light lexus LC500 2018 Workshop Manual

146
-$@-$I@0.@0.&@ &&

3-4. Adjusting the steering wheel and mirrors
The height of the rear view mirror can
be adjusted to suit your driving pos-
ture.
Adjust the height of the rear view mir-
ror by moving it up and down.
Responding to the level of brightness
of the headlights of vehicles behind, the
reflected light is automatically
reduced.
Turn the automatic anti-glare function
mode on/off
When the automatic anti-glare function is
in ON mode, the indicator illuminates.
The function will set to ON mode each
time the engine switch <power switch> is
turned to IGNITION ON mode <ON
mode>.
Pressing the button turns the function to
OFF mode. (The indicator also turns
off.)
■To prevent sensor error
To ensure that the sensors operate properly, do not touch or cover them.
Inside rear view mirror
The rear view mirror’s position can
be adjusted to enable sufficient
confirmation of the rear view.
Adjusting the height of rear view
mirror
WARNING
■Caution while driving
Do not adjust the position of the mirror while driving.
Doing so may lead to mishandling of the vehicle and cause an accident, resulting in death or serious injury.
Anti-glare function
A
A

147
3
-$@-$I@0.@0.&@ &&

3-4. Adjusting the steering wheel and mirrors
Before driving
1To select a mirror to adjust, press
the switch.
The indicator comes on.
Left
Right
Pressing the same switch again will put the
switch in neutral.
2 To adjust the mirror, press the
switch.
Up
Right
Down
Left
■Mirror angle can be adjusted when
The engine switch <p ower switch> is in ACCESSORY or IGNITION ON mode <ON mode>.
■Defogging the mirrors
The outside rear view mirrors can be cleared using the mirror defoggers. Turn on
the rear window defogger to turn on the outside rear view mirror defoggers. ( P.281)
■Auto anti-glare function
When the anti-glare inside rear view mirror is set to automatic mode, the outside rear
view mirrors will activate in conjunction with the anti-glare inside rear view mirror to reduce reflected light. ( P.146)
■Automatic adjustment of the mirror
angle
A desired mirror face angle can be entered
to memory and recalled automatically by the driving position memory. ( P.140)
Outside rear view mirrors
The rear view mirror’s position can
be adjusted to enable sufficient
confirmation of the rear view.
WARNING
■Important points while driving
Observe the following precautions while
driving. Failure to do so may result in loss of con-trol of the vehicle and cause an accident,
resulting in death or serious injury.
●Do not adjust the mirrors while driving.
●Do not drive with the mirrors folded.
●Both the driver and passenger side mirrors must be extended and prop-erly adjusted before driving.
Adjustment procedure
A
B
A
B
C
D

150
-$@-$I@0.@0.&@ &&

3-5. Opening, closing the windows
3-5.Opening, closing the windows
The power windows can be opened
and closed by one-touch operation of
the switches.
1 Closing
2 One-touch closing*
3Opening
4 One-touch opening*
*: To stop the window partway, operate the
switch in the opposite direction.
■The power windows can be operated
when
The engine switch <p ower switch> is in
IGNITION ON mode <ON mode>.
■Operating the power windows after turning the engine <hybrid system> off
The power windows can be operated for approximately 45 seconds after the engine switch <power switch> is turned to ACCES-
SORY mode or turned off. They cannot, however, be operated once either door is opened.
■Jam protection function
If an object becomes jammed between the window and the window frame while the
window is closing, window movement is
stopped and the window is opened slightly.
■Catch protection function
If an object becomes caught between the
door and window while the window is open- ing, window movement is stopped.
■When the window cannot be opened or closed
When the jam protection function or catch protection function operates unusually and
the door window cannot be opened or closed, perform the following operations with the power window switch of that door.
●Stop the vehicle. With the engine switch <power switch> in IGNITION ON mode
<ON mode>, within 4 seconds of the jam protection function or catch protection function activating, continuously operate
the power window switch in the one- touch closing direction or one-touch opening direction so that the door win-
dow can be opened and closed.
●If the door window cannot be opened
and closed even when performing the above operations, perform the following procedure for function initialization.
1 Close both side doors.
2 Turn the engine switch <power switch> to IGNITION ON mode <ON mode>.
3 Pull and hold the power window switch in the one-touch cl osing direction and
completely close the door window.
4 Release the power window switch for a moment, resume pulling the switch in the one-touch closing direction, and
hold it there for approximately 6 sec- onds or more.
5 Press and hold the power window switch in the one-touch opening direc-
tion. After the door window is com- pletely opened, continue holding the switch for an additional 1 second or
more.
6 Release the power window switch for a moment, resume pushing the switch in the one-touch opening direction, and
hold it there for approximately 4 sec- onds or more.
7 Pull and hold the power window switch in the one-touch closing direction
Power windows
Opening and closing the power
windows

4
153
-$@-$I@0.@0.&@ &&

4
Driving
Driving
4-1. Before driving
Driving the vehicle..................... 154
Cargo and luggage .................... 161
Trailer towing ............................... 162
4-2. Driving procedures
Engine (ignition) switch (LC500)
......................................................... 163
Power (ignition) switch (LC500h)
......................................................... 167
EV drive mode (LC500h)...... 171
Automatic transmission (LC500)
......................................................... 173
Hybrid transmission (LC500h)
......................................................... 179
Turn signal lever ......................... 186
Parking brake .............................. 187
Brake Hold.................................... 189
4-3. Operating the lights and wipers
Headlight switch .......................... 191
Automatic High Beam ............. 193
Fog light switch ........................... 196
Windshield wipers and washer
......................................................... 196
4-4. Refueling
Opening the fuel tank cap...... 201
4-5. Using the driving support sys-
tems
Lexus Safety System+ ............. 203
PCS (Pre-Collision System) . 210
LKA (Lane-Keeping Assist) .. 218
RSA (Road Sign Assist).......... 226
Dynamic radar cruise control with
full-speed range ...................... 229
Cruise control ............................ 239
Driving mode select switch ... 242
Lexus parking assist-sensor .. 243
BSM (Blind Spot Monitor) .... 248
Active rear wing ........................ 259
Driving assist systems .............. 262
4-6. Driving tips
Hybrid vehicle driving tips
(LC500h).................................. 267
Winter driving tips .................... 269

156
-$@-$I@0.@0.&@ &&

4-1. Before driving
WARNING
■When starting the vehicle
LC500: Always keep your foot on the
brake pedal while stopped with the engine running. This prevents the vehicle from creeping.
LC500h: Always keep your foot on the brake pedal while stopped with the
“READY” indicator is illuminated. This prevents the vehicle from creeping.
■When driving the vehicle
●Do not drive if you are unfamiliar with the location of the brake and accelera-tor pedals to avoid depressing the
wrong pedal.
• Accidentally depressing the accelera-
tor pedal instead of the brake pedal will result in sudden acceleration that may lead to an accident.
• When backing up, you may twist your body around, leading to a difficulty in
operating the pedals. Make sure to operate the pedals properly.
• Make sure to keep a correct driving posture even when moving the vehicle only slightly. This allows you to depress
the brake and accelerator pedals properly.
• Depress the brake pedal using your right foot. Depressing the brake pedal using your left foot may delay
response in an emergency, resulting in an accident.
●LC500h: The driver should pay extra attention to pedestrians when the vehi-
cle is powered only by the electric motor (traction motor). As there is no engine noise, the pedestrians may mis-
judge the vehicle’s movement.
●Do not drive the vehicle over or stop the vehicle near flammable materials.The exhaust system and exhaust gases
can be extremely hot. These hot parts may cause a fire if there is any flamma-ble material nearby.
●During normal driving, do not turn off the engine <hybrid system>. Turning
the engine <hybrid system> off while driving will not cause loss of steering or braking control, however, power
assist to the steering will be lost. This will make it more difficult to steer smoothly, so you should pull over and
stop the vehicle as soon as it is safe to do so. In the event of an emergency, such as if
it becomes impossible to stop the vehi- cle in the normal way: P.360
●Use engine braking (downshift) to maintain a safe speed when driving
down a steep hill. Using the brakes continuously may cause the brakes to overheat and lose
effectiveness. ( P.173, 179)
●Do not adjust the positions of the steering wheel, the seat, or the inside or outside rear view mirrors while driv-
ing. Doing so may result in a loss of vehicle control.
●Always check that all passengers’ arms, heads or other parts of their body are not outside the vehicle.
■When driving on slippery road sur-
faces
●Sudden braking, acceleration and
steering may cause tire slippage and reduce your ability to control the vehi-cle.
●Sudden acceleration, engine braking
due to shifting, or changes in engine speed could cause the vehicle to skid, resulting in an accident.
●After driving through a puddle, lightly
depress the brake pedal to make sure that the brakes are functioning prop-erly. Wet brake pads may prevent the
brakes from functioning properly. If the brakes on only one side are wet and not functioning properly, steering con-
trol may be affected.

158
-$@-$I@0.@0.&@ &&

4-1. Before driving
WARNING
■When the vehicle is stopped
●LC500: Do not race the engine.
If the shift position is any position other than P or N, the vehicle may acceler-ate suddenly and unexpectedly, caus-
ing an accident. LC500h: Do not depress the acceler-ator pedal unnecessarily.
If the shift position is any position other than P or N, the vehicle may acceler-ate suddenly and unexpectedly, caus-
ing an accident.
●LC500: In order to prevent accidents due to the vehicle rolling away, always keep depressing the brake pedal while
the engine is running, and apply the parking brake as necessary.LC500h: In order to prevent acci-
dents due to the vehicle rolling away, always keep depressing the brake pedal while stopped with the
“READY” indicator is illuminated, and apply the parking brake as necessary.
●If the vehicle is stopped on an incline, in order to prevent accidents caused
by the vehicle rolling forward or back- ward, always depress the brake pedal and securely apply the parking brake
as needed.
●Avoid revving or racing the engine. Running the engine at high speed while the vehicle is stopped may cause
the exhaust system to overheat, which could result in a fire if combustible material is nearby.
■When the vehicle is parked
●Do not leave glasses, cigarette lighters, spray cans, or soft drink cans in the vehicle when it is in the sun.
Doing so may result in the following:
• Gas may leak from a cigarette lighter
or spray can, and may lead to a fire.
• The temperature inside the vehicle
may cause the plastic lenses and plas- tic material of glasses to deform or crack.
• Soft drink cans may fracture, causing the contents to spray over the interior
of the vehicle, and may also cause a short circuit in the vehicle’s electrical components.
●Do not leave cigarette lighters in the
vehicle. If a cigarette lighter is in a place such as the glove box or on the floor, it may be lit accidentally when
luggage is loaded or the seat is adjusted, causing a fire.
●Do not attach adhesive discs to the windshield or windows. Do not place
containers such as air fresheners on the instrument panel or dashboard.
Adhesive discs or containers may act as lenses, causing a fire in the vehicle.
●Do not leave a door or window open if the curved glass is coated with a met-
allized film such as a silver-colored one. Reflected sunlight may cause the glass to act as a lens, causing a fire.

165
4
-$@-$I@0.@0.&@ &&

4-2. Driving procedures
Driving
1Stop the vehicle completely.
2 If the parking brake is in manual
mode, set the parking brake.
( P.187)
3 Shift the shift position to P.
( P.175)
Check that the shift position indicator
shows P. ( P.175)
4Press the engine switch.
The engine will stop, and the meter display will be extinguished (the shift position indi-
cator will be extinguished a few seconds after the meter display).
5 Check that “ACCESSORY” or
“IGNITION ON” is not shown on
the meter.
■Automatic P position selection function
 P.176
Modes can be changed by pressing
the engine switch with the brake pedal
released. (The mode changes each
time the switch is pressed.)
NOTICE
■Symptoms indicating a malfunction with the engine switch
If the engine switch seems to be operat- ing somewhat differently than usual, such as the switch sticking slightly, there may
be a malfunction. Contact any autho- rized Lexus retailer or Lexus authorized repairer, or any reliable repairer immedi-
ately.
Stopping the engine
WARNING
■Stopping the engine in an emergency
●If you want to stop the engine in an
emergency while driving the vehicle, press and hold the engine switch for more than 2 seconds, or press it briefly
3 times or more in succession. ( P.360) However, do not touch the engine
switch while driving except in an emer- gency. Turning the engine off while driving will not cause loss of steering
or braking control, however, power assist to the steering will be lost. This will make it more difficult to steer
smoothly, so you should pull over and stop the vehicle as soon as it is safe to do so.
●If the engine switch is operated while the vehicle is running, a warning mes-
sage is shown on the multi-information display and a buzzer sounds.
●When restarting the engine after an emergency shutdown, press the engine switch.
Changing engine switch modes

167
4
-$@-$I@0.@0.&@ &&

4-2. Driving procedures
Driving
1Press the parking brake switch to
check that the parking brake is set.
( P.187)
Parking brake indicator will come on.
2Firmly depress the brake pedal.
and a message will be displayed on
the multi-information display.
If it is not displayed, the hybrid system can- not be started.
When the shift position is N, the hybrid sys- tem cannot start. Shift the shift position to P
when starting the hybrid system. ( P.182)
3Press the power switch shortly and
firmly.
When operating the power switch, one short, firm press is enough. It is not neces-
sary to press and hold the switch.
If the “READY” indicator turns on, the
hybrid system will operate normally.
Continue depressing the brake pedal until
the “READY” indicator is illuminated.
The hybrid system can be started from any
power switch mode.
4 Check that the “READY” indicator
is illuminated.
If the “READY” indicator changes from a flashing light to a solid light and the buzzer sounds, the hybrid system is starting nor-
mally. The vehicle will not move when the “READY” indicator is off.
The vehicle can move when the “READY” indicator is on even if the engine is stopped. (The gasoline engine starts or
stops automatically in accordance with the state of the vehicle.)
■Power switch illumination
According to the situation, the power switch illumination operates as follows.
●When a door is opened, or the power switch mode is changed from ACCES-SORY or ON mode to off, the power
switch illumination slowly blinks.
●When depressing the brake pedal with
carrying the electric key on your person, the power switch illumination rapidly blinks.
●When the power switch is in ACCES-SORY or ON mode, the power switch
illumination illuminates.
■If the hybrid system does not start
●The immobilizer system may not have
been deactivated. ( P.70) Contact any authorized Lexus retailer or Lexus authorized repairer, or any reliable
repairer.
●If a message related to start-up is shown
Power (ignition) switch
(LC500h)
Performing the following opera-
tions when carrying the electronic
key on your person starts the hybrid
system or changes power switch
modes.
Starting the hybrid system

169
4
-$@-$I@0.@0.&@ &&

4-2. Driving procedures
Driving
switch off, please wait a few seconds before restarting the hybrid system.
■Customization
If the smart entry & start system has been deactivated in a customized setting, refer to P.389.
1 Stop the vehicle completely.
2 If the parking brake is in manual
mode, set the parking brake.
( P.187)
3 Shift the shift position to P.
( P.182)
Check that the shift position indicator shows P. ( P.181)
4Press the power switch.
The hybrid system will stop, and the meter display will be extinguished (the shift posi-tion indicator will be extinguished a few
seconds after the meter display).
5 Check that “ACCESSORY” or
“IGNITION ON” is not shown on
the meter.
■Automatic P position selection function
 P.182
WARNING
■When starting the hybrid system
Always start the hybrid system while sit- ting in the driver’s seat. Do not depress the accelerator pedal while starting the
hybrid system under any circumstances. Doing so may cause an accident result-ing in death or serious injury.
■Caution while driving
If hybrid system failure occurs while the vehicle is moving, do not lock or open the
doors until the vehicle reaches a safe and complete stop. Activati on of the steering lock in this circumstance may lead to an
accident, resulting in death or serious injury.
NOTICE
■When starting the hybrid system
If the hybrid system becomes difficult to start, have your vehicle checked by any authorized Lexus retailer or Lexus
authorized repairer, or any reliable repairer immediately.
■Symptoms indicating a malfunction with the power switch
If the power switch seems to be operat- ing somewhat differently than usual, such
as the switch sticking slightly, there may be a malfunction. Contact any autho-rized Lexus retailer or Lexus authorized
repairer, or any reliable repairer immedi- ately.
Stopping the hybrid system
WARNING
■Stopping the hybrid system in an emergency
●If you want to stop the hybrid system in an emergency while driving the vehi-cle, press and hold the power switch
for more than 2 seconds, or press it briefly 3 times or more in succession. ( P.360)
However, do not touch the power switch while driving except in an emer- gency. Turning the hybrid system off
while driving will not cause loss of steering or braking control, however, power assist to the steering will be lost.
This will make it more difficult to steer smoothly, so you should pull over and stop the vehicle as soon as it is safe to
do so.
●If the power switch is operated while the vehicle is running, a warning mes-sage is shown on the multi-information
display and a buzzer sounds.

175
4
-$@-$I@0.@0.&@ &&

4-2. Driving procedures
Driving
Shift lever
Operate the shift lever gently and securely
in the direction of the arrow on the shift
position indicator.
To shift to N, slide the shift lever in the
direction of the arrow and hold it.
Release the shift lever after each shifting
operation to allow it to return to its regular
position ( ).
Shifting to M is only possible when the shift
position is in D.
When shifting from P to N, D or R, from N,
D or R to P, from D to R, or from R to D,
ensure that the brake pedal is being
depressed and the vehicle is stationary.
Shift position indicator
Meter display:
The current shift position is highlighted.
When any shift position other than D or M
is selected, the arrow toward M and M
position indicator are displayed in gray.
Shift lever display:
The current shift position is illuminated.
When selecting the sh ift position, make
sure that the shift position has been
changed to the desired position by check-
ing the shift position indicator provided on
the instrument cluster.
P position switch
■When shifting the shift position to P
Fully stop the vehicle and set the park-
ing brake, and then press the P position
switch.
When the shift position is changed to P, the
switch illuminates.
Check that the shift position indicator
shows P.
Shifting the shift lever
A
B
WARNING
■For the shift lever
●Do not remove the shift lever knob or use anything but a genuine Lexus shift lever knob. Also, do not hang anything
on the shift lever. Doing so could prevent the shift lever from returning to position, causing
unexpected accidents to occur when the vehicle is in motion.
●In order to prevent the shift position from accidentally being changed, do
not touch the shift lever when not using them.
P position switch
C