remote control LINCOLN MKC 2016 Quick Reference Guide

1110
ConvenienceLincoln Experiences
As you approach or leave your vehicle, key areas
of your vehicle automatically adjust, including the
following personalization features.
Welcome Lighting
As you approach your vehicle, select exterior lighting
illuminates. You can switch this feature on and off in
your information display. See the Information Display
chapter in your Owner’s Manual for details.
Auto-folding Exterior Mirrors*
Automatically folds the exterior mirrors toward the
glass when you place the transmission into park (P).
Auto-folding mirrors unfold and return to their original
position automatically after you unlock your vehicle,
and then open and close the driver’s door. You can fold the mirrors on demand by pressing the
door lock control located on the door. The control
will light and the mirrors will fold in toward the glass.
Press the control again to unfold the mirrors. The
control light will turn off.
Interior Lighting
Lights select interior lighting and ambient lighting
including the push button start as you enter your
vehicle. Once you start your vehicle, the information
display and the touchscreen also light.
Easy Entry
Automatically recalls your seat and power tilt and
telescoping steering wheel positions when you push
the keyless start ignition button.
Easy Exit
Moves the driver seat rearward up to 2 inches
(5 centimeters). Additionally, the power tilt and
telescoping steering wheel moves to the full up
position when the transmission is in park (P) and
you switch off the keyless start ignition. The driver
seat and steering column return to their previous
positions when you push the keyless start
ignition button.
Note: You must have your intelligent access
transmitter with you for these features to work.
Intelligent Access
Note:
Your intelligent access
transmitter must be within 3 feet
(1 meter) of the vehicle for intelligent
access to function properly.
To unlock and open the driver’s door,
pull a front exterior door handle.
To lock all of the doors, touch and
briefly hold the lock sensor area on
top of the door handle.
To open the liftgate, press the button
located in the top of the liftgate pull-
cup handle to unlatch the liftgate and
then pull on the outside handle.
Note: The transmitter also contains a
mechanical key blade that can be used
to unlock the driver door, if necessary.
Remote Start
Remote start allows you to start the
engine from outside your vehicle using
your transmitter. To start, press

and then press twice within three
seconds. Once inside, shift into drive
(D) and go. To switch the engine off
from outside the vehicle after using
your remote start, press
once.
An LED on the transmitter provides
status feedback of remote start or
stop commands:
Solid green: The remote start or
extension was successful.
Solid red: The remote stop was
successful and the engine is off.
Blinking red: The remote start or
stop failed.
Blinking green: The system is waiting
for a status update from the vehicle.
Power Windows: Global Opening and Closing
You can use the transmitter to operate the windows with the ignition off.
Open the windows for a short time after you unlock your vehicle with
the remote control. After you unlock your vehicle, press and hold the
transmitter unlock button to open the windows. Release the button once
movement starts. Press the lock or unlock button to stop movement.
To close the windows, press and hold the remote control lock button.
Release the button once movement starts. Press the lock or unlock
button to stop movement.
Automatic Climate Control Settings
The remote start feature allows you to pre-condition your vehicle’s interior.
When you set the climate control system to AUTO , it automatically adjusts the
cabin temperature during a remote start.
In hot weather, the air conditioning automatically turns on. In cold weather, the
heat automatically turns on. See the Climate Control chapter of your Owner’s
Manual for more details.
MyLincoln MobileTM*
This smartphone-compatible app combines vehicle service, client support
and driver convenience features.
For more details, visit support.lincoln.com/mylincolnmobile.
*if equipped*if equipped
2016 MKC

1312
Liftgate
Manual Liftgate
To Open the Liftgate
1. Unlock the vehicle and press the
button on the liftgate to unlatch.
2. Press the button located in the top
of the liftgate pull-cup handle.
Power Liftgate*
To Open Using the Outside Liftgate Button
1. Unlock the liftgate with the remote control
or power door control. If the intelligent
access transmitter is within 3 feet (1 meter)
behind the liftgate, the liftgate unlocks when
you press the liftgate release button.
2. Press the button located in the top
of the liftgate pull-cup handle.
3. Allow the power system to open the
liftgate after pressing the control.
4. To close, press and release the
control (pictured). To Open Using the Remote Transmitter
Open or close the liftgate with your remote control by
pressing the
button twice within three seconds.
A tone sounds when the liftgate activates. You can
also open or close the liftgate from inside the vehicle
by pressing the
button on the instrument panel.
Hands-free Liftgate Operation*
1. Make sure you have your intelligent access
transmitter within 3 feet (1 meter) of the liftgate.
2. Move your foot under and back from the rear
bumper, similar to a kicking (front-to-back) motion.
Do not move your foot sideways or the sensors
may not detect the motion.
Note: In vehicles equipped with the towing package,
you must kick your foot between the trailer hitch and
the exhaust system. Do not kick under the hitch.
Obstacle Detection*
When you use the power open or close feature and the liftgate detects a \
problem, warning tones sound and the liftgate stops.
The Liftgate Does Not Power Open or Close When
It detects an object in its opening or closing path.
The ignition is on and the transmission is not in park (P).
You are traveling at speeds at or above 3 mph (5 km/h).
Note: Entering the vehicle while the liftgate is closing could cause the
vehicle to bounce and activate obstacle detection.
Setting the Liftgate Open Height
Once you open the power liftgate, you can move it manually to a
desired height. If the previously programmed liftgate height is lower
than the fully opened position, you can manually push it upward.
To Program a New Height
1. Open the liftgate.
2. Stop the liftgate movement by pressing the control button on the
liftgate when it reaches your desired height. Once the liftgate stops
moving, you can also move it manually to your desired height.
3. Press and hold the control button on the liftgate until you hear a tone,\

indicating that your programming of the liftgate height is successful.
The next time you use the power feature to open the
liftgate, it opens to its newly programmed height.
To change the programmed height, repeat the process above.
Built-in Storage
Cargo tie-downs, located in key areas of the rear cargo area, fold out o\
f the
way when not in use.
Utility tray, located on the outboard side of the driver seat: store a wet
(or dry) umbrella within easy reach.
Toll-ticket holder, located between the headliner and the sun visor hinge:
slide your toll ticket in the space provided.
Rear under-floor storage helps secure items and keep them out of sight.
Liftgate and Built-in Storage
*if equipped*if equipped
2016 MKC