Lexus GX460 2017 Navigation Manual

99
2. DESTINATION SEARCH
GX460_Navi_OM60N98U_(U)16.05.30 14:27
3
NAVIGATION SYSTEM
1Display the “Destination” screen.
(→ P.97)
2Select any of the preset destination but-
tons ( 1-5).
zThe navigation system performs a search
for the route and the entire route map is
displayed. ( →P.110)
1Display the “Destination” screen.
(→ P.97)
2Select “Address”.
3Select the desired search method.
SETTING PRESET
DESTINATIONS AS
DESTINATION
To use this function, it is necessary to
register preset destinations to the preset
screen buttons (1-5). ( →P.132)
SEARCHING BY ADDRESS
There are 2 methods to search for a des-
tination by address.
No.FunctionPage
Select to search by city.100
Select to search by street
address.100
GX_Navi_OM60N98U_(U).book Page 99 Monday, May 30, 2016 2:28 PM

100
2. DESTINATION SEARCH
GX460_Navi_OM60N98U_(U)16.05.30 14:27
1Select “City”.
2Enter a city name and select “OK”.
“Last 5 Cities” : Select the city name from
the list of the last 5 cities.
3Select the desired city name.
4Enter a street name and select “OK”.
5Select the desired street name.
6Enter a house number and select “OK”.
zIf the same address exists, the address list
screen will be displayed. Select the desired
address.
1Select “Street Address” .
2Enter a house number and select “OK”.
3Enter a street name and select “OK”.
4Select the desired street name.
5Enter a city name and select “OK”.
6Select the desired city name.
zIf the same address exists, the address list
screen will be displayed. Select the desired
address.
SEARCHING BY CITYSEARCHING BY STREET
ADDRESS
INFORMATION
●
A street name can be searched using
only the body part of its name.
For example: S WESTERN AVE
• A search can be performed by entering “S WESTERN AVE”, “WESTERN AVE”
or “WESTERN”.
GX_Navi_OM60N98U_(U).book Page 100 Monday, May 30, 2016 2:28 PM

101
2. DESTINATION SEARCH
GX460_Navi_OM60N98U_(U)16.05.30 14:27
3
NAVIGATION SYSTEM
1Display the “Destination” screen.
(→ P.97)
2Select “Point of Interest” .
3Select the desired search method.
1Select “Name” .
2Enter a POI name and select “OK”.
3Select the desired POI.
zWhen entering the name of a specific POI,
and there are 2 or more sites with the same
name, the list screen will be displayed.
Select the desired POI.
SEARCHING BY POINT OF
INTEREST
There are 4 methods to search for a des-
tination by Points of Interest.
No.FunctionPage
Select to search by name.101
Select to search by catego-
ry.103
Select to search by phone
number.105
Select to search by eDesti-
nation.370
SEARCHING BY NAME
No.FunctionPage
Select to search for POI in
the desired city.102
Select to search for POI
from the category list.102
Select to search for POI us-
ing online database.102
INFORMATION
●
To search for a facility name using multi-
ple search words, put a space between
each word.
GX_Navi_OM60N98U_(U).book Page 101 Monday, May 30, 2016 2:28 PM

102
2. DESTINATION SEARCH
GX460_Navi_OM60N98U_(U)16.05.30 14:27
■SELECTING A CITY TO SEARCH
1Select “City”.
2Enter a city name and select “OK”.
“A n y C i t y ” : Select to cancel the city setting.
3Select the desired city name.
4Select the desired POI.
■SELECTING FROM THE CATEGO-
RIES
1Select “Category” .
2Select the desired category.
zIf there is more than 1 detailed item of the
selected category, the detailed list will be
displayed.
“List All Categories” : Select to display all
POI categories.
3Select the desired POI.
■ SEARCHING FOR POI USING
WEB SEARCH
1Select “ T” next to “Web Search” to se-
lect a search engine.
2Select the desired search engine icon.
z The selected search engine icon will be dis-
played on the top center of the POI list
screen.
GX_Navi_OM60N98U_(U).book Page 102 Monday, May 30, 2016 2:28 PM

103
2. DESTINATION SEARCH
GX460_Navi_OM60N98U_(U)16.05.30 14:27
3
NAVIGATION SYSTEM
3Select the search engine icon.
1Select “Categor y” .
2Select the desired search point.
zAccessing to a search engine
For the procedure on how to conduct a
search via a search engine, go to
“SETTING A DESTINATION USING
LEXUS App Suite” ( →P.363), and fol-
low the steps from 3 onward.
SEARCHING BY CATEGORY
No.Function
Select to set the search point from
near the current position.
Select to search for POIs along the
set route.
Select to set the search point from
near a city center. ( →P.104)
Select to set the search point from
near a destination.
GX_Navi_OM60N98U_(U).book Page 103 Monday, May 30, 2016 2:28 PM

104
2. DESTINATION SEARCH
GX460_Navi_OM60N98U_(U)16.05.30 14:27
3Select the desired POI category.
zIf there is more than 1 detailed item of the
selected category, the detailed list will be
displayed.
“List All Categories” : Select to display all
POI categories.
“Favorite POI Categories” : Select to use
the 6 POIs that have been previously set.
( → P.143)
4Select the desired POI.
“Web Search” : Select to search for POI us-
ing online database. ( →P.102) X
When “Near a City Center in XX*” is se-
lected
1Select “Near a City Center in XX” .
2Enter a city name and select “OK”.
“Last 5 Cities” : Select the city name from
the list of the last 5 cities.
3Select the desired city name.
4Select “OK” when the city center map
screen is displayed.
5Follow the steps from 3 onward in
“SEARCHING BY CATEGORY”.
( → P.103)
*: XX represents the selected search area
name.
INFORMATION
●
The names of POIs located within
approximately 200 miles (320 km) from
the selected search point can be dis-
played.
INFORMATION
●
If the navigation system has never been
used, selecting the city name from “Last 5
Cities” will not be available.
GX_Navi_OM60N98U_(U).book Page 104 Monday, May 30, 2016 2:28 PM

105
2. DESTINATION SEARCH
GX460_Navi_OM60N98U_(U)16.05.30 14:27
3
NAVIGATION SYSTEM
1Select “Phone #” .
2Enter a phone number and select “OK”.
zIf there is more than 1 site with the same
number, the list screen will be displayed.
SEARCHING BY PHONE
NUMBER
INFORMATION
●
If there is no match for the entered phone
number, a list of identical numbers with
different area codes will be displayed.
DESTINATION SEARCH BY
DESTINATION ASSIST
The destination can be searched by call-
ing an operator of Destination Assist.
You can request either a specific busi-
ness, address, or ask for help locating
your desired destination. ( →P.367)
GX_Navi_OM60N98U_(U).book Page 105 Monday, May 30, 2016 2:28 PM

106
2. DESTINATION SEARCH
GX460_Navi_OM60N98U_(U)16.05.30 14:27
1Display the “Destination” screen.
(→ P.97)
2Select “Previous Destinations” .
3Select the desired destination.
“Previous Start Point” : Select to display the
start point map of the previous guided
route.
“Delete” : Select to delete the previous des-
tination. ( →P.140)1Display the “Destination” screen.
(→ P.97)
2Select “Address Book” .
3Select the desired address book entry.
“Options” : Select to register or edit address
book entries. ( →P.135)
SEARCHING FROM
PREVIOUS DESTINATIONS
INFORMATION
●
The previous start point and up to 100
previously set destinations are displayed
on the screen.
SEARCHING BY ADDRESS
BOOK
To use this function, it is necessary to
register an address book entry.
( → P.134)
GX_Navi_OM60N98U_(U).book Page 106 Monday, May 30, 2016 2:28 PM

107
2. DESTINATION SEARCH
GX460_Navi_OM60N98U_(U)16.05.30 14:27
3
NAVIGATION SYSTEM
1Display the “Destination” screen.
(→ P.97)
2Select “Emergency” .
3Select the desired emergency category.
4Select the desired destination.
1Display the “Destination” screen.
(→ P.97)
2Select “Intersection & Freeway” .
3Select the desired method.
SEARCHING BY
EMERGENCY
INFORMATION
●
The navigation system does not guide in
areas where route guidance is unavail-
able. ( →P.1 5 0 )
SEARCHING BY
INTERSECTION AND
FREEWAY
There are 2 methods to search for a des-
tination by Intersection & Freeway.
No.FunctionPage
Select to search by inter-
section.108
Select to search by freeway
entrance/exit.108
GX_Navi_OM60N98U_(U).book Page 107 Monday, May 30, 2016 2:28 PM

108
2. DESTINATION SEARCH
GX460_Navi_OM60N98U_(U)16.05.30 14:27
1Select “Intersection” .
2Enter the name of the first intersecting
street which is located near the destina-
tion and select “OK”.
3Select the desired street name.
4Enter the name of the second intersect-
ing street and select “OK”.
5Select the desired street name.
zIf the 2 streets cross at more than 1 inter-
section in a city, the list of intersections will
be displayed.
1Select “Freeway Entrance / Exit” .
2Enter a freeway name and select “OK”.
3Select the desired freeway.
4Select “Entrance” or “Exit” .
5Enter the name of the second intersect-
ing street and select “OK”.
6Select the desired entrance or exit
name.
SEARCHING BY
INTERSECTIONSEARCHING BY FREEWAY
ENTRANCE/EXIT
INFORMATION
●
Be sure to use the complete name of the
freeway or highway, including the hyphen,
when entering the destination. Freeways
and interstates use an “I” (I-405). US
highways use the state designation before
the number (CA-118).
GX_Navi_OM60N98U_(U).book Page 108 Monday, May 30, 2016 2:28 PM