ECU MERCEDES-BENZ R-CLASS MPV 2008 Owner's Manual

Loading and stowing
184
Cup holder in the centre console
1
Cover
2 Chrome catch
X To open: briefly press chrome catch 2in
the direction of the arrow.
Cover 1swings upwards. 1
Cover
2 To secure the drink container
3 Retainer
4 Release button
5 To release the retainer
X To secure a drink container (driver's
side): place a drink container in the left-
hand cup holder.
X Press release button 4in the direction of
arrow 5.
X Guide retainer 3onto the drink container
in the direction of arrow 2.
X To release a drink container (driver's
side): press release button 4in the direc-
tion of arrow 5.
Retainer 3automatically snaps back into
its original position. X
To close: make sure that there is no drink
container in the cup holder.
X Fold cover 1downwards until it engages.
Cup holder for the 2nd row of seats
below the centre air vents* !
Close the cup holder if you are not using
it and before folding down the 2nd row of
seats.
i Vehicles with a centre console for the 2nd
row of seats* and a short wheelbase do not
have a cup holder below the centre air
vents.
Opening the cup holder 1
Cover Controls
* optional
251_AKB; 5; 7, en-GB
wobuchh,
Version: 2.10.6 2008-05-11T14:51:51+02:00 - Seite 184Dateiname: 6515_1825_02_buchblock.pdf; preflight

Loading and stowing
185
X
Open cover 1and fold it down to the stop
in the direction of the arrow. 1
Cover
2 Cup holder
X Pull cup holder 2out to the stop in the
direction of the arrow.
X Place a drink container in cup holder 2
from above.
Closing the cup holder
X Make sure that there is no drink container
in the cup holder.
X Push cup holder 2forwards into the stow-
age compartment until it engages. X
Fold cover 1upwards until it engages in
the first position.
X Swing cover 1forwards until it engages in
the second position.
Cup holder in front of the armrest of
the 2nd row of seats* 1
Cup holder Cup holder in the side trim of the third
row of seats 1
Cup holder Roof rack system*
G
Risk of accident and injury
An incorrectly secured roof rack, ski rack
or load could become detached from the
vehicle. These objects may be thrown
around and can injure you or others or
cause an accident. Follow the roof rack/ski
rack manufacturer's installation instruc-
tions and special instructions for use.
The roof load raises the vehicle's centre of
gravity, thereby affecting vehicle handling.
You must always observe the maximum Controls
* optional
251_AKB; 5; 7, en-GB
wobuchh,
Version: 2.10.6 2008-05-11T14:51:51+02:00 - Seite 185 ZDateiname: 6515_1825_02_buchblock.pdf; preflight

Loading and stowing
186 roof load of 100 kg. Always adapt your driv-
ing style to the prevailing road, traffic and
weather conditions and drive with particu-
lar care if the roof is laden.
! Mercedes-Benz recommends that you
only use roof rack systems which have
been tested and approved for Mercedes-
Benz vehicles. This helps to prevent dam-
age to the vehicle.
Position the load on the roof rack in such a
way that the vehicle will not sustain dam-
age even when it is in motion.
Depending on the vehicle's equipment,
make sure that you can:
R raise the sliding/tilting sunroof* fully
R open the panorama sliding sunroof* fully
R open the tailgate fully 1
Covers
X Fold covers 1upwards.
X Only secure the roof rack to the anchorage
points under covers 1.
Observe the manufacturer's installation
instructions. Luggage net
G
Risk of injury
Only place lightweight objects in the lug-
gage net. Do not use it to transport heavy,
sharp-edged or fragile objects. The luggage
net cannot secure the objects sufficiently
in the event of an accident.
Luggage net in the front-passenger
footwell 1
Luggage net Controls
* optional
251_AKB; 5; 7, en-GB
wobuchh,
Version: 2.10.6
2008-05-11T14:51:51+02:00 - Seite 186 Dateiname: 6515_1825_02_buchblock.pdf; preflight

Loading and stowing
187
Luggage net behind the front seats
1
Luggage net Loading guidelines
G
Risk of injury
Secure and position the load as described
in the loading guidelines.
Otherwise, vehicle occupants could
be injured by the load being thrown around
in the event of sharp braking, a sudden
change in direction or an accident. This also
applies to seats which have been removed.
You will find further information in the
"Securing a load" section. Even if you follow all the loading guidelines,
the load will increase the risk of injury in the
event of an accident.
G
Risk of poisoning
Keep the tailgate closed when the engine is
running. Otherwise, you could be poisoned
by exhaust fumes entering the vehicle.
The handling characteristics of a laden vehi-
cle are dependent on the distribution of the
load within the vehicle. You should therefore
load your vehicle as shown in the illustrations. Load distribution
Observe the following notes when transport-
ing a load:
R
When transporting a load, never exceed the
maximum permissible gross vehicle weight Controls
251_AKB; 5; 7, en-GB
wobuchh,
Version: 2.10.6 2008-05-11T14:51:51+02:00 - Seite 187 ZDateiname: 6515_1825_02_buchblock.pdf; preflight

Loading and stowing
188or the permissible axle loads for the vehicle
(including occupants).
R Position heavy loads as far forwards and as
low down in the luggage compartment as
possible.
R The load must not protrude above the
upper edge of the backrests.
R Always place the load against the front or
rear seat backrests. Make sure that the
backrests and the seats are securely
locked into place.
R Secure the load with sufficiently strong and
wear-resistant load restraints. Pad sharp
edges for protection.
i Load restraints are available at any quali-
fied specialist workshop, e.g. a Mercedes-
Benz Service Centre. Securing a load
Lashing eyelets* G
Risk of injury
Distribute the load on the lashing eyelets
evenly.
Otherwise, vehicle occupants could be
injured by objects being thrown around if
you:
R brake sharply
R change direction suddenly
R are involved in an accident
Please observe the loading guidelines.
Observe the following points or guidelines
when securing loads:
R Secure the load using the lashing eyelets.
R Do not use elastic straps or nets to secure
a load as these are only intended as an anti-
slip protection for light loads.
R Do not route lashing materials across sharp
edges or corners.
R Pad sharp edges for protection. 2nd row of seats*
There is one lashing eyelet in the footwell
behind the driver’s seat and one in the foot-
well behind the front-passenger seat.
1
Lashing eyelet in the rear footwell Controls
* optional
251_AKB; 5; 7, en-GB
wobuchh,
Version: 2.10.6 2008-05-11T14:51:51+02:00 - Seite 188Dateiname: 6515_1825_02_buchblock.pdf; preflight

Loading and stowing
189
The 3rd row of seats
There is one lashing eyelet in the footwell
behind the seats in the 2nd row. 1
Lashing eyelet in the rear footwell Luggage compartment
There are four lashing eyelets in the luggage
compartment. 1
Lashing eyelets Securing hooks There is a mounting hook on each of the side
panels in the luggage compartment.
1
Securing hooks
Only secure lightweight luggage items (max-
imum 4 kg) on the mounting hooks. Controls
* optional
251_AKB; 5; 7, en-GB
wobuchh,
Version: 2.10.6 2008-05-11T14:51:51+02:00 - Seite 189 ZDateiname: 6515_1825_02_buchblock.pdf; preflight

Loading and stowing
190 Enlarging the luggage compartment
To enlarge the luggage compartment, the rear
bench seats of the 2nd and 3rd rows of seats
can be folded forwards separately. You can
enlarge the luggage compartment partially
(Y page 190) or fully ( Ypage 191). G
Risk of injury
Do not carry heavy or hard objects inside
the vehicle or in the luggage compartment
unless they are secured.
Otherwise, you and other vehicle occu-
pants could be injured by objects being
thrown around the vehicle in the event of
sharp braking, a sudden change in direction
or an accident.
When using the luggage compartment
enlargement feature, you must always fully
fold down the respective backrests and
attach the safety net. G
Risk of poisoning
Always drive with the tailgate closed.
Exhaust fumes could otherwise enter the
vehicle interior.
! If you want to fold the outer seats down
in the 2nd row of seats, the front seats must
not be in the rearmost position. Otherwise, you could damage the front seats and the
2nd row outer seats.
! Close the cup holder* before folding
down the 2nd row of seats. You could oth-
erwise damage the seats or cup holder.
Enlarging the luggage compartment
partially Folding the seats in the 3rd row forwards
X
Move the head restraint of the correspond-
ing seat down fully ( Ypage 83). 1
Backrest release handle
2 Retainer for the seat belt
3 Backrest X
Clamp the seat belt behind retainer 2.
X Pull release handle 1of backrest 3
upwards in the direction of the arrow.
Backrest 3is released.
X Fold backrest 3slowly forwards.
Seat cushion 1is released and moves
automatically to a vertical position. 1
Seat cushion
2 Loop
3 Backrest
i Loop 2can be used to pull the backrests
of the 3rd row of seats upright when the
seats are moved into the original position
(Y page 81). Controls
251_AKB; 5; 7, en-GB
wobuchh,
Version: 2.10.6 2008-05-11T14:51:51+02:00 - Seite 190Dateiname: 6515_1825_02_buchblock.pdf; preflight

Loading and stowing
191
X
Fold backrest 3forwards into a horizontal
position.
Enlarging the luggage compartment
fully G
Risk of injury
Folding down the seats in the 2nd row of
seats, in combination with folding the seats
in the 3rd row of seats, serves the purpose
of fully enlarging the luggage compartment.
Vehicle occupants in the 3rd row of seats
must not use the folded-down seats of the
2nd row of seats as a footrest.
Vehicle occupants in the 3rd row of seats
must not use the folded-down seats of the
2nd row of seats as a table or stowage
space, e. g. for drinks or items of luggage.
Otherwise:
R they could suffer serious or fatal head
injuries
R they or others could be injured by objects
being thrown around:
if you brake suddenly, change direction
abruptly or have an accident. Make absolutely sure that you adhere to the
specified folding order when fully enlarging
the luggage compartment.
Folding the middle seat in the 2nd row of
seats
!
On vehicles with a short wheelbase, the
head restraint must be removed before the
centre seat is folded. You could otherwise
damage the head restraint or the centre
console. X
Fold the centre seat to the armrest position
(Y page 81). Armrest position
1
Seat release loop
2 Seat
X Pull release loop 1in the direction of the
arrow and hold it securely.
The seat is released and folds up.
X Press seat 2further down until the front
of the seat engages in the luggage com-
partment floor position. Controls
251_AKB; 5; 7, en-GB
wobuchh,
Version: 2.10.6 2008-05-11T14:51:51+02:00 - Seite 191 ZDateiname: 6515_1825_02_buchblock.pdf; preflight

Loading and stowing
195Seat locked
1
Lock verification indicator
2 Indicator area
When the seat is locked, locking display 1is
folded in and indicator area 2is barely visi-
ble. Resetting the middle seat in the 2nd row
of seats Armrest position
1
Release loop
2 Seat
X Pull release loop 1of seat 2in the direc-
tion of the arrow and hold it securely.
The seat is released and folds up.
X Press seat 2further down until the back
of the seat engages in the armrest position.
X Pull release loop 1of the backrest in the
direction of the arrow and hold it securely.
X Fold the backrest back until it is heard to
engage in the driving position. Centre console for the 2nd row of
seats*
The centre console contains a stowage com-
partment (Y page 203) and a cup holder
(Y page 183).
If you are using the fully extended luggage
compartment and want an even loading area
(Y page 190), you must remove the centre
console.
Removing the centre console G
Risk of injury
Before removing the centre console, take
out all containers from the centre console
cup holder. Liquids could otherwise spill
onto the passengers and /or the vehicle
interior. Hot liquids could scald passen-
gers. Liquids spilt on the vehicle interior
could damage it.
! To avoid damage to the centre console or
to its components, make sure that the
stowage compartment is closed before
removing the centre console.
i Remove all objects from the stowage
compartment (Y page 203) to reduce the
weight of the centre console. Controls
* optional
251_AKB; 5; 7, en-GB
wobuchh
, Version: 2.10.6 2008-05-11T14:51:51+02:00 - Seite 195 ZDateiname: 6515_1825_02_buchblock.pdf; preflight

Loading and stowing
1961
Centre console
2 Recess
3 Anchoring points
4 Supporting base
5 Release handle
6 Direction of removal
X Pull release handle 5.
The front part of centre console 1
detaches from supporting base 4.
X Lift centre console 1upwards in the direc-
tion of arrow 6and hold centre console
1 in this position.
X At the same time, reach into recess 2.
X Lift centre console 1by recess 2
upwards in the direction of the arrow to release centre console
1from anchoring
points 3.
X Remove centre console 1from the vehi-
cle.
i Supporting base 4cannot be removed.
Fitting the centre console G
Risk of injury
The centre console must be correctly anch-
ored on the supporting base. The centre
console could otherwise become detached
from the supporting base and you and oth-
ers could be injured by the centre console
being thrown around if you:
R brake sharply
R change direction suddenly
R are involved in an accident
You can fit the centre console in two different
positions. In the front position (position 1) on
vehicles with the long wheelbase, you can
enlarge the luggage compartment fully
(Y page 190) without having to remove the
centre console.
i The stowage compartment and cup
holder will only be illuminated if the centre console is fitted in the rear position (posi-
tion 0).
1
Securing ring (position 1)
2 Securing ring (position 0)
3 Supporting base
4 Anchoring point (position 1)
5 Anchoring point (position 0) Controls
251_AKB; 5; 7, en-GB
wobuchh,
Version: 2.10.6
2008-05-11T14:51:51+02:00 - Seite 196 Dateiname: 6515_1825_02_buchblock.pdf; preflight