ECO mode MAZDA MODEL CX-5 2017 (in English) User Guide

4–1*Some models.
4When Driving
Information concerning safe driving and stopping.

Start/Stop Engine ................................ 4-4 Ignition Switch ............................... 4-4
Starting the Engine ......................... 4-5
Turning the Engine Off ................ 4-10

Instrument Cluster and Display ...... 4-12 Meters and Gauges ....................... 4-12
Multi-information Display and INFO
Switch
* ......................................... 4-20
Active Driving Display * ............... 4-28
Warning/Indicator Lights ............. 4-32

Manual Transaxle Operation ........... 4-39 Manual Transaxle Shift Pattern .... 4-39

Automatic Transaxle ......................... 4-42 Automatic Transaxle Controls ..... 4-42
Shift-Lock System ....................... 4-43
Transaxle Ranges ......................... 4-43
Manual Shift Mode ...................... 4-45
Driving Tips ................................. 4-50
Switches and Controls ...................... 4-51
Lighting Control ........................... 4-51
Fog Lights
* ................................... 4-57
Turn and Lane-Change Signals .... 4-57
Windshield Wipers and Washer ... 4-58
Rear Window Wiper and
Washer .......................................... 4-62
Rear Window Defogger ............... 4-62
Horn ............................................. 4-65
Hazard Warning Flasher ............... 4-65
HomeLink Wireless Control
System
* ......................................... 4-66

Brake .................................................. 4-70 Brake System ............................... 4-70
AUTOHOLD ............................... 4-75
Hill Launch Assist (HLA) ............ 4-81

ABS/TCS/DSC ................................... 4-82 Antilock Brake System (ABS) ..... 4-82
Traction Control System (TCS) ... 4-83
Dynamic Stability Control
(DSC) ........................................... 4-85

Fuel Economy Monitor ..................... 4-86 Fuel Economy Monitor
* ............... 4-86

Drive Selection ................................... 4-88 Drive Selection ............................. 4-88

i-ACTIV AWD ................................... 4-89 i-ACTIV AWD Operation
* ........... 4-89

CX-5_8FN1-EA-16L_Edition1.indb 12016/12/12 10:05:40

4–2*Some models.
Power Steering................................... 4-91 Power Steering ............................. 4-91

i-ACTIVSENSE................................. 4-92 i-ACTIVSENSE
* .......................... 4-92
Adaptive Front Lighting System
(AFS)
* .......................................... 4-95
High Beam Control System
(HBC)
* .......................................... 4-96
Blind Spot Monitoring (BSM) * .... 4-99
Traffi c Sign Recognition System
(TSR)
* ........................................ 4-105
Distance Recognition Support System
(DRSS)
* ...................................... 4-112
Rear Cross Traffi c Alert
(RCTA)
* ..................................... 4-117
Mazda Radar Cruise Control with
Stop & Go function (MRCC with Stop
& Go function)
* .......................... 4-121
Lane-keep Assist System (LAS) &
Lane Departure Warning System
(LDWS)
* .................................... 4-135
Smart City Brake Support
(SCBS)
* ...................................... 4-148
Smart Brake Support (SBS) * ...... 4-153
Forward Sensing Camera
(FSC)
* ......................................... 4-156
Radar Sensor (Front) * ................. 4-162
Radar Sensors (Rear) * ................ 4-165

Cruise Control ................................. 4-167 Cruise Control
* ........................... 4-167

Tire Pressure Monitoring System ... 4-172
Tire Pressure Monitoring
System
* ....................................... 4-172
Rear View Monitor .......................... 4-176
Rear View Monitor
* ................... 4-176
CX-5_8FN1-EA-16L_Edition1.indb 22016/12/12 10:05:40

4–13
When Driving
Instrument Cluster and Display


Dashboard Illumination..................................................\
........................................ page 4-16



Trip Computer and INFO Switch ........................................................................\
... page 4-17



Engine Coolant Temperature Gauge ...................................................................... page 4-15



Fuel Gauge ..................................................................\
........................................... page 4-15



Outside Temperature Display ................................................................\
................. page 4-17



Cruise Control Set Vehicle Speed Display ............................................................. page 4-17



Multi-information Display and INFO Switch ........................................................ page 4-20



Active Driving Display ........................................................................\
.................. page 4-28
Speedometer
The speedometer indicates the speed of the
vehicle.
Odometer, Trip Meter and Trip Meter Selector (Without Multi-
information Display)
The display mode can be changed from
odometer to trip meter A to trip meter B
and then back to odometer by pressing the
selector while one of them is displayed.
The selected mode will be displayed.


Selector
Press the selector Press the selector
Press the selector
Odometer
Trip meter A
Trip meter B


Odometer
The odometer records the total distance
the vehicle has been driven.
Trip meter
The trip meter can record the total distance
of two trips. One is recorded in trip meter
A, and the other is recorded in trip meter
B.

For instance, trip meter A can record the
distance from the point of origin, and
trip meter B can record the distance from
where the fuel tank is
fi lled.

When trip meter A is selected, pressing
the selector again within one second will
change to trip meter B mode.

When trip meter A is selected, TRIP A
will be displayed. When trip meter B is
selected, TRIP B will be displayed.

The trip meter records the total distance
the vehicle is driven until the meter
is again reset. Return it to “0.0” by
depressing and holding the selector for
one second or more. Use this meter to
measure trip distances and to compute fuel
consumption.
CX-5_8FN1-EA-16L_Edition1.indb 132016/12/12 10:05:42

4–17
When Driving
Instrument Cluster and Display
NOTE
  (With Multi-information Display)  The illumination dimmer can be
canceled by pressing the dashboard
illumination knob.
  When the illumination dimmer is
canceled, the instrument cluster cannot
be dimmed even if the position lights are
turned on.
  When the illumination dimmer is
canceled, the screen in the center
display switches to constant display of
the daytime screen.

Outside Temperature Display (Without Multi-information
Display)
When the ignition is switched ON, the
outside temperature is displayed.



NOTE
Under the following conditions, the
outside temperature display may differ
from the actual outside temperature
depending on the surroundings and vehicle
conditions:
  Signifi cantly cold or hot temperatures.  Sudden changes in outside temperature.  The vehicle is parked.  The vehicle is driven at low speeds.

Changing the Temperature Unit of the
Outside Temperature Display
The outside temperature unit can be
switched between Celsius and Fahrenheit.
Settings can be changed by operating the
center display screen.
Refer to Personalization Features on page
9-11 .
NOTE
When the temperature unit indicated in the
outside temperature display is changed,
the temperature unit indicated in the
engine coolant gauge display changes in
conjunction with it.

Cruise Control Set Vehicle Speed
Display (Without Multi-
information Display)
The vehicle speed preset using the cruise
control is displayed.



Trip Computer and INFO Switch (Without Multi-information
Display)
The following information can be selected
by pressing the INFO switch with the
ignition switched ON.
   Distance-to-empty mode  Average fuel economy mode  Current fuel economy mode  Compass mode
If you have any problems with your trip
computer, consult an Authorized Mazda
Dealer.
CX-5_8FN1-EA-16L_Edition1.indb 172016/12/12 10:05:43

4–18
When Driving
Instrument Cluster and Display
Distance-to-empty mode
This mode displays the approximate
distance you can travel on the remaining
fuel based on the fuel economy.

The distance-to-empty will be calculated
and displayed every second.


NOTE
  Even though the distance-to-empty
display may indicate a suf fi cient amount
of remaining driving distance before
refueling is required, refuel as soon as
possible if the fuel level is very low or
the low fuel warning light illuminates.
   The display may not change unless you
add more than approximately 9 L
(2.3 US gal, 1.9 Imp gal) of fuel.
  The distance-to-empty is the
approximate remaining distance the
vehicle can be driven until all the
graduation marks in the fuel gauge
(indicating the remaining fuel supply)
disappear.
  If there is no past fuel economy
information such as after fi rst
purchasing your vehicle or the
information is deleted when the battery
cables are disconnected, the actual
distance-to empty/range may differ from
the amount indicated.

Average fuel economy mode
This mode displays the average fuel
economy by calculating the total fuel
consumption and the total traveled
distance since purchasing the vehicle, re-
connecting the battery after disconnection,
or resetting the data. The average fuel
economy is calculated and displayed every
minute.



To clear the data being displayed, press the
INFO switch for more than 1.5 seconds.
After pressing the INFO switch,
- - - L/100 km (- - - mpg) will be displayed
for about 1 minute before the fuel
economy is recalculated and displayed.
Current fuel economy mode
This mode displays the current fuel
economy by calculating the amount of fuel
consumption and the distance traveled.

Current fuel economy will be calculated
and displayed every 2 seconds.



When you've slowed to about 5 km/h
(3 mph), - - - L/100 km (- - - mpg) will be
displayed.
CX-5_8FN1-EA-16L_Edition1.indb 182016/12/12 10:05:43

4–20
When Driving
Instrument Cluster and Display
*Some models.
Multi-information Display and INFO Switch *

INFO switch
Multi-information Display

The multi-information display indicates the following information.
   Odometer  Trip meter  Engine coolant temperature gauge  Fuel gauge  Outside temperature  Distance-to-empty  Average fuel economy  Current fuel economy  Maintenance Monitor  Blind Spot Monitoring (BSM) Display  Distance Recognition Support System (DRSS) Display  Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go\
function)
System Display
   Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS) Display  Cruise Control Display  Compass Display  Warning message
CX-5_8FN1-EA-16L_Edition1.indb 202016/12/12 10:05:43

4–22
When Driving
Instrument Cluster and Display
Odometer, Trip Meter and Trip Meter Selector
The odometer is constantly displayed on
the screen when the ignition is switched
ON, and the TRIP A or TRIP B screen
can be displayed by operating the INFO
switch.


Press the INFO switch INFO switch
Odometer,
Trip meter A
Odometer,
Trip meter B

Odometer
The odometer records the total distance
the vehicle has been driven.
Trip meter
The driving distance for a speci fi ed
interval is indicated. Two types (TRIP
A, TRIP B) of interval distance and the
average fuel economy for each can be
measured.

For instance, trip meter A can record the
distance from the point of origin, and
trip meter B can record the distance from
where the fuel tank is fi lled.

When trip meter A is selected, TRIP A
will be displayed. When trip meter B is
selected, TRIP B will be displayed.

The trip meter and average fuel economy
can be reset by pressing the INFO switch
for 1.5 second or more while in each
mode.
NOTE
   Only the trip meters record tenths of
kilometers (miles).
  The trip record will be erased when:   The power supply is interrupted
(blown fuse or the battery is
disconnected).
  The vehicle is driven over 1999 km
(mile).


CX-5_8FN1-EA-16L_Edition1.indb 222016/12/12 10:05:44

4–25
When Driving
Instrument Cluster and Display
Average Fuel Economy
The average fuel economy is calculated
every minute from the total traveled
distance on the trip meter and the total
fuel consumption, and the average fuel
economy for either TRIP A or TRIP B is
displayed.


The average fuel economy and trip
meters can be reset by pressing the INFO
switch for 1.5 s or more while in each
mode. After the data is cleared, the fuel
consumption is recalculated and the
- - - L/100 km (- - - mpg) for the one
minute prior to it being displayed is
indicated.
Current Fuel Economy
This displays the current fuel economy
by calculating the amount of fuel
consumption and the distance traveled.



Maintenance Monitor
The following maintenance period
notifi cations can be displayed by turning
the Maintenance Monitor on.
   Scheduled Maintenance  Tire Rotation  Oil Change
For the setting method and indications
for the maintenance monitor, refer to the
Maintenance Monitor.
Refer to Maintenance Monitor on page
6-16 .
The maintenance monitor displays the
information when the ignition is switched
ON.
NOTE
This function is inoperable while the
vehicle is being driven.

Message display
When the remaining time or the distance
approaches 0, a message is displayed each
time the ignition is switched ON.


CX-5_8FN1-EA-16L_Edition1.indb 252016/12/12 10:05:45

4–26
When Driving
Instrument Cluster and Display
*Some models.
NOTE
  If any of the INFO switch is pressed
while a message is displayed, it will no
longer be displayed the next time the
ignition is switched ON.
  After the vehicle is serviced and the
remaining time/distance is reset, the
message for the next maintenance
period will be displayed when the
remaining distance or time to the next
maintenance period approaches 0
(displays when engine is started).
  If there are multiple messages, they are
displayed according to their order.
  If OFF is set for Messages, messages
are not displayed.

Blind Spot Monitoring (BSM) Display
Displays the system status.



Refer to Blind Spot Monitoring (BSM) on
page 4-99 .
Distance Recognition Support
System (DRSS) Display *
Displays the distance between your
vehicle and the vehicle ahead.



Refer to Distance Recognition Support
System (DRSS) on page 4-112 .
Mazda Radar Cruise Control with Stop & Go function (MRCC with
Stop & Go function) Display
*
Displays the currently set system status.



Refer to Mazda Radar Cruise Control with
Stop & Go function (MRCC with Stop &
Go function) on page 4-121 .
CX-5_8FN1-EA-16L_Edition1.indb 262016/12/12 10:05:45

4–35
When Driving
Instrument Cluster and Display
*Some models.
Signal Warning Page


* Door-Ajar Warning Indication
7-31


* Liftgate-Ajar Warning Indication
7-31

* Door-Ajar Warning Light
7-31
*1 The light turns on when the ignition is switched on for an operation che\
ck, and turns off a few seconds later or when the engine is started. If the light does not turn on or remains tur\
ned on, have the vehicle inspected at an
Authorized Mazda Dealer.
*2 The light turns on continuously when the electric parking brake (EPB) \
is applied.


Indication/Indicator Lights
These lights turn on or fl ash to notify the user of the system operation status or a system
malfunction.

Signal Indicator Page

* Front Passenger Air Bag Deactivation Indicator Light *1
2-61


(Green) * KEY Indicator Light
4-5

Security Indicator Light *1
3-46

* Wrench Indication/Indicator Light *1
4-38


(Blue) * Low Engine Coolant Temperature Indicator Light
4-38
CX-5_8FN1-EA-16L_Edition1.indb 352016/12/12 10:05:49