light MAZDA MODEL CX-5 2015 Quick Guide (in English)

3
Before Driving
ON/OFF button
Indicator light
Close
Open
Outside Mirrors
1. Rotate the mirror switch to the left or
right to choose the left or right side
mirror.
2. Press the mirror switch in the
appropriate direction.
For details, refer to Section 3, “Mirrors” or “Windows”.
Rearview Mirror
Auto-dimming mirror
The auto-dimming mirror automatically reduces
glare of headlights from cars at the rear when the
ignition is switched ON.
Press the ON/OFF button to cancel the automatic
dimming function. The indicator light will turn off.
To reactivate the automatic dimming function, press the
ON/OFF button. The indicator light will illuminate.
Operation of the Power Windows
Each passenger window can also be operated using the master control switches on
the driver's door.
To open the window to the desired position, lightly hold down the switch.
To close the window to the desired position, lightly pull up the switch.
Mirror switch
Centre position
Master control switches
Right rear window Left rear window
Front passenger's windowDriver's window
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

When Driving
5
Starting the Engine
For details, refer to Section 4, “Start/Stop Engine”.
(SKYACTIV-D 2.2)
• The starter does not rotate until the glow indicator light turns off.
• When starting the engine, do not release the clutch pedal (manual transaxle) or
the brake pedal (automatic transaxle) until the glow indicator light in the
instrument cluster turns off and the engine starts, after pressing the push button
start.
1. Make sure the parking brake is on.
2. Continue to press the brake pedal firmly until
the engine has completely started.
3. (Manual transaxle)
Continue to press the clutch pedal firmly until
the engine has completely started.
(Automatic transaxle)
Put the vehicle in park (P). If you must restart the
engine while the vehicle is moving, shift into
neutral (N).
4. Press the push button start after both the KEY indicator
light (green) (if equipped) in the instrument cluster and
the push button start indicator light (green) illuminate.
• If the clutch pedal (manual transaxle) or the brake pedal (automatic transaxle) is
released before the engine starts, depress the clutch pedal (manual transaxle) or
the brake pedal (automatic transaxle) again and press the push button start to
start the engine.
• If the ignition is left switched ON for a long period of time without the engine
running after the glow plugs are warmed up, the glow plugs may warm up again
which will illuminate the glow indicator light.
Push button start
Indicator light
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

6
When Driving
For details, refer to Section 4, “Start/Stop Engine”.
Operation of i-stop Function
The i-stop function automatically stops the engine when the vehicle is stopped at a
traffic light or stuck in traffic, and then restarts the engine automatically to resume
driving. The system provides improved fuel economy, reduced exhaust gas
emissions, and eliminates idling noise while the engine is stopped.
Engine idle stopping and restarting
NOTE
• The i-stop indicator light (green) turns on under the following conditions:
• When engine idling is stopped.
• The i-stop indicator light (green) turns off when the engine is restarted.
Manual transaxle
2. While depressing the clutch pedal, shift the shift lever to the neutral position.
Engine idling stops after the clutch pedal is released.
3. The engine restarts automatically when the clutch pedal is depressed. 1. Stop the vehicle by depressing the brake pedal and then the clutch pedal.
Automatic transaxle
2. The engine restarts automatically when the brake pedal is released with the
selector lever in the D or M position (not in second gear fixed mode).
3. If the selector lever is in the N or P position, the engine does not restart when
the brake pedal is released. The engine restarts when the brake pedal is
depressed again or the selector lever is shifted to the D, M (not in second gear
fixed mode) or the R position. (For the purposes of safety, always keep the
brake pedal depressed when shifting the selector lever while engine idling is
stopped.) 1. Engine idling stops when the brake pedal is depressed while the vehicle is
driven (except for driving in the R or M position second gear fixed mode) and
the vehicle is stopped.Engine idling stop conditions are met while the vehicle is being driven. • (Except European model)
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

7
When Driving
For details, refer to Section 4, “Start/Stop Engine”.
i-stop OFF Switch
By pressing the switch until a beep sounds,
the i-stop function is turned off and the i-stop
warning light (amber) in the instrument
cluster turns on. By pressing the switch again
until the beep sounds, the i-stop function
becomes operational and the i-stop warning
light (amber) turns off.
i-stop Warning Beep
If the driver's door is opened while engine idling is stopped, the warning sound
operates to notify the driver that engine idling is stopped. It stops when the driver's
door is closed.
i-stop indicator light (green)/i-stop warning light (amber)
i-stop indicator light (green)
• When the engine idling is stopped.
Engine idling stop conditions are met while the vehicle
is being driven.
• The light turns on when the ignition is switched ON and
turns off when the engine is started. i-stop warning light (amber)
• The light turns on when the i-stop OFF switch is
pressed and the system is turned off. • (Except European model)
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

8
When Driving
For details, refer to Section 4, “Instrument Cluster and Display”.
Warning/Indicator Lights
Signal Warning/Indicator Lights
1
2
3
4
7
8
9
10
11
12Brake System Warning Light Master Warning Light
ABS Warning Light
Charging System Warning
Indication/Warning Light
Engine Oil Warning Light
Check Engine Light
High Engine Coolant Temperature
Warning Light (Red)
i-stop Warning Light
(Amber)/Indicator Light (Green)
14
17
18
19Automatic Transaxle Warning
Indication
Power Steering Malfunction
Indication
20Air Bag/Front Seat Belt Pretensioner
System Warning Light
Low Fuel Warning Light
21Seat Belt Warning Light
22
2327
28
29
35
36
38
40Tyre Pressure Monitoring System
Warning Light
KEY Indication
High Beam Control System (HBC)
Warning Light (Amber)/Indicator
Light (Green)
TCS/DSC Indicator Light
TCS OFF Indicator Light
Low Engine Coolant Temperature
Indicator Light (Blue)
41
42
43
44
45Shift Position Indication
Headlight High-Beam Indicator Light
Direction indicator/Hazard Warning
Indicator Lights
Security Indicator Light
49
Cruise Main Indicator Light (Amber)/
Cruise Set Indicator Light (Green)
Lights-On Indicator Light
51Front Fog Light Indicator Light
Rear Fog Light Indicator Light
52Signal Warning/Indicator Lights
Warning (Display Indication)
Some of the warning/indicator lights are displayed in the instrument cluster.
If a warning/indicator light is displayed in the instrument cluster, verify the
meaning of the warning in the Warning (Display Indication) item.
Glow Indicator Light
Diesel Particulate Filter Indication
Wrench Indication31
32
33
Vehicle Speed Warning Indication
34Low Ambient Temperature Warning
Indication
Low Washer Fluid Level Warning
Indication 25
Mazda Radar Cruise Control
(MRCC) Warning Light
(Amber)/Indicator Light (Green) 46
24
Electric Parking Brake Indicator Light
Electric Parking Brake Warning Light
Lane-Keep Assist System Indication
Lane-Keep Assist System OFF Indication
Lane Departure Warning System
(LDWS) Indication
Lane Departure Warning System
(LDWS) OFF Indication
4WD Warning Indication
Door-Ajar Warning Indication
Liftgate-Ajar Warning Indication
Adaptive LED Headlights Warning
Light (Amber)/Indicator Light (Green)
Smart Brake Support/Smart City Brake
Support (SBS/SCBS) OFF Indicator Light
Smart City Brake Support (SCBS)
Warning Indication
i-ELOOP Indication
Select Mode Indication
Blind Spot Monitoring (BSM) OFF Indication
LED Headlight Warning Light 5
6
13
15
1630
37
39
47
48
50120 km/h Warning Light
26
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

When Driving
9
Automatic Transaxle Controls
Various Lockouts:
Indicates that you must depress
the brake pedal and hold in the
lock-release button to shift (The
ignition must be switched ON).
Indicates the selector lever can be
shifted freely into any position.
Indicates that you must hold in
the lock-release button to shift.
Drive Selection Switch
Drive Selection
Drive selection is a system to switch the vehicle's drive mode. When the sport mode
is selected, vehicle's response against accelerator operation is enhanced. Use the
sport mode when higher vehicle response is required such as merging onto
expressway or accelerating to overtake.
2. Pull the drive selection switch to the side
(backward) to cancel the sport mode.
1. Press the drive selection switch to the
side (forward) to select the sport mode.
Select Mode Indicator Light
When the sport mode is selected, the select mode
indication turns on in the instrument cluster.
For details, refer to Section 4, “Transaxle”, “Drive Selection”.
Lock-release button
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

10
When Driving
For details, refer to Section 4, “Switches and Controls”.
Higher sensitivity
Less sensitivitySwitch
Centre
position
Operation of the Headlights
Without auto-light control With auto-light control
Operation of the Windscreen Wipers
With intermittent wiper With auto-wiper control
Operation while pulling up lever
Intermittent (With intermittent wiper)
Low speed Switch
PositionWiper operation
High speed
When the wiper lever
is in the
position, the rain
sensor senses the
amount of rainfall on
the windscreen and
turns the wipers on
or off automatically.
Auto control (With auto-wiper control)
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

When Driving
11For details, refer to Section 4, “i-ACTIVSENSE”.
i-ACTIVSENSE
i-ACTIVSENSE is a collective term covering a series of advanced safety and driver
support systems which make use of a Forward Sensing Camera (FSC) and radar
sensors.
These systems consist of active safety and pre-crash safety systems.
Driver awareness support systems
• Adaptive Front Lighting System (AFS)
• High-Beam Control system (HBC)
• Adaptive LED Headlights
• Lane Departure Warning System (LDWS)
• Blind Spot Monitoring (BSM)
• Distance Recognition Support System (DRSS)
• Driver attention alert
These systems are designed to assist the driver in safer driving by reducing the load
on the driver and helping to avert collisions or reduce their severity. However,
because each system has its limitations, always drive carefully and do not rely
solely on the systems.
Active Safety Technology
Active Safety Technology supports safer driving by helping the driver to recognise
potential hazards and avert accidents.
Nighttime visibility
Forward/rear detection
Inter-vehicle distance recognition
Driver fatigue detection
• Rear Cross Traffic Alert (RCTA)
Rear obstruction detection when leaving a parking space
• Mazda Radar Cruise Control (MRCC)
• Lane-keep assist system
Inter-vehicle distance
Lane departure
• Adjustable Speed Limiter
Speed control
Collision damage reduction in low vehicle speed range
• Smart City Brake Support [Forward] (SCBS F)
Pre-Crash Safety Technology
Pre-crash safety technology is designed to assist the driver in averting collisions or
reduce their severity in situations where they cannot be avoided.
Forward driving
• Smart City Brake Support [Reverse] (SCBS R)
• Smart Brake Support (SBS)
Reverse driving
Collision damage reduction in medium/high speed range
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

12
When Driving
For details, refer to Section 4, “Adaptive LED Headlights”.
Adaptive LED Headlights
The adaptive LED headlights are controlled between high and low beams as follows
to assure the driver’s visibility without dazzling a vehicle ahead or a vehicle
approaching in the opposite direction.
This feature dims only the high-beam light shone on a vehicle ahead.
Glare-free high beam
The high beams will dim while driving at a speed of 40 km/h or faster. When the
vehicle speed is less than 30 km/h, the beams switch to the low beams.
NOTE
The headlight high-beam indicator light turns on while the high beams are on.
This feature extends the illumination range of the light cast by the low beams while
driving at a speed of 40 km/h or slower.
Wide-range low beam
This feature shifts the illumination angle of the light cast by the headlights upward
while driving on highways.
Highway mode
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD

13
When Driving
For details, refer to Section 4, “Adaptive LED Headlights”.
Adaptive LED Headlights
Other details are described in the related text.
NOTE
In the following situations, the adaptive LED headlights may not operate as
expected.
• When there are sources of light in the area such as street lamps, illuminated
signboards, and traffic signals.
• When there are reflective objects in the surrounding area such as reflective
plates and signs.
• When visibility is reduced under rain, snow and foggy conditions.
• When driving on roads with sharp curves or undulations.
The system switches the headlights to the high beams after the ignition is switched
ON and the headlight switch is in the AUTO position.
To turn on the system
CAUTION
Do not rely completely on the adaptive LED headlight system and drive the
vehicle while paying sufficient attention to safety. Switch the headlights between
the high and low beams manually if necessary.
Other details are described in the related text.
The adaptive LED headlight indicator light (green) in the instrument cluster turns
on while the adaptive LED headlights are operating.
Adaptive LED headlight indicator light (green)
%:A&8''.A'FKVKQPA3WKEM)WKFGKPFD