light MAZDA MODEL MX-30 EV 2022 Owner's Guide

Luggage or other items placed under
the front passenger seat or between
the front passenger seat and driver
seat that push up the front passenger
seat bottom.
 Any accessories which might
decrease the total seated weight on
the front passenger seat are attached
to the front passenger seat.
The front passenger front and side air
bags and knee air bags, and the seat
belt pretensioner system will
deactivate if the front passenger air
bag deactivation indicator light
illuminates.

Do not increase the total seated
weight on the front passenger seat:
When an infant or small child sits on
the front passenger seat, increasing the
total seated weight on the front
passenger seat is dangerous. The front
passenger seat weight sensors will
detect the increased total seated
weight, which could result in the
unexpected deployment of the front
passenger front and side air bags and
knee air bags, and seat belt
pretensioner system in an accident and
may cause serious injury. Increasing the
total seated weight on the front
passenger seat could result in the front
passenger front and side air bags and
knee air bags, and seat belt
pretensioner system deployment in an
accident under the following
conditions, for example:
 Luggage or other items are placed on
the seat with the child in the
child-restraint system.
 The front passenger seat contacts the
vehicle ceiling.A rear passenger or luggage push or
pull down on the front passenger
seatback.
 A rear passenger steps on the front
passenger seat rails with their feet.
 Luggage or other items are placed on
the seatback or hung on the head
restraint.
 Heavy items are placed in the
seatback map pocket.
 The seat is washed.
 Liquids are spilled on the seat.
 The front passenger seat is moved
backward, pushing into luggage or
other items placed behind it.
 The front passenger seatback
contacts the rear seat.
 Luggage or other items are placed
between the front passenger seat
and driver seat.
 Any accessories which might increase
the total seated weight on the front
passenger seat are attached to the
front passenger seat.
CAUTION
To assure proper deployment of the
front air bag and to prevent damage
to the sensors in the front seat
bottoms:
 Do not place sharp objects on the
front seat bottoms or leave heavy
luggage on them.
 Do not spill any liquids on the
front seats or under the front seats.
 To allow the sensors to function
properly, always perform the
following:
 Adjust the front seats as far back as
possible and always sit upright
against the seatbacks with seat
belts worn properly.
Essential Safety Equipment
SRS Air Bags
2-67
MX -30_8JD4-EA -21G_Edition2_new 2021-5-18 14:38:07

If you place your child on the front
passenger seat, secure the
child-restraint system properly and
slide the front passenger seat as far
back as possible (page 2-44).
NOTE
The system requires about 10
seconds to alternate between turning
the front passenger front and side air
bags and knee air bags, and seat belt
pretensioner system on or o ff.
The front passenger air bag
deactivation indicator light may
illuminate repeatedly if luggage or
other items are put on the front
passenger seat, or if the temperature
of the vehicle's interior changes
suddenly.
The front passenger air bag
deactivation indicator light may
illuminate for 10 seconds if the total
seated weight on the front passenger
seat changes.
The air bag/front seat belt
pretensioner system warning light
might illuminate if the front
passenger seat receives a severe
impact.
If the front passenger air bag
deactivation indicator light does not
illuminate after installing a
child-restraint system on the front
passenger seat,
first, re-install your
child-restraint system according to
the procedure in this owner's
manual. Then, if the front passenger
air bag deactivation indicator light
still does not illuminate, install the
child-restraint system on the rear seat
and consult an Authorized Mazda
Dealer as soon as possible.
If the front passenger air bag
deactivation indicator light
illuminates when an adult is seated
in the front passenger seat, have the
passenger re-adjust their posture by
sitting with their feet on the floor,
and then re-fastening the seat belt. If
the front passenger air bag
deactivation indicator light still
illuminates, move the passenger to
the rear seat. If sitting in the rear seat
is not possible, slide the front
passenger seat as far back as
possible. Consult an Authorized
Mazda Dealer as soon as possible.
▼ Driver and Front Passenger Buckle
Switches
The buckle switches on the front seat
belts detect whether or not the front
seat belts are securely fastened and
further control the deployment of the
air bags.
Essential Safety Equipment
SRS Air Bags
2-68
MX
-30_8JD4-EA -21G_Edition2_new 2021-5-18 14:38:07

Constant Monitoring
▼Constant Monitoring
The following components of the air
bag systems are monitored by a
diagnostic system:

Front air bag sensorsCrash sensors, and diagnostic
module (SAS unit)
Side crash sensorsAir bag modulesFront seat belt pretensionersAir bag/Front seat belt pretensioner
system warning light
Related wiring
Driver seat slide position sensorFront passenger occupant
classi
fication sensor
Front passenger occupant
classification module
Front passenger air bag deactivation
indicator light
Front passenger seat belt buckle
switch

The diagnostic module continuously
monitors the system's readiness. This
begins when the power switch is
switched ON and continues while the
vehicle is being driven.
Essential Safety Equipment
SRS Air Bags
2-69
MX -30_8JD4-EA -21G_Edition2_new 2021-5-18 14:38:07

cooperate in ensuring that the vehicle's
high voltage battery is collected.
WARNING
Appropriate disposal of the high
voltage battery:
If the high voltage battery is not
collected and disposed of
appropriately, such as by leaving it
unattended or illegally abandoning it,
some other person may touch it which
could cause an electrical shock
accident leading to serious injury.
▼Accident Occurs
If the vehicle receives an impact of a
certain level or greater in a collision,
the EV system stops. In this case, the
EV system malfunction warning
indication/warning light displays/turns
on and the EV system may not start.
Contact an Authorized Mazda Dealer
immediately.
WARNING
Never touch electrical wiring that may
be protruding into or outside of the
cabin:
Otherwise, it could result in electrical
shock and serious injury.
Never touch any area where
electrolyte is visible or electrolyte is
leaking from the area:
If any electrolyte from the high voltage
battery gets in the eyes or on the skin,
it could cause loss
of vision or skin
reactions. In the unlikely event that
electrolyte comes into contact with the
eyes or skin, flush with large quantities
of water immediately and seek
immediate medical attention.
Never approach objects that are on
fi re or extremely hot:
Electrolyte in the high voltage battery
may cause a fire.
If the vehicle catches fire, extinguish
the fire using a fire extinguisher (type
ABC, BC, or C).
Only extinguish a fire with water when
a large amount of water is available
such as from a fire hydrant. Otherwise,
it could lead to an accident.
▼ Advice for Using Electric Vehicles
Unique sound and vibration occurring
with electric vehicles
Electric vehicles have a unique sound
and vibration which di
ffer from
non-electric vehicles. The following
sounds or vibration may occur,
however, this is unique to electric
vehicles and it does not indicate a
problem.
Motor operation sound.Operation sound of coolant pump
and cooling fan while charging.
Operation sound of regenerative
braking.
Relay operation sound when EV
system is started or stopped.
Brake system operation sound and
vibration.
Operation sound of brake system
Sound can be heard from the front of
the vehicle under the following
conditions:
The driver's door is opened.The power switch is switched ON.The brake pedal is operated.The brake system operates
automatically.
Several minutes have passed since
the EV system was stopped.
Vibration of brake pedal
Before Driving
Electric Vehicles
3-5
MX -30_8JD4-EA -21G_Edition2_new 2021-5-18 14:38:07

NOTE
When the cruise control and the Mazda Radar Cruise Control with Stop & Go
function (MRCC with Stop & Go function), or the Traffic Jam Assist (TJA) is
operating, the steering wheel paddle setting cannot be changed.
When performing the following operations , the steering wheel paddle returns to
the default setting.
Plus switch (+/OFF) is kept pull ed for a certain period of timeSelector lever is shifted to any position from DPower switch is switched OFF
Indication
The operation condition of the steering wheel paddle is displayed on the
multi-information display.
1. Steering wheel paddle display
Indication Switch operation
Regenerative
braking force Acceleration
Plus switch (+/
OFF) Minus switch (–)
-Weak
Quickly
Slightly weak Slightly quick
Normal Normal
Slightly strong Slightly slow
- Strong Slowly
Before Driving
Electric Vehicles
3-8
MX-30_8JD4-EA -21G_Edition2_new 2021-5-18 14:38:07

Particular driving situation
1. Driving on a downward slope or during traffic jams
2. Driving on an upward slope or expressways
NOTE
If the high voltage battery level is high or the high voltage battery temperature is
low, the indication on the multi-informat ion display changes because regenerative
braking is restricted, however, there may be a small change in the regenerative
braking force or no change at all.
The brake lights may turn on when the regenerative braking force is strong.
▼ Approaching vehicle audible
system
The approaching vehicle audible
system noti
fies pedestrians of the
vehicle approaching using a warning
sound while driving at low speeds.
The approaching vehicle audible
system operates under the following
conditions.
The vehicle accelerates from a stop
and the vehicle speed is 30 km/h
(19 mph) or slower.
The vehicle decelerates and the
vehicle speed is 25 km/h (16 mph)
or slower.
You release your foot from the brake
pedal with the selector lever in a
position other than P.
▼ Electronic sound
Electronic sound is a system that uses a
speaker to emit sound into the cabin
to notify the driver of the vehicle's
behavior.
The electronic sound operates when all
of the following conditions are met.
The selector lever is in a position
other than N and P.
All the doors and the liftgate are
closed.
Emergency braking is not being
performed.
Before Driving
Electric Vehicles
3-9
MX
-30_8JD4-EA -21G_Edition2_new 2021-5-18 14:38:07

Charging
▼Cautions Concerning Charging
WARNING
For occupants who use any medical
device such as an implanted-type
heart pacer or
defibrillator, ask a
doctor or manufacturer of the device
about how the medical device may be
a ff ected by the charging operation:
Otherwise, the operation of the
medical device could be a ffected
resulting in an accident.
For occupants who use any medical
device such as an implanted-type
heart pacer or de fibrillator, do not
enter the cabin including the luggage
compartment while charging:
Otherwise, the operation of the
medical device could be a ffected
resulting in an accident.
Do not disassemble or modify the
charge port and the charge cable:
Otherwise, it could lead to an
electrical shock resulting in an
accident.
Always heed the following when
charging:
Otherwise, it could lead to an
electrical shock resulting in an
accident.
 Never allow children to charge the
high voltage battery.
 Do not charge the high voltage
battery while the vehicle is covered
with a car cover.
Always heed the following when
charging in the rain or snow:
Otherwise, it could lead to an
electrical shock resulting in an
accident.
 Do not charge the high voltage
battery outside if there is the
possibility of heavy rain, strong
winds, or lightning.
 Remove water with a clean cloth if
the charge connector or charge plug
is wet.
 Do not touch the charge port or
charge cable with wet hands.
 If the outlet is covered with snow
while charging, turn o ff the power
such as turning o ff the breaker,
remove the snow, and then remove
the charge plug.
Do not use the charge cable if it has
any of the following malfunctions:
Otherwise, it could lead to an
electrical shock resulting in an
accident.
 The charge connector is rusted or
corroded.
 The charge connector is damaged or
foreign matter penetrates the charge
connector.
Refer to the instruction manual
accompanying the charge cable and
use the charge cable correctly:
If you handle the charge cable
incorrectly, it could result in an
unexpected accident.
Always heed the following when
using the charge cable:
Otherwise, the charge cable could be
damaged resulting in an accident.
 Do not pull out or bend the charge
cable excessively.
Before Driving
Electric Vehicles
3-10
MX -30_8JD4-EA -21G_Edition2_new 2021-5-18 14:38:07

Charge connector
The charge connector is used for
connecting to the normal charge port.

When the charge connector is
connected to the normal charge port,
a vehicle system locks the charge
connector.
When the charge connector is locked
by the vehicle system, it unlocks when
the driver’s door is unlocked.
If the charge connector locked by the
vehicle system is not unlocked even
though the driver’s door is unlocked,
consult an Authorized Mazda Dealer.

The conditions for locking the system
on the vehicle side can be changed.
For the procedure to change the
conditions, refer to Charging Settings
on page 3-21.
Control box
The control box indicates the charge
status by turning on/flashing the
indicator light.
For the indicator light illumination/
fl ash pattern, refer to the instruction
manual accompanying the charge
cable.
Charge plug
The charge plug is the part for
connecting to the power supply.
Charge port
The charge port refers to the area
where the charge connector is
connected.
The component parts of the charge
port are as follows.
1. Charge indicator
2. Normal charge port
3. Normal charge port cap
4. Charge lid
5. Quick charge port cap
6. Quick charge port
Charge indicator
The charging indicator indicates the
charging status by turning on/flashing
the light.
For the charging indicator
illumination/ flash pattern, refer to
Checking Charging Status on page
3-18.
Normal charge port
The normal charge port is the part to
which the connector of the charge
cable is connected. This is used for
normal charging.
Charge lid
The charge lid is locked/unlocked in
conjunction with the door locking/
unlocking mechanism.
When unlocking the driver’s door, the
charge lid is unlocked. When locking
the driver’s door, the charge lid is
locked.
However, if the driver’s door is
unlocked using the auxiliary key, the
charge lid is not unlocked.
Before Driving
Electric Vehicles
3-13
MX -30_8JD4-EA -21G_Edition2_new 2021-5-18 14:38:07

conditions, both the battery and
ambient temperature will affect the
required charging time and, in certain
situations, this may lead to a signi ficant
increase in the charging time.
Normal charging
Normal Charging can be performed at
home using either a household power
source such as a wall outlet or wall
box, or similar method (alternating
current). Additionally, charging can be
performed at a public charging facility
using a charger other than a quick
charger (direct current).
When charging is started after the
remaining high voltage battery power
warning indication/warning light turns
on, the time it takes to fully charge the
high voltage battery at a public AC
charging facility is about 5 hours. Using
a household power source for charging
will increase the charging time to fully
charge the high voltage battery.
For normal charging , the charging
timer function can be used to charge
automatically from start to finish.
For details on how to use the charging
timer function, refer to Charging
Settings on page 3-21.
Quick charging
When charging is started at a quick
charging station (DC with 50 kW or
higher) the high voltage battery can be
charged from a 20% to 80% battery
charge level in about 36 minutes. The
exact charging time depends on
various conditions at the time of
charging , such as the type of charger,
battery condition, ch arging patterns, as
well as the battery temperature and
ambient temperature. In cold weather
conditions, both the battery and
ambient temperature will aff ect the
required charging time and, in certainsituations, this may lead to a significant
increase in the charging time.
WARNING
Always heed the following when
using a quick charger:
Otherwise, it could lead to an
accident.
 Do not use a charge cable which
exceeds 30 m (98 ft).
 This vehicle is compatible with quick
chargers with charge cables of 30 m
(98 ft) or shorter and which do not
charge other devices or vehicles at
the same time.

How to perform normal charging
1. Shift the selector lever to the P position.
2. Switch the power switch OFF.
3. Press the location shown in the figure to open the charge lid.
4. Open the normal charge port cap.
1. Normal charge port cap
Before Driving
Electric Vehicles
3-15
MX -30_8JD4-EA -21G_Edition2_new 2021-5-18 14:38:07

Immediately after switching to
daylight savings, charging may occur
at the charging timer time set before
the switch to daylight savings until
the power switch is switched ON.

Edit
Function Available setting
changes
Start Time
Select the desired charging
start time. Time
(10-minute inter- vals)
End Time
Select the desired charging
end time. Time
(10-minute inter- vals)
Repeat
Select the day(s) of the
week to repeat. Monday
― Sun-
day
Charge Limit
Select the desired charge
limit method. According to Bat-
tery Charge Level, According to Esti- mated Range
Battery Charge Level
*1
Select the desired maxi-
mum charge level. 100%
― 10%
(10 levels)
Estimated Range
*2
Select the desired estimat-
ed range. In 10 km incre-
ments
*1 Can be changed when According to Battery
Charge Level is selected for Charge Limit.
Use when you want to charge only the
amount of charging you need. This helps you
save power and prevent high voltage battery
deterioration.
*2 Can be changed when According toEstimated Range is selected for Charge
Limit.
Use when you want to charge according to
your planned driving distance.
The distance-to-full discharge changes
depending on the driving conditions and
surrounding environment. Check the actual
remaining distance-to-full discharge.
If you change the distance unit after setting
the Estimated Range, the Estimated Range
will be calculated in the unit after the
change. (If you change the units to miles
after setting the estimated range to 100 km,
the charge distance will be for 60 miles.)
NOTE
A charging day is set using Repeat
If 1 repeat day is set, charging is
repeated every week on the set day
of the week.
Depending on the set days of the
week, the Repeat indication is
displayed as Weekdays, Weekends,
and Daily. Otherwise, it is displayed
as Custom.
Setting example
Function Available setting
changes
Start Time 21 : 00
End Time 6 : 00
Repeat Friday
Charge Limit According to Bat-
tery Charge Level
Battery Charge Level 80 %
In this case, charging is done every
week from Friday at 21 : 00 hours to
Saturday at 6:00 hours. However, if
the Battery Charge Level reaches
80%, the charging is stopped even if
it is before the End Time.
No day is set using Repeat
If no Repeat day is designated,
charging is done only 1 time at the
set hours.
Before Driving
Electric Vehicles
3-22
MX -30_8JD4-EA -21G_Edition2_new 2021-5-18 14:38:07