navigation system Lexus IS250 2014 Navigation Manual

168
4. MY MEMORY
IS300h/250_Navi_EE
6Select “Start backup”.
“Set password”: Select to set a password.
(→P.168)
7Enter the password and select “OK”.
8Check that a progress bar is being dis-
played while the data backup is in
progress.
zTo cancel this function, select “Cancel”.
9Check that a confirmation screen is dis-
played when the operation is complete.
1Select “Set password”.
2Enter a password and select “OK”.
3For confirmation, re-enter the pass-
word.
INFORMATION
●
In the following situations, the memory
point cannot be backed up to a USB
memory:
• When the memory point was registered
using “UK Postal code” or “NL Postal
code”
• When the memory point was registered
using connected service
SETTING PASSWORD
Once a password has been set, it will be
requested not only to back up data, but
also when copying memory points from
a USB memory to the navigation system.
INFORMATION
●
If you have forgotten the password:
• It is necessary to initialize personal data
using “Delete personal data”. (→P. 8 2 )
• Contact any authorized Lexus dealer or
repairer, or another duly qualified and
equipped professional.
IS_Navi_EE_53C71E.book 168 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

169
4. MY MEMORY
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
1Display the “My memory” screen.
(→P.150)
2Select “Copy from USB”.
zIf a password has already been set, enter
the password. For instructions on setting a
password: →P.1 6 8
zIf there are multiple memory points stored
on the USB memory, select the memory
points to be copied and select “Start”.
3Check that a progress bar is being dis-
played while the data copy is in
progress.
zTo cancel this function, select “Cancel”.
4Check that a confirmation screen is dis-
played when the operation is complete.
COPYING FROM A USB
MEMORY
Memory points that have been backed
up can be downloaded to the navigation
system using a USB memory.
To use this function, it is necessary to
connect a USB memory to the system.
(→P.167)
INFORMATION
●
Memory points that are located outside
of the map’s data range cannot be regis-
tered.
●A maximum of 500 memory points can
be registered.
●When there are 21 or more memory
points stored on a USB memory, only 20
memory points will be displayed at a time.
●If memory points which have the same
name are already stored in the navigation
system, the system may not update those
memory points.
IS_Navi_EE_53C71E.book 169 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

171
5. SETUP
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
NAVIGATION SETTINGS
SCREEN
No.FunctionPage
Detailed connected service
settings can be changed.389
Select to set the average
vehicle speed.172
Select to set displayed POI
icon categories.172
Select to set display of 3D
landmarks on/off.
Select to set speed limit in-
formation on/off.
Select to set the automatic
zooming function on/off.
(When the vehicle ap-
proaches a guidance point)

Select to set display of cau-
tionary messages on/off.
(e.g., When the route in-
cludes traffic restrictions or
seasonally restricted
roads.)

Select to set display of pop-
up messages on/off.
Select to adjust the current
position mark manually.
Miscalculation of the dis-
tance caused by tyre re-
placement can also be
adjusted.
173
Coverage areas and legal
information can be dis-
played.187
Select to reset all setup
items.
No.FunctionPage
IS_Navi_EE_53C71E.book 171 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

173
5. SETUP
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
1Display the “Navigation settings”
screen. (→P.170)
2Select “Calibration”.
3Select the desired item.
■POSITION/DIRECTION CALI-
BRATION
1Select “Position / Direction”.
2Scroll the map to the desired point
(→P.103) and select “OK”.
3Select an arrow to adjust the direction of
the current position mark and select
“OK”.
CURRENT POSITION/TYRE
CHANGE CALIBRATION
The current position mark can be adjust-
ed manually. Miscalculation of the dis-
tance caused by tyre replacement can
also be adjusted.
zFor additional information on the accu-
racy of a current position: →P.1 8 4
When driving, the current position mark
will be automatically corrected by GPS
signals. If GPS reception is poor due to
location, the current position mark can
be adjusted manually.
IS_Navi_EE_53C71E.book 173 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

175
5. SETUP
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
2. TRAFFIC AND PARKING SETTINGS
1Press the “MENU” button on the
Remote Touch.
2Select “Setup”.
3Select “Info”.
4Select “Traffic” or “Parking”.
5Select the items to be set.
Settings are available for displaying traf-
fic information icons, receivable traffic
stations, parking information icons etc.
IS_Navi_EE_53C71E.book 175 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

177
5. SETUP
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
1Display the “Traffic info settings” screen.
(→P.175)
2Select “Show traffic info”.
3Select the desired icons to be displayed
on the map screen.
“A l l o n ”: Select to select all icons in the traffic
information.
“A l l o f f ”: Select to cancel all the selections.
Traffic information can set
to be received automatical-
ly, or to receive RDS-TMC
traffic information only.
182
Select to set display of
parking icons on the map
screen on/off.
Select to receive parking
lot information.182
Select to enable the roam-
ing function of parking lot
information.183
Select to reset all setup
items.
No.FunctionPageSHOW TRAFFIC INFO
zFor more details on traffic information
icons: →P.1 0 9
IS_Navi_EE_53C71E.book 177 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

178
5. SETUP
IS300h/250_Navi_EE
1Display the “Traffic info settings” screen.
(→P.175)
2Select “Avoid traffic events”.
3Select the desired item.
■CHANGING THE ROUTE MANU-
ALLY
1Select the desired item.
AVOID TRAFFIC EVENTS
No.Function
Select to automatically change
routes when traffic information of the
guidance route has been received.
Select to select manually whether or
not to change routes when traffic in-
formation of the guidance route has
been received. In this mode, a screen
will appear to ask if you wish to re-
route. (→P.178)
Select to not reroute when traffic in-
formation for the guidance route has
been received.
When the navigation system calculates
a new route, the following screen will be
displayed.
No.Function
Select to start route guidance using
the new route.
Select to confirm the new route and
current route on the map screen.
“New route” or “Old route” can be
selected.
Select to continue the current route
guidance.
IS_Navi_EE_53C71E.book 178 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

179
5. SETUP
IS300h/250_Navi_EE
NAVIGATION SYSTEM
31Display the “Traffic info settings” screen.
(→P.175)
2Select “RDS-TMC station”.
3Select “Manual”.
zA list of traffic stations and the country in
which it can be received is displayed.
4Select the desired traffic station.
“Search”: Select to search for traffic station
again.
1Display the “Traffic info settings” screen.
(→P.175)
2Select “Live update (Internet) (Wi-Fi*1
& Bluetooth*2)”.
*
1: Wi-Fi is a registered mark of the Wi-Fi
Alliance®.
*
2: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
RDS-TMC STATION
If “Manual” is selected, traffic stations
must be searched for before being
memorized.SETTING TPEG TRAFFIC
INFORMATION UPDATE
FREQUENCY
TPEG traffic information can be re-
ceived via Wi-Fi
® or a Bluetooth® de-
vice. This information can be set to
update automatically or manually.
IS_Navi_EE_53C71E.book 179 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

181
5. SETUP
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
1Display the “Traffic info settings” screen.
(→P.175)
2Select “Live update (Internet) (Roam-
ing with Bluetooth*)”.
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
3Select the desired item.ENABLING TPEG TRAFFIC
INFORMATION ROAMING
The roaming function of TPEG traffic in-
formation received via a Bluetooth
® de-
vice can be enabled for roaming
situations (when outside the geographi-
cal coverage area of your mobile net-
work provider). This information can be
set to update automatically or manually.
No.Function
Select to update automatically more
frequently.
Select to update automatically less
frequently.
Select to update manually.
(→P.180)
Select to cancel TPEG traffic infor-
mation reception via a Bluetooth®
device.
IS_Navi_EE_53C71E.book 181 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

183
5. SETUP
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
1Display the “Parking info settings”
screen. (→P.175)
2Select “Live update (Internet) (Roam-
ing with Bluetooth*)”.
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
3Select the desired item.ENABLING PARKING LOT
INFORMATION ROAMING
The roaming function of parking lot in-
formation received via a Bluetooth
® de-
vice can be enabled for roaming
situations (when outside the geographi-
cal coverage area of your mobile net-
work provider). This information can be
set to update automatically or manually.
No.Function
Select to update automatically.
Select to update manually.
(→P.180)
Select to cancel parking lot informa-
tion reception via a Bluetooth® de-
vice.
IS_Navi_EE_53C71E.book 183 ページ ２０１４年５月２９日　木曜日　午前１１時２２分