
Failure to do so may result in death or serious injury.
■When towing the vehicle
■While towing
●When towing using cables or chains, avoid sudden starts, etc. which place exces-
sive stress on the towing eyelet, cables or chains. The towing eyelet, cables or
chains may become damaged, broken debris may hit people and cause serious
damage.
●Do not turn the engine switch off.
There is a possibility that the steering wheel is locked and cannot be operated.
■Installing towing eyelet to the vehicle
Make sure that towing eyelet is installed securely.
If not securely installed, towing eyelet may come loose during towing.
2WD models:
Be sure to transport the vehicle with all four
wheels raised off the ground. If the vehicle is
towed with the tires contacting the ground,
the drivetrain and related parts may be dam-
aged or an accident may occur due to a
change in direction of the vehicle.
AW D m o d e l s :
Be sure to transport the vehicle with all four
wheels raised off the ground. If the vehicle is
towed with the tires contacting the ground,
the drivetrain or related parts may be dam-
aged, the vehicle may fly off the truck.
GS350_250_OM_OM30E16E_(EE).book Page 540 Tuesday, July 8, 201 4 7:11 PM