display Lexus IS250 2015 Navigation Manual

96
1. BASIC OPERATION
IS250/350_Navi_U
XWhen “Near...” is selected
1Select the desired item.
“Near Here” : Select to search for POIs
near the current position.
“A l o n g M y R o u t e ” : Select to search for
POIs along the route.
1Display the “Map Information” screen.
( → P. 93)
2Select “Route Trace”.
zThe “Route Trace” indicator illuminates and
the route trace starts.
3Check that the traveled line is displayed.
ROUTE TRACE
The traveled route can be stored and re-
traced on the map screen. This feature is
available when the map scale is 30 miles
(50 km) or less.

97
1. BASIC OPERATION
IS250/350_Navi_U
NAVIGATION SYSTEM
3
■STOP RECORDING THE ROUTE
TRACE
1Select “Route Trace” again.
2A confirmation screen will be displayed.
“Yes”: Select to keep the recorded
route trace.
“No” : Select to erase the recorded
route trace.
1Place the cursor over an icon.
2Select “Info”.
X POI information
X Memory point information
INFORMATION
●The traveled route can be stored up to
124 miles (200 km).
DISPLAYING INFORMATION
ABOUT THE ICON WHERE
THE CURSOR IS SET
When the cursor is placed over an icon
on the map screen, the name bar is dis-
played on the upper part of the screen. If
“Info” appears on the right side of the
name bar, detailed information can be
displayed.

98
1. BASIC OPERATION
IS250/350_Navi_U
XDestination information
X Traffic informationNo.Function
Select to register as a memory point.
To change the icon, name, etc.:
→P.
144
Select to set as a destination.
Select to call the registered number.
Select to delete destination or memo-
ry point.
Select to display the edit memory
point screen.
Select to display detailed information.
INFORMATION
● Even when traffic information is not cur-
rently being received, traffic information
and “Info” will be displayed for a while
after traffic information has been
received.

100
1. BASIC OPERATION
IS250/350_Navi_U
4. TRAFFIC INFORMATION
1Press the “MENU” button on the
Remote Touch.
2Select “Info”.
3Select “Traffic Incidents” .
4Select the desired item.Traffic data can be received via HD Ra-
dio broadcast or LEXUS App Suite to
display traffic information on the map
screen.
No.FunctionPage
Select to display a list of
current traffic information.101
Select to display a map with
predictive traffic data.102

101
1. BASIC OPERATION
IS250/350_Navi_U
NAVIGATION SYSTEM
3
1Display the “Traffic” screen. (→P. 100)
2Select “Traffic Event List” .
3Select the desired traffic information.
“On Current Road” : Select to display traffic
information for the current road.
“On Current Route” : Select to display traf-
fic information for the set route.
z When set to on, the indicator will illuminate.
4Check that the traffic information is dis-
played.
“Detail”: Select to display detailed traffic in-
formation.DISPLAYING TRAFFIC
INFORMATION
A list of current traffic information can
be displayed along with information on
the location and the distance of the inci-
dent.

102
1. BASIC OPERATION
IS250/350_Navi_U
1Display the “Traffic” screen. (→P. 100)
2Select “Predictive Traffic Map” .
3Scroll the map to the desired point and
set the time of predictive traffic informa-
tion. Then select “Info”.
zThe time of the predictive traffic informa-
tion can be displayed in 15-minute steps up
to +45 minutes.
“+”: Moves the time forward 15 minutes.
“-”: Moves the time back 15 minutes.
4Check that the traffic information is dis-
played.
“Detail” : Select to display detailed traffic in-
formation.DISPLAYING PREDICTIVE
TRAFFIC INFORMATION
A map with predictive traffic data can be
displayed.

103
1. BASIC OPERATION
IS250/350_Navi_U
NAVIGATION SYSTEM
3
1Select “Options” on the map screen.
2Select “Map Information” .
3Select “Traffic Information” .
zWhen set to on, the indicator will illuminate.
4Check that the traffic information is dis-
played.
X On the map screen
X On the freeway information screenDISPLAYING TRAFFIC
INFORMATION ON THE MAP

104
1. BASIC OPERATION
IS250/350_Navi_U
No.Information/Function
The icons show traffic incident, road
repair, traffic obstacles, etc. Select to
display traffic information and start
voice guidance for the traffic infor-
mation.
The color of the arrow changes de-
pending on the traffic information re-
ceived.
The indicator is displayed as follows.: Traffic information has
been received.
: Traffic information has
been received via HD Radio broad-
cast.
No icon: Any traffic information has
not been received.

105
IS250/350_Navi_U
NAVIGATION SYSTEM
3
2. DESTINATION SEARCH
1. DESTINATION SEARCH SCREEN
The “Destination” screen enables to search for a destination. To display the “Destina-
tion” screen, press the “MENU” button on the Remote Touch, and select “Nav” on the
“Menu” screen. Then select “Dest.” on the map screen.
No.FunctionPage
Select to search for a destination by address. 110
Select to search for a destination by point of interest. 111
Select to search for a destination by online database. 369
Select to search for a destination via the Lexus response center.374
Select to search for a destination from previously set destinations.116
Select to search for a destination from a registered entry in “Address
Book”.117
Select to search for a destination from emergency service points.117
Select to search for a destination by intersection or freeway entrance/
exit.118
Select to search for a destination by the last displayed map.119
Select to search for a destination by coordinates.120

108
2. DESTINATION SEARCH
IS250/350_Navi_U
5Select “Go” when the confirm destina-
tion screen is displayed.
1Display the “Destination” screen.
( → P. 107)
2Select “Address”, “Point of Interest” or
“Intersection & Freeway”.
3Select “Select State/Province” or
“Change State/Province” .
zIf a state (province) has not been selected
yet, “Select State/Province” is displayed.
4Select the desired state (province).
zTo change countries, select the “United
States” , “Canada” or “Mexico” tab.
z For map database information and updates:
→ P. 1 6 3
No.Function
Select to adjust the position in small-
er increments. ( →P. 92)
Select to register as a memory point.
Select to search for the route.
(→ P. 121)
If a destination has already been set,
“Go Directly” and “Add to Route”
will be displayed.
“Go Directly” : Select to delete the
existing destination(s) and set a new
one.
“Add to Route” : Select to add a des-
tination.
Select to call the registered number.
SELECTING SEARCH AREA
The selected state (province) can be
changed to set a destination from a
different state (province) by using
“Address” , “Point of Interest” or
“Intersection & Freeway”.