ECO mode lexus LC500 2018 Workshop Manual

289
5
-$@-$I@0.@0.&@ &&

5-3. Using the air conditioning system
Interior features
Adjust the seat ventilator fan speed
level
The seat ventilator can be adjusted in 3 lev-
els.
When the seat ventilator is operated, the
fan speed level is displayed on the screen.
Adjust the seat heater temperature
level
The seat heater can be adjusted in 3 levels.
When the seat heater is operated, the tem-
perature level is displayed on the screen.
Adjust the heated steering wheel
temperature level
The heated steering wheel can be adjusted
in 2 levels.
When the heated steering wheel is oper-
ated, the temperature level is displayed on
the screen.
Automatic mode on/off indicators
When the automatic mode is on, the indi-
cator illuminates on the screen.
Sub function menu
When the sub function button on the
Remote Touch is pressed, the following
functions can be set to automatic mode.
: Left-hand side seat heater/seat
ventilator
: Heated steering wheel
: Right-hand side seat heater/seat
ventilator
■Side display
Display the air conditioning control
screen ( P.283)
Adjust the seat heater temperature
level
Each time the switch is selected, the tem-
perature level and level indicator (orange)
change as follows:
AUTO  Hi  Mid  Lo  Off
Adjust the seat ventilator fan speed
level
Each time the switch is selected, the fan
speed level and level indicator (blue)
change as follows:
AUTO  Hi  Mid  Lo  Off
Adjust the heated steering wheel
temperature level
Each time the switch is selected, the tem-
perature level and level indicator change
as follows:
AUTO  Hi  Lo  Off
■The heated steering wheel, seat heaters and seat ventilators can be used when
The engine switch <p ower switch> is in IGNITION ON mode <ON mode>.
■Air conditioning system-linked control mode
When the seat ventilator fan speed level is Hi, the seat ventilator fan speed becomes
A
B
C
D
E
A
B
C
D

299
5
-$@-$I@0.@0.&@ &&

5-6. Using the other interior features
Interior features
*: If equipped
Microphone
“SOS” button
Indicator lights
■Automatic Collision Notification
If any airbag deploys, the system is
designed to automatically call the Pub-
lic Safety Answering Point (PSAP)*.
The responding agent receives the
vehicle’s location and attempts to
speak with the vehicle occupants to
assess the level of emergency. If the
occupants are unable to communicate,
the agent automatically treats the call
as an emergency, contacts the nearest
emergency services provider to
describe the situation, and requests
that assistance be sent to the location.
*: In some cases, the call cannot be made.
( P.300)
■Emergency Assistance Button
(“SOS”)
In the event of an emergency, push the
“SOS” button to reach the Public
Safety Answering Point (PSAP). The
answering agent will determine your
vehicle’s location, assess the emer-
gency, and dispatch the necessary
assistance required.
If you accidentally press the “SOS” button,
tell the agent that you are not experiencing
an emergency.
When the engine switch <power
switch> is turned IGNITION ON
mode <ON mode>, the red indicator
light will illuminate for 10 seconds and
then the green indicator light will illumi-
nate for 2 seconds, indicating that the
system is enabled. The indicator lights
indicate the following:
 If the green indicator light illumi-
nates and stays on, the system is
ERA-GLONASS*
ERA-GLONASS is a telematics
service that uses Global Naviga-
tion Satellite System (GLONASS)
data and embedded cellular tech-
nology to enable the following
emergency calls to be made: Auto-
matic emergency calls (Automatic
Collision Notification) and manual
emergency calls (by pressing the
“SOS” button). This service is
required by Eurasian Customs
Union Regulations.
System components
Emergency Notification Ser-
vices
A
B
C
Indicator lights

300
-$@-$I@0.@0.&@ &&

5-6. Using the other interior features
enabled.
 If the green indicator light flashes, an
emergency call is being made
(either automatically or manually).
 If no indicator lights illuminate, the
system is not enabled.
 If the red indicator light illuminates
any time other than immediately
after the engine switch <power
switch> is turned IGNITION ON
mode <ON mode>, the system may
be malfunctioning or the backup
battery may be depleted. Contact
any authorized Lexus retailer or
Lexus authorized repairer, or any
reliable repairer.
The service life of the backup battery is 3
years or more.
WARNING
■When the Emergency Call may not be made
●Any of the followings may occur. In such cases, report to the Public Safety
Answering Point (PSAP) by other means such as nearby public phones.
• It may sometimes be difficult to con- nect to the Public Safety Answering Point (PSAP) even in the reception
area of the cellular phone due to the reception level, or if the line is busy.In such cases, you may not be able to
connect to the Public Safety Answer- ing Point (PSAP) and thus will not be able to make emergency calls and
report to the emergency departments even though the system tries to con-nect to the Public Safety Answering
Point (PSAP).
• When the vehicle is out of the cellular
phone service area, the Emergency Call cannot be made.
• When any related equipment (such as the “SOS” button panel, indicator lights, microphone, speaker, DCM,
antenna, or any wires connecting the equipment.) has an abnormality, is damaged or broken, the Emergency
Call cannot be made.
• During the Emergency Call, the sys-
tem makes repeated attempts to con- nect to the Public Safety Answering Point (PSAP). However, if it cannot
connect to the Public Safety Answer- ing Point (PSAP) due to poor radio wave reception, the system may not be
able to connect to the cellular network and the call may finish without con-necting. The red indicator light will
blink for approximately 30 seconds to indicate this disconnection.
• This device may not function if a shock is applied to it.

305
6
-$@-$I@0.@0.&@ &&

6-1. Maintenance and care
Maintenance and care
■Notes for a smart entry & start system
If the door handle becomes wet while the
electronic key is within the effective range, the door may lock and unlock repeatedly. In that case, follow the following correction
procedures to wash the vehicle:
●Place the key in a position 2 m (6 ft.) or
more separate from the vehicle while the vehicle is being washed. (Take care to ensure that the key is not stolen.)
●Set the electronic key to battery-saving mode to disable the smart entry & start
system. ( P.124)
■Aluminum wheels
●Remove any dirt immediately by using a
neutral detergent.
●Wash detergent off with water immedi-
ately after use.
●To protect the paint from damage, make
sure to observe the following precau- tions.• Do not use acidic, alkaline or abrasive
detergent • Do not use hard brushes• Do not use detergent on the wheels when
they are hot, such as after driving or park- ing in hot weather
■Brake caliper coating
●When using detergent, use neutral deter-gent. Do not use hard brushes or abra-
sive cleaners, as they will damage the coating.
●Do not use detergent on the brake cali-pers when they are hot.
●Wash detergent off immediately after use.
■Bumpers
Do not scrub with abrasive cleaners.
■Front side windows water-repellent coating
●The following precautions can extend the effectiveness of the water-repellent coat-ing.
• Remove any dirt, etc. from the front side windows regularly.• Do not allow dirt and dust to accumulate
on the windows for a long period. Clean the windows with a soft, damp cloth as soon as possible.
• Do not use wax or glass cleaners that contain abrasives when cleaning the win-dows.
• Do not use any metallic objects to remove condensation build up.
●When the water-repellent performance has become insufficient, the coating can be repaired. Contact any authorized
Lexus retailer or Lexus authorized repairer, or any reliable repairer.
WARNING
■When washing the vehicle
Do not apply water to the inside of the
engine compartment. Doing so may cause the electrical components etc. to catch fire.
■When cleaning the windshield
Set the wiper switch to off. If the wiper switch is in AUTO, the wipers
may operate unexpectedly in the follow- ing situations, and may result in hands being caught or other serious injuries
and cause damage to the wiper blades.
Off
AUTO
●When the upper part of the windshield where the raindrop sensor is located is
touched by hand
●When a wet rag or similar is held close to the raindrop sensor
●If something bumps against the wind-shield
A
B

315
6
-$@-$I@0.@0.&@ &&

6-3. Do-it-yourself maintenance
Maintenance and care
WARNING
The engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or become elec-
trically energized. To avoid death or seri- ous injury, observe the following precautions.
■When working on the engine com-
partment
●LC500h: Make sure that the “IGNI-
TION ON” on the multi-information display and the “READY” indicator are both off.
●Keep hands, clothing and tools away
from the moving fan and engine drive belt.
●LC500: Be careful not to touch the engine, radiator, exhaust manifold, etc.
right after driving as they may be hot. Oil and other fluids may also be hot.LC500h: Be careful not to touch the
engine, power control unit, radiator, exhaust manifold, etc. right after driv-ing as they may be hot. Oil and other
fluids may also be hot.
●Do not leave anything that may burn easily, such as paper and rags, in the engine compartment.
●Do not smoke, cause sparks or expose
an open flame to fuel. Fuel fumes are flammable.
●Take care because brake fluid can harm your hands or eyes and damage
painted surfaces. If fluid gets on your hands or in your eyes, flush the affected area with clean water imme-
diately. If you still experience discomfort, con-sult a doctor.
■When working near the electric cool-ing fan or radiator grille
Be sure the engine switch <power switch> is off.
With the engine switch <power switch> in IGNITION ON mode <ON mode>, the electric cooling fan may automatically
start to run if the air conditioning is on and/or the coolant temperature is high. ( P.323)
■Safety glasses
Wear safety glasses to prevent flying or falling material, fluid spray, etc. from get-
ting in your eyes.
NOTICE
■If you remove the air cleaner filter
Driving with the air cleaner filter
removed may cause excessive engine wear due to dirt in the air.
■If the fluid level is low or high
It is normal for the brake fluid level to go down slightly as the brake pads wear or when the fluid level in the accumulator is
high. If the reservoir needs frequent refilling, it may indicate a serious problem.

325
6
-$@-$I@0.@0.&@ &&

6-3. Do-it-yourself maintenance
Maintenance and care
The 12-volt battery is located in the
trunk.
■Before recharging
When recharging, the 12-volt battery pro- duces hydrogen gas which is flammable and explosive. Therefore, observe the fol-
lowing precautions before recharging:
●If recharging with the 12-volt battery
installed on the vehicle, be sure to discon- nect the ground cable.
●Make sure the power switch on the char-ger is off when connecting and discon-necting the charger cables to the 12-volt
battery.
■After recharging/reconnecting the 12- volt battery
●Unlocking the doors using the smart entry & start system may not be possible immediately after reconnecting the 12-
volt battery. If this happens, use the wire- less remote control or the mechanical key to lock/unlock the doors.
●Start the engine <hybrid system> with the engine switch <power switch> in ACCES-
SORY mode. The engine <hybrid sys- tem> may not start with the engine switch <power switch> turned off. However, the
engine <hybrid system> will operate nor- mally from the second attempt.
●The engine switch <power switch> mode
is recorded by the vehicle. If the 12-volt battery is reconnected, the vehicle will return the engine switch <power switch>
mode to the status it was in before the 12- volt battery was disc onnected. Make sure to turn off the engine switch <power
switch> before disconnect the 12-volt bat- tery. Take extra care when connecting the 12-volt battery if the engine switch
<power switch> mode prior to discharge is unknown.
If the engine <hybrid system> will not start even after multiple attempts at all methods above, contact any authorized Lexus
retailer or Lexus authorized repairer, or any reliable repairer.
12-volt battery
Location
WARNING
■Chemicals in the 12-volt battery
The 12-volt battery contains poisonous
and corrosive sulfuric acid and may pro- duce hydrogen gas which is flammable and explosive. To reduce the risk of death
or serious injury, take the following pre- cautions while working on or near the 12-volt battery:
●Do not cause sparks by touching the
12-volt battery terminals with tools.
●Do not smoke or light a match near the 12-volt battery.
●Avoid contact with eyes, skin and clothes.
●Never inhale or swallow electrolyte.
●Wear protective safety glasses when
working near the 12-volt battery.
●Keep children away from the 12-volt battery.
■Where to safely charge the 12-volt battery
Always charge the 12-volt battery in an open area. Do not charge the 12-volt bat-
tery in a garage or closed room where there is insufficient ventilation.

328
-$@-$I@0.@0.&@ &&

6-3. Do-it-yourself maintenance
■When to replace your vehicle’s tires
Tires should be replaced if:
●The treadwear indicators are showing on a tire.
●You have tire damage such as cuts, splits, cracks deep enough to expose the fabric,
and bulges indicating internal damage
●A tire goes flat repeatedly or cannot be
properly repaired due to the size or loca- tion of a cut or other damage
If you are not sure, consult any authorized Lexus retailer or Lexus authorized repairer, or any reliable repairer.
■Tire life
Any tire over 6 years old must be checked by a qualified technician even if it has sel-
dom or never been used or damage is not obvious.
■Low profile tires (21-inch tires)
Generally, low profile tires will wear more rapidly and tire grip performance will be reduced on snowy and/or icy roads when
compared to standard tires. Be sure to use snow tires on snowy and/or icy roads and drive carefully at a speed appropriate for
road and weather conditions.
■If the tread on snow tires wears down below 4 mm (0.16 in.)
The effectiveness of the tires as snow tires is lost.
Rotate the tires in the order shown.
WARNING
■When inspecting or replacing tires
Observe the following precautions to
prevent accidents. Failure to do so may cause damage to parts of the drivetrain as well as danger-
ous handling characteristics, which may lead to an accident resulting in death or serious injury.
●Do not mix tires of different makes,
models or tread patterns. Also, do not mix tires of remarkably different treadwear.
●Do not use tire sizes other than those recommended by Lexus.
●Do not mix differently constructed
tires (radial, bias-belted or bias-ply tires).
●Do not mix summer, all season and snow tires.
●Do not use tires that have been used
on another vehicle. Do not use tires if you do not know how they were used previously.
NOTICE
■Driving on rough roads
Take particular care when driving on roads with loose surfaces or potholes.
These conditions may cause losses in tire inflation pressure, reducing the cushion-ing ability of the tires. In addition, driving
on rough roads may cause damage to the tires themselves, as well as the vehi-cle’s wheels and body.
■Low profile tires (21-inch tires)
Low profile tires may cause greater dam- age than usual to the tire wheel when
sustaining impact from the road surface. Therefore, pay attention to the following:
●Be sure to use proper tire inflation pressure. If tires are under-inflated,
they may be damaged more severely.
●Avoid potholes, uneven pavement, curbs and other road hazards. Failure to do so may lead to severe tire and
wheel damage.
■If tire inflation pressure of each tire becomes low while driving
Do not continue driving, or your tires and/or wheels may be ruined.
Tire rotation

329
6
-$@-$I@0.@0.&@ &&

6-3. Do-it-yourself maintenance
Maintenance and care
Vehicles with front and rear tires of
the same size
Vehicles with front and rear tires of
differing sizes
To equalize tire wear and help extend tire
life, Lexus recommends that tire rotation is
carried out approximately every 10000
km (6000 miles).
Do not fail to initialize the tire pressure
warning system after tire rotation.
■When rotating the tires
Make sure that the engine switch <power switch> is off. If the tires are rotated while
the engine switch <power switch> is in IGNITION ON mode <ON mode>, the tire position information will not be updated.
If this accidentally occurs, either turn the engine switch <power switch> to off and then to IGNITION ON mode <ON mode>,
or initialize the tire pr essure warning system after checking that the tire pressure is prop-erly adjusted.
When run-flat tires are installed, the
vehicle can be driven for a maximum of
160 km (100 miles) at a speed below
80 km/h (50 mph) after any tire goes
flat. (However, the vehicle speed may
not increase to near 80 km/h [50
mph] depending on weather or driving
conditions.)
A run-flat tire has a mark on
the side wall.
Make sure to replace the flat tire before the
vehicle has been driven for near 160 km
(100 miles). Also, do not use a repaired
tire.
■Run-flat tires
●The run-flat tires are for only this vehicle. Do not use the tires on other vehicles.
●Do not mix run-flat tires and normal tires.
●If non-genuine Lexus wheels are used, it
may be impossible to sufficiently demon- strate the performanc e of run-flat tires.
Your vehicle is equipped with a tire
pressure warning system that uses tire
pressure warning valves and transmit-
ters to detect low tire inflation pressure
before serious problems arise.
 If the tire pressure drops below a
predetermined level, the driver is
warned by a screen display and a
warning light. ( P.374)
 The tire pressure detected by the
tire pressure warning system can be
displayed on the multi-information
Run-flat tires
Tire pressure warning system

335
6
-$@-$I@0.@0.&@ &&

6-3. Do-it-yourself maintenance
Maintenance and care
When replacing tires or wheels, tire
pressure warning valves and transmit-
ters must also be installed.
When new tire pressure warning
valves and transmitters are installed,
new ID codes must be registered in the
tire pressure warning computer and
the tire pressure warning system must
be initialized. ( P.337)
■When replacing the tires and wheels
If the ID code of the tire pressure warning valve and transmitter is not registered, the tire pressure warning system will not work
properly. After driving for about 10 minutes, the tire pressure warning light blinks for 1 minute and stays on to indicate a system
malfunction.
■The tire pressure warning system
must be initialized in the following
circumstances:
 When rotating the tires.
 When the tire inflation pressure is
changed when changing traveling
speed.
 When the tire inflation pressure is
changed such as when changing tire
size. (When there are multiple spec-
ified pressures)
 After registering the ID codes.
( P.337)
When the tire pressure warning system
is initialized, the current tire inflation
pressure is set as the benchmark pres-
sure.
■How to initialize the tire pressure
warning system
1 Park the vehicle in a safe place and
turn the engine switch <power
switch> off.
Initialization cannot be performed while the vehicle is moving.
2 Adjust the tire inflation pressure to
the specified cold tire inflation pres-
sure level.
Make sure to adjust the tire pressure to the specified cold tire infl ation pressure level. The tire pressure warning system will oper-
ate based on this pressure level.
3 Turn the engine switch <power
switch> to IGNITION ON mode
<ON mode>.
Installing tire pressure warning
valves and tr ansmitters
NOTICE
■Repairing or replacing tires, wheels, tire pressure warning valves, trans-
mitters and tire valve caps
●When removing or fitting the wheels,
tires or the tire pressure warning valves and transmitters, contact any
authorized Lexus retailer or Lexus authorized repairer, or any reliable repairer as the tire pressure warning
valves and transmitters may be dam- aged if not handled correctly.
●Make sure to install the tire valve caps. If the tire valve caps are not installed,
water could enter the tire pressure warning valves and the tire pressure warning valves could be bound.
●When replacing tire valve caps, do not
use tire valve caps other than those specified. The cap may become stuck.
Initializing the tire pressure
warning system

336
-$@-$I@0.@0.&@ &&

6-3. Do-it-yourself maintenance
4Press or of the meter con-
trol switches and select .
5 Press or of the meter con-
trol switches and select “Vehicle
Settings”, and then press “OK”.
6 Press or of the meter con-
trol switches and select “TPWS
SET”, and then press “OK”.
7 Press or of the meter con-
trol switches and select “Set tire
pressure”, and then press and hold
“OK” until the tire pressure warning
light starts blinking.
A message is displayed on the multi-infor- mation display. Also, “--” is displayed for inflation pressure of each tire on the multi-
information display while the tire pressure warning system determines the position.
8 Drive the vehicle at approximately
40 km/h (25mph) or more for
approximately 10 to 30 minutes.
When initialization is complete, the infla- tion pressure of each tire will be displayed on the multi-information display.
Depending on the vehicle and driving con- ditions, initialization may take up to
approximately 1 hour to complete.
■The initialization operation
●Make sure to carry out initialization after
adjusting the tire inflation pressure. Also, make sure the tires are cold before carrying out initialization or tire inflation
pressure adjustment.
●If you have accidentally turned the engine
switch <power switch> off during initial- ization, it is not ne cessary to manually restart the initializatio n again, as initializa-
tion will restart automatically the next time the engine switch <power switch> is turned to IGNITION ON mode <ON
mode>.
●If you accidentally perform initialization
when initialization is not necessary, adjust the tire inflation pressure to the specified level when the tires are cold, and conduct
initialization again.
●While the position of each tire is being
determined and the inflation pressures are not being displayed on the multi-information display, if the inflation pres-
sure of a tire drops, the tire pressure warning light will come on.
■When initialization of the tire pressure warning system has failed
Initialization may take longer to complete if
the vehicle is driven on an unpaved road. When performing initialization, drive on a paved road if possible. Depending on the
driving environment an d condition of the tires, initialization will be completed in approximately 10 to 30 minutes. If initializa-
tion is not complete after driving approxi- mately 10 to 30 minutes, continue driving for a while. If the inflation of each tire is not
displayed after driving for approximately 1 hour, perform the following procedure.
●Park the vehicle in a safe place for approximately 20 minutes. Then drive straight (with occasional left and right
turns) at approximately 40 km/h (25 mph) or more for approximately 10 to 30 minutes.
However, in the following situations, the tire
inflation pressure will not be recorded and
the system will not operate properly. Per-
form initialization again.
●When performing init ialization, the tire