MERCEDES-BENZ CL-Class 2004 C215 Comand Manual

62 AudioMP3-CD operation
Use g or G to select a folder.

Press E.
The list of the tracks in the folder is
displayed. 5 tracks are displayed.

Use g or G to navigate through the
track list.

Press the
Play
soft key
.
or

Press E to play the selected track.

Soft key :
Brings you one level up in the folder
structure.Displaying title information

Activate the MP3-CD menu main
(page 58).

Press the
Show
soft key.
The information on the current track
stored on the MP3-CD is displayed.

63 Audio
DVD operation
Automatic screen off
Upon loading a DVD, the following mes-
sage will appear: To prevent the driver from being
distracted, the picture is faded
out.
Treat DVDs with care to prevent
malfunctions during playback.

Do not scratch, touch or soil your
DVDs.

Do not attach labels to or write on your
DVDs.
General information on DVD operation

Warning
G
In order to avoid distraction which could
lead to an accident, the driver should insert
DVDs with the vehicle at a standstill and
operate the audio system only if permitted
by road, weather and traffic conditions.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your car covers a
distance of 50 feet (approximately 14 m)
every second.
Warning
G
The CD/DVD drive is a Class 1 laser pro-
ducts. There is a danger of invisible laser ra-
diation when you open or damage the cover.
Do not remove the cover. The CD/DVD drive
does not contain any parts which can be ser-
viced by the user. For safety reasons, have
any necessary service work performed by
qualified personnel.iYour CD/DVD drive has been designed
to play CDs/DVDs which correspond to
the EN 60908 standard.
If you insert thicker data carriers, e.g.
ones that have data on both sides (one
side with DVD data, the other side with
audio data), they cannot be ejected and
will damage the drive.
!The COMAND system is capable of
playing DVDs. However, in order to
avoid driver distraction, the video func-
tion is disabled and no images will be
shown on the COMAND screen.

DVD operation

64 AudioDVD operation
From time to time, clean your DVDs
with a commercially available cleaning
cloth. Never wipe circularly, but in a
straight line from inside to outside.

After use, put your DVDs into the DVD
box.

Protect your DVDs from high
temperatures and direct sunlight.

Load a video DVD into the COMAND
(page 65).
or

If a DVD is already loaded, open the Au-
dio menu (
page 30) and press the
DVD
soft key.
If the video DVD meets the playback re-
quirements, playback will begin. If avai-
lable, the DVD menu (
page 70) saved
on the DVD will appear.
DVD playback requirementsiVendors may offer DVDs which do not
comply with the standards.
Sound, picture and other playback
problems may occur when you play
such DVDs.
The COMAND can playback video
DVDs meeting the following
requirements:
Regional code is set (factory
setting)

NTSC or PAL TV standard
The appropriate information is usually
given either on the DVD or the DVD
box. The factory setting of the
COMAND is regional code 1. The
setting can be changed in a Mercedes-
Benz Service Center. This will allow you
to playback video DVDs with other
regional codes, as long as they comply
with the NTSC or PAL TV standard.
iThe COMAND system is capable of
playing DVDs. However, in order to
avoid driver distraction, the video
function is disabled and no images will
be shown on the COMAND screen.Switching to DVD operation

65 Audio
DVD operation

Press l while COMAND is being ac-
tivated.
The display will change.

Press the
CD/DVD
soft key
(
page 41).
The DVD slot opens.

Insert a video DVD into the slot.
The COMAND inserts the DVD.
If the video DVD meets the playback
requirements (
page 64), playback
will begin.
If available, the DVD menu (
page 70)
saved on the DVD will appear.
Loading a DVD Warning
G
In order to avoid distraction which could
lead to an accident, the driver should insert
DVDs with the vehicle at a standstill and
operate the audio system only if permitted
by road, weather and traffic conditions.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your car covers a
distance of 50 feet (approximately 14 m)
every second.iA DVD already loaded must be ejected
before inserting a new DVD. Inserting a
second DVD with another DVD still loa-
ded will cause damage to the DVD dri-
ve which is not covered by the
Mercedes-Benz Limited Warranty.
iYour CD/DVD drive has been designed
to play CDs/DVDs which correspond
to the EN 60908 standard.
If you insert thicker data carriers, e.g.
ones that have data on both sides (one
side with DVD data, the other side with
audio data), they cannot be ejected
and will damage the drive.
iThe DVD should be inserted with the la-
bel side up.

66 AudioDVD operation
If the video DVD does not have regional
code 1 (
page 64), the following
message appears:
DVD Cannot be
Played - Invalid Regional
Code
.
Further error messages are:

No DVDNo DVD inserted in the slot.
Load a DVD (
page 65).

No Valid DVDCannot read DVD.
Load a DVD (
page 65) which
meets the DVD playback require-
ments (
page 64).

DVD ErrorDVD cannot be read or is damaged.
Load another DVD (
page 65).

DVD Device ErrorThe drive may be damaged.
Contact an authorized Mercedes-
Benz Center.

Press l.
The display will change (
page 65).

Press the
CD/DVD
soft key.
The COMAND ejects the DVD.

Remove the DVD from the slot.Ejecting a DVDiIf you do not remove the DVD from the
slot, the COMAND will insert it again af-
ter a short time.

67 Audio
DVD operation
When you start DVD playback, the soft key
displays and the status bar are initially
blanked out.
Displaying the soft keys
In the DVD mode, press any soft key.
The soft keys and the status bar are
displayed.
DVD playback with soft key display and
status barThe DVD information is displayed at the
center of the status bar.E.g.:

Ttl. 5
= Track/movie no. 5 is being
played

Sce. 1
= Scene/chapter 1 is being
played

0:00:47
= DVD playing time elapsed
(47 seconds)
The soft keys and the status bar are auto-
matically blanked out again. You can also
blank out the display manually.
To remove the soft key display

Press the
Full Scr.
soft key.
Soft key display and status bar

68 AudioDVD operation
Pause
or
Play
soft key:
Switches the Pause function on or off
(
page 68).

Stop
soft key:
Stops the DVD playback (
page 69).

Full Scr.
soft key:
The soft key display disappears
(
page 69).

Menu
soft key:
Displays the DVD menu saved on the
DVD, if available (
page 70).

Setting
soft key:
Displays the DVD settings menu
(
page 71).

Sound
soft key:
Brings you to the sound menu, where
you can set:

Balance and Fader (
page 25)

Bass and Treble (
page 26)

Sound functions* (
page 27)

Bright.
, Contr.
und
Color
soft
key
s:
Allow you to adjust brightness, cont-
rast and color (
page 74).Pause function

Display the soft keys (
page 67).

Press the
Pause
soft key.
DVD playback is paused. The picture
stands still. The Pause
soft key
changes to
Play
.

To resume playback, press the
Play

soft key.
Playback of the DVD will resume.
Soft key functionsiDepending on the DVD, not all func-
tions are available at any time.

69 Audio
DVD operation
Stopping DVD playback
Display the soft keys (
page 67).

Press the
Stop
soft key.
DVD playback stops.
Restarting DVD playback

After playback has stopped, press the Play
soft key again.
The DVD is played from the start.
or

Select a movie (
page 74).Displaying full screen

During DVD playback with the soft keys
displayed press the
Full
screen
soft
key.
The soft keys disappear. The full screen
will appear.Activating DVD menu

Display the soft keys (
page 67).

Press the
Menu
soft key.
The highest level of the DVD menu is
displayed, if available (
page 70).
Activating Settings menu

Display the soft keys (
page 67).

Press the
Setting
soft key.
The DVD settings menu will appear
(
page 71).
iWhile DVD playback is stopped, you
can press the
Menu
soft key.
The DVD menu saved on the DVD is dis-
played, if available (page 70).

70 AudioDVD operationThe DVD menu is the menu saved on the
DVD. The structure of the menu may vary
depending on the DVD and allows certain
settings or actions.
For example, multilingual DVDs allow the
DVD language to be selected in the menu.
Activating DVD menu 
Display the soft keys (
page 67).

Press the
Menu
soft key.
The highest level of the DVD menu is
displayed.

Remove the soft key display if necessa-
ry (
page 67).
The soft keys are automatically remo-
ved after a while.
Selecting an item from the DVD menu

Use h, H, g or G to select a
menu item.

Press E.
Your selection is confirmed. The
COMAND will perform the action defi-
ned by the menu item selected.Going up one level in the menu
A DVD menu may contain several subme-
nus. Submenus may include a menu item
to go up one level in the menu.

Select the appropriate menu item
(page 70).
DVD menuiWhen you display the soft keys again,
parts of the DVD menu may be hidden.

71 Audio
DVD operation
You can also proceed as follows:
Display the soft keys (
page 67).

Press the
Menu
soft key once or several
times.
With each depression of the soft key
you will move up one or several menu
levels (depending on the DVD) until the
topmost level is reached.
Removing DVD menu
A DVD menu or a submenu may include an
item for closing the DVD menu.

Select the appropriate menu item
(page 70).
You can also proceed as follows:

Display the soft keys (
page 67).

Press the
Back
soft key.
or

Press the
Stop
soft key.
DVD playback is stopped and the DVD
menu is opened.
Settings menu
Setting options:
4:3
, 16:9
or
Zoom
soft key:
You can change the aspect ratio
(
page 72).

Lang.
soft key:
You can change the DVD language
(
page 72).

Subtitle
soft key:
You can display and switch between
the subtitles (
page 73).

Angle
soft key:
You can change the camera view
(
page 74).
Activating the Settings menu

Display the soft keys (
page 67).

Press the
Setting
soft key.
The Settings menu will appear.
Settings menu