ad blue Lexus IS300h 2014 Navigation manual

61
2. NETWORK SETTINGS
IS300h/250_Navi_EE
BASIC FUNCTION
2
■AUTO CONNECTION MODE
zWhen the engine <power> switch is in
ACCESSORY or IGNITION ON <ON>
mode, the system searches for a nearby
registered device.
zThe system will connect with the registered
device that was last connected, if it is
nearby.
■CONNECTING MANUALLY
1Press the “MENU” button on the
Remote Touch and select “Setup”.
2Select “Bluetooth*”.
3Follow the steps in “CONNECTING A
Bluetooth
® DEVICE” from “STEP 1”.
(→P.60)
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
■RECONNECTING THE Bluetooth®
PHONE
zIf a Bluetooth® phone is disconnected on
purpose, such as turning it off, this does not
happen. Reconnect the Bluetooth
® phone
manually.
To turn auto connection mode on, set
“Bluetooth* power” to on. (→P.65)
Leave the Bluetooth
® device in a loca-
tion where the connection can be estab-
lished.
When the auto connection has failed or
“Bluetooth* power” is turned off, it is
necessary to connect Bluetooth
® man-
ually.
If a Bluetooth® phone is disconnected
due to poor reception from the
Bluetooth
® network when the engine
<power> switch is in ACCESSORY or
IGNITION ON <ON> mode, the sys-
tem automatically reconnects the
Bluetooth
® phone.
IS_Navi_EE_53C71E.book 61 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

62
2. NETWORK SETTINGS
IS300h/250_Navi_EE
1Select the desired device to be edited.
2Select “Device info”.
3Confirm and change the Bluetooth®
device information.
EDITING THE Bluetooth®
DEVICE INFORMATION
The Bluetooth
® device’s information
can be displayed on the screen. The dis-
played information can be edited.
No.Information
The name of the Bluetooth® device.
Can be changed to a desired name.
(→P.63)
Device address is unique to the de-
vice and cannot be changed.
The telephone number of the
Bluetooth® phone.
Compatibility profile of the
Bluetooth® device.
Select to set the Bluetooth® audio
player connection method. (→P.63)
Select to reset all setup items.
IS_Navi_EE_53C71E.book 62 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

63
2. NETWORK SETTINGS
IS300h/250_Navi_EE
BASIC FUNCTION
2
■CHANGING A DEVICE NAME
1Select “Device name”.
2Enter the name and select “OK”.
■SETTING AUDIO PLAYER CON-
NECTION METHOD
1Select “Connect audio player from”.
2Select the desired connection method.
“Vehicle”: Select to connect the audio sys-
tem to the audio player.
“Device”: Select to connect the audio play-
er to the audio system.
zDepending on the audio player, the “Vehi-
cle” or “Device” connection method may
be best. As such, refer to the manual that
comes with the audio player.
zTo reset the connection method, select
“Defaults”.
INFORMATION
●
If 2 Bluetooth® devices have been regis-
tered with the same device name, the
devices can be distinguished referring to
the device’s address.
●Depending on the type of telephone,
some information may not be displayed.
INFORMATION
●
Even if the device name is changed, the
name registered in your Bluetooth®
device does not change.
IS_Navi_EE_53C71E.book 63 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

64
2. NETWORK SETTINGS
IS300h/250_Navi_EE
1Display the “Bluetooth*” screen.
(→P.56)
2Select “Detailed Bluetooth* settings”.
3Select the desired item to be set.
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
“Detailed Bluetooth* settings”
SCREEN
The Bluetooth® settings can be con-
firmed and changed.
No.InformationPage
Select to set Bluetooth®
connection on/off. 65
Displays system name. Can
be changed to a desired
name.65
PIN code used when the
Bluetooth® device was reg-
istered. Can be changed to
a desired code.65
Device address is unique to
the device and cannot be
changed.
Select to set the telephone
connection status display
on/off.
Select to set the connection
status display of the audio
player on/off.
Compatibility profile of the
system. 
Select to reset all setup
items.
IS_Navi_EE_53C71E.book 64 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

65
2. NETWORK SETTINGS
IS300h/250_Navi_EE
BASIC FUNCTION
21Select “Bluetooth* power”.
When “Bluetooth* power” is on:
The Bluetooth
® device is automatically
connected when the engine <power> switch
is in ACCESSORY or IGNITION ON
<ON> mode.
When “Bluetooth* power” is off:
The Bluetooth
® device is disconnected,
and the system will not connect to it next
time.
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
1Select “System name”.
2Enter a name and select “OK”.
1Select “PIN code”.
2Enter a PIN code and select “OK”.
CHANGING “Bluetooth*
power”
INFORMATION
●
While driving, the auto connection state
can be changed from off to on, but can-
not be changed from on to off.
EDITING THE SYSTEM NAME
EDITING THE PIN CODE
IS_Navi_EE_53C71E.book 65 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

66
2. NETWORK SETTINGS
IS300h/250_Navi_EE
3. CONNECTING TO INTERNET VIA Bluetooth® DEVICE*1
1Press the “MENU” button on the
Remote Touch.
2Select “Setup”.
3Select “Bluetooth*2”.
4Select “Communication settings”.
5Select “Yes”.
zA portal account is an account that is
obtained from the website Lexus prepares
for its customers.
*2: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
SETTING INTERNET
CONNECTION
To use the internet via Bluetooth® de-
vice, it is necessary to register a
Bluetooth
® device with the system.
Once the device has been registered, it
is possible to use the internet via
Bluetooth
® device.
For details about registering a
Bluetooth
® device: →P.58
*1: With navigation function
IS_Navi_EE_53C71E.book 66 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

92
IS300h/250_Navi_EE
1. BASIC OPERATION
1. QUICK REFERENCE
MAP SCREEN
To display this screen, press the “MENU” button on the Remote Touch, then select
“Nav”, and select if the navigation menu screen is displayed.
No.NameFunctionPage
2D north up, 2D
heading up or 3D
heading up sym-
bolIndicates whether the map orientation is set to
north-up or heading-up. In 3D map, only a head-
ing-up view is available.98
“GPS” mark
(Global Position-
ing System)Shows that the vehicle is receiving signals from
the GPS184
Status bar
Displays the condition of Wi-Fi® and Bluetooth®
connections, the level of reception and the
amount of battery charge left for a cellular phone.18
IS_Navi_EE_53C71E.book 92 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

109
1. BASIC OPERATION
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
4. TRAFFIC AND PARKING INFORMATION
*: Can only be used when receiving RDS-TMC
or TPEG (Transport Protocol Experts Group)
information. Depending on the country or ar-
ea, receiving RDS-TMC and TPEG informa-
tion may not be possible.
1Press the “MENU” button on the
Remote Touch.
2Select “Info”.
Traffic information, traffic prediction in-
formation and parking lot information
can be viewed.
zThe following 3 methods are available to
receive the above information:
• R D S -T M C * ( R a d i o D a t a S y s t e m -Tr a f f i c
Message Channel) using FM signals
• TPEG*-TEC (Traffic Event Compact),
TPEG*-TFP (Traffic Flow Prediction)
and TPEG*-PKI (Live Parking Informa-
tion) using DAB
• TPEG*-TEC, TPEG*-TEP and TPEG*-
PKI via the internet by using Wi-Fi
® or a
cellular phone
For detailed information about connec-
tion methods for a Wi-Fi® device or cel-
lular phone: →P.50, 69
zReceiving information using a cellular
phone
• In order to use this service, a
Bluetooth
® DUN/PAN compatible cel-
lular phone with sufficient network cov-
erage and a SIM card with a contract
that allows access to the internet are
required.
• When using this service, depending on
your telephone subscription, some
related fees might apply.
• When a cellular phone is used in a
roaming situation (when outside the
geographical coverage area of mobile
network provider) connection fees will
be more expensive.
DISPLAYING TRAFFIC AND
TRAFFIC PREDICTION
INFORMATION
IS_Navi_EE_53C71E.book 109 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

139
3. ROUTE GUIDANCE
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
■TRAFFIC INFORMATION
1Select “Traffic bar”.
2Check that the traffic information is dis-
played.
zWhen multiple destinations are set, traffic
information icons are displayed up to the
nearest destination area.
zWhen the distance to the destination is 65
miles (100 km) or more, traffic information
icons are displayed up to 65 miles (100
km) away from the current position.
When traffic information is received, the
traffic information bar is displayed.
The colour of the arrow indicates specif-
ic road conditions. Red indicates a
closed road, accident, etc. Orange indi-
cates a traffic jam. Blue indicates normal
traffic flow. (Note that roads that are not
covered by traffic information are also
shown in blue.)
No.Information
Icon that shows road hazard points.
Arrow that shows traffic congestion.
Displays estimated travel time delay
caused by road repairs, an accident,
etc.
IS_Navi_EE_53C71E.book 139 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

179
5. SETUP
IS300h/250_Navi_EE
NAVIGATION SYSTEM
31Display the “Traffic info settings” screen.
(→P.175)
2Select “RDS-TMC station”.
3Select “Manual”.
zA list of traffic stations and the country in
which it can be received is displayed.
4Select the desired traffic station.
“Search”: Select to search for traffic station
again.
1Display the “Traffic info settings” screen.
(→P.175)
2Select “Live update (Internet) (Wi-Fi*1
& Bluetooth*2)”.
*
1: Wi-Fi is a registered mark of the Wi-Fi
Alliance®.
*
2: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
RDS-TMC STATION
If “Manual” is selected, traffic stations
must be searched for before being
memorized.SETTING TPEG TRAFFIC
INFORMATION UPDATE
FREQUENCY
TPEG traffic information can be re-
ceived via Wi-Fi
® or a Bluetooth® de-
vice. This information can be set to
update automatically or manually.
IS_Navi_EE_53C71E.book 179 ページ ２０１４年５月２９日　木曜日　午前１１時２２分