MERCEDES-BENZ S CLASS 2019 Workshop Manual

#Make surethatthe entire base ofthechildrestraint system alwaysrests onthe sitting surface ofthe seat.
#Never place objects under or behindthechildrestraint system, e.g. cush‐ions.
#Always usechildrestraint systems withthe original cover designedforthem.
#Alwaysreplace damaged coverswithgenuine covers.
&WARNINGRisk of injuryor death fromunsecuredchildrestraint systems inthevehicle
Ifthechildrestraint system is not correctlyinstalled or secured, it couldrelease intheevent of an accident, sudden braking or asuddenchange in direction.
Thechildrestraint system could beflungaround and hitvehicle occupants.
#Always installchildrestraint systemscorrectly,even when not in use.
#Always comply withthechildrestraintsystem manufacturer's installationinstructions.
RAlways observethechildrestraint systemmanufacturer's installation and operatinginstructions aswell asthevehicle-specificinformation:
-InstalltheLATCH-type (ISOFIX)childrestraint system ontherear seat(→page 53).
-Securethechildrestraint system withtheseat belt ontherear seat (→page 56).
-Securethechildrestraint system withtheseat belt onthe front passenger seat(→page 58). Observethe specificinstructionsfortherearward-facing andforward-facingchildrestraint systems(→page57).
Ifthe front passenger seat is occupied,ensure, bothbefore and duringthe jour‐ney,thatthestatus ofthe frontpassenger front airbag is correctforthecurrent situation (→page43).
RObservethewarning labels inthevehicleinterior and onthechildrestraint system.
RAlso secureTopTether if present.
Notesforvehicles with arecliningrear seat
&WARNINGRisk of injuryduetothe seatbackrest beingreclinedtoofar back‐wards
If achildrestraint system is installed andtheseat backrest isreclinedtoofar backwards,the cushionbag may deploybymistakeintheevent of an accident.
#When using achildrestraint system,always ensurethatthe seat is correctlyadjusted andthatthe seat backrest isalmostvertical.
When installing achildrestraint system, movetherecliningrear seat backresttoan almostupright position. Therecliningrear seat backrestmustrestagainstthechildrestraint system.Observethe notes onthe cushion airbag(→page 38).
Occupant safety49

Ifyou install achildrestraint system ontherecliningrear seat, be suretoobservethechildrestraint system manufacturer's installationinstructions.
Do not alterthechildrestraint system
&WARNINGRisk of injuryduetomodifi‐cationstothechildrestraint system
Thechildrestraint system may no longerfunction as it is supposedtoifyou makemodifications or attach objectstoit, e.g.toysor unsuitable accessories. This poses anincreasedrisk of injury!
Never modifythechildrestraint system. Onlyattach accessories whichthe manufacturerofthechildrestraint system has authorizedespeciallyforthischildrestraint system.
Only usechildrestraint systems which are inproperworking condition
&WARNINGRisk of injuryor death causedbythe use of damagedchildrestraintsystems
Childrestraint systems ortheirretaining sys‐temsthat havebeen subjectedtoa load inan accident maythen not be abletoperformtheir intended protective function.
Thechild cannot berestrained intheevent ofan accident, heavy braking or a suddenchange of direction.
#Alwaysreplacechildrestraint systemsimmediatelythat havebeen damaged orinvolved in an accident.
#Havethe securing systemsforthechildrestraint systemschecked at aqualifiedspecialistworkshop before installing achildrestraint system again.
Avoiding direct sunlight
&WARNINGRisk of burns whenthechildseat isexposedtodirect sunlight
Ifthechildrestraint system isexposedtodirect sunlight or heat, parts could heat up.
Children could suffer burns fromthese parts,particularly on metallic parts ofthechildrestraint system.
#Always make surethatthechildrestraint system is notexposedtodirect sunlight.
#Protect it with a blanket,forexample.
#Ifthechildrestraint system has beenexposedtodirect sunlight, allow ittocool before securing achild into it.
#Never leavechildren unattended inthevehicle.
50Occupant safety

Observewhenstopping or parking
&WARNINGRisk of accident and injuryduetochildren and animals left unatten‐ded inthevehicle
Ifyou leavechildren and animals unattendedinthevehicle,theymay be abletosetthevehicle in motion,forexampleby:
RReleasingthe parking brake.
RShiftingthe automatic transmission outof park position].
RStartingthe engine.
In addition,theymay operatevehicle equip‐ment and become trapped.
#Never leavechildren and animals unat‐tended inthevehicle.
#When leavingthevehicle, alwaystakethe SmartKeywithyou and lockthevehicle.
&WARNINGRisk offatal injury duetoexposuretoextreme heat or cold inthevehicle
If people – particularlychildren – areexposedtoextremetemperaturesover an
extended period of time,there is arisk ofserious orevenfatal injury.
#Never leaveanyone – particularlychil‐dren – unattended inthevehicle.
#Never leaveanimals inthevehicle unat‐tended.
Occupant safety51

Overview of suitable seats inthevehiclefor installing achildrestraint system
Securing systemsforchildrestraint systems
Vehicle seat
Left/rightrear seatPreferred securing system:
LATCH-type (ISOFIX)child seat securing sys‐tem
Also secureTopTether if present(→page 55)
Alternative securing system:
RVehicle seat belt
Front passenger seatSecuring system:
RVehicle seat belt
Be suretoobserve:
RIfthe front passenger seat is occupied, ensure,bothbefore and duringthe journey,thatthesta‐tus ofthe front passenger front airbag is correctforthe current situation (→page43).
RNotes on automatic front passenger front airbagshutoff (→page41).
Centerrear seatSecuring system:
RVehicle seat belt
52Occupant safety

Activating/deactivating the seat belt'schildspecial seat beltretractor
&WARNINGRisk of injuryor death if aseat belt is unfastened whilethevehicleis in motion
Ifthe seat belt isreleased whilethevehicle isin motion,thechildrestraint system is nolonger correctly secured. Thechild seatsafetyfeature is deactivated andthe seatbelt is drawn in a bitbythe inertiareel.
It istherefore not possibletoengagethe seatbelt again.
#Pullover andstopthevehicle safely assoon as possible, paying attentiontoroad and traffic conditions.
#Activatethechild seat safetyfeatureagain and correctly securethechildrestraint system.
When enabled,the special seat beltretractorensuresthatthe seat belts ofthe frontpassenger seat andrear seats do not slackenoncethechildrestraint system is secured.
The seat belts onthefollowing seats are equip‐ped with a special seat beltretractor:
RFront passenger seat
RRear seats
#Toinstall achildrestraint system:wheninstalling achildrestraint system, alwaysobservethe manufacturer's installation andoperating instructions aswell asthe informa‐tion inthis Operator's Manual.#Pullthe seat belt smoothly fromthe seat beltoutlet.
#Engagethe seat belttongue inthe seat beltbuckle.#Toactivatethe special seat beltretrac‐tor:pullthe seat belt out fully and lettheinertiareelretract it again.Whenthe special seat beltretractor is activa‐ted,you should hear aratcheting sound.
#Pushthechildrestraint system down untilthe seat belt sits tightly.#Todeactivate the special seat beltretrac‐tor:presstherelease button ofthe seat beltbuckle.
#Holdthe seat belttongue and guide backtothe seat belt outlet.
InstallingtheLATCH-type (ISOFIX)childrestraint system ontherear seat
InstallingtheLATCH-type (ISOFIX)childrestraint system ontherear seat
&WARNINGRisk of injuryor death ifthepermissible gross mass ofthechild andchildrestraint system isexceeded
ForLATCH-type (ISOFIX)childrestraint sys‐tems in whichthechild is secured usingtheintegrated seat belt inthechildrestraint sys‐tem,the permissible gross mass ofthechildandchildrestraint system is73lb (33kg).
Ifthechild andthechildrestraint systemtogetherweigh morethan73lb (33kg),theLATCH-type (ISOFIX)childrestraint systemwith integrated seat belt does not offer suffi‐cient protection. Anexcessive load may beplaced ontheLATCH-type (ISOFIX)child seatattachments andthechild may not be
Occupant safety53

restrained intheevent of an accident,forexample.
#Ifthechild andthechildrestraint sys‐temtogetherweigh morethan73lb(33kg), useonly aLATCH-type (ISOFIX)childrestraint systemthat securesthechild withthevehicle seat belt.
#Also securethechildrestraint systemwiththeTopTether belt, ifavailable.
Always comply withthe information aboutthemass ofthechildrestraint system:
Rinthe manufacturer's installation and operat‐ing instructionsforthechildrestraint systemused
Ron a label onthechildrestraint system, ifpresent
Regularlycheckthatthe permissible gross massofthechild andchildrestraint system isstillcomplied with.
Whenyou are installing achildrestraint system,observethefollowing:
sAlways observethe correct use andthe suit‐ability ofthe seatsfor attaching achildrestraint system.
sAlways comply withthe manufacturer'sinstallation and operating instructionsforthechildrestraint system used.
sMake surethatthechild'sfeetdo nottouchthe front seat. If necessary,movethe frontseatforward slightly.
Whenyou are installing aLATCH-type(ISOFIX)childrestraint system, observethefol‐lowing:
sWhenyou are using a Group 0/0+ babycar seat and a Group 1rearward-facingchildrestraint system on arear seat:adjustthe front seat sothatthe seat doesnottouchthechildrestraint system.
sWhenyou are using a Group 1forward-facingchildrestraint system:removetheheadrestraint fromtherespective seat, if
possible. In addition,the seat backrest ofthechildrestraint system must, asfar aspossible, lieflat againstthe backrest ofthevehicle seat.
Afterthechildrestraint system has beenremoved,replacethe headrestraints againimmediately and adjustthem correctly.
sFor certainchildrestraint systems inweightgroup 2 or 3,there may berestrictions inthe maximum size setting, e.g. duetopossi‐ble contact with theroof.
sThechildrestraint system must not beten‐sioned betweentheroof andthe seat cush‐ion and/or be installedfacingthe wrongdirection. Where possible, adjustthe seatcushion inclination accordingly.
sThechildrestraint system must not be putunderstrainbythe headrestraints.Adjustthe headrestraints accordingly.
54Occupant safety

Beforeevery trip, make surethattheLATCH-type(ISOFIX)childrestraint system is engaged cor‐rectly in bothmounting brackets inthevehicle.
*NOTEBe careful nottodamagethe seatbeltforthe center seat when installingthechildrestraint system
#Make surethatthe seat belt is not trap‐ped.
#Vehicles withrecliningrear seats:Movetherecliningrear seat backrest down slightlybeforetheLATCH-type (ISOFIX)childrestraint system is installed.
#Removethe upholstered lining1.
#Vehicles withoutrecliningrear seats:Foldupholstered lining1upwards.
#Turnthe support ontherear side of uphol‐stered lining1by90°.The upholstered lining1willremainfoldedupwards.
#AttachtheLATCH-type (ISOFIX)childrestraint systemtobothmounting brackets2inthevehicle.
#Vehicles withrecliningrear seats:Returntherecliningrear seat backresttoan uprightposition.Therecliningrear seat backrest mustrestagainstthechildrestraint system.
SecuringTopTether
&WARNINGRisk of injuryor death whenadjustingthe seat after installing achildrestraint system
Vehicles with electrically adjustablerearseats:
Ifyou adjustthe seat after installing achildrestraint system,thefollowing may occur:
Rthe seat belt may either sittoo loose ortoo tight
Rthechildrestraint system can becomeloose, incorrectly positioned or damaged
As aresult,thechildrestraint system maynot be abletoprovidethe intended level ofprotection.
#Never adjustthe seat after installingthechildrestraint system.
Ifthechildrestraint system is equippedwith aTopTether belt:
Therisk of injury can bereducedbyTo pTether. TheTopTether beltfacilitates an
Occupant safety55

additional connection betweenthechildrestraint system attached withLATCH-type (ISOFIX) andthevehicle.
#If necessary,moveheadrestraint1upwards (→page107).
#Fold up cover2ofTopTether anchorage3.
#InstalltheLATCH-type (ISOFIX)childrestraintsystem withTopTether. Always comply withthechildrestraint system manufacturer'sinstallation instructions when doing so.
#GuideTopTether belt4under headrestraint1betweenthe two headrestraintbars.
#HookTopTether hook5ofTopTether belt4without twisting intoTopTether anchor‐age3.
#TensionTopTether belt4. Always complywiththechildrestraint system manufactur‐er's installation instructions when doing so.
#Fold down cover2ofTopTether anchorage3.
#If necessary,slide headrestraint1down‐wards (→page107). Make surethatyou donot interferewiththe correctrouting ofTo pTether belt4.
Securingthechildrestraint system withtheseat belt
Securingthechildrestraint system withtheseat belt ontherear seat
When installing a belt-securedchildrestraintsystem, observethefollowing:
sAlways comply withthe manufacturer'sinstallation and operating instructionsforthechildrestraint system used.
sWhen using a category 0/0+ baby carseat and a category Irearward-facingchildrestraint system on arear seat:adjustthe front seat sothatthe seat doesnottouchthechildrestraint system.
sWhen using a category Iforward-facingchildrestraint system:removethe head
56Occupant safety

restraint fromtherespective seat, if possi‐ble.
Afterremovingthechildrestraint system,replacethe headrestraints again immedi‐ately and adjustthem correctly.
sThe backrestoftheforward-facingchildrestraint system must, asfar as possible, beresting onthe seat backrest oftherearseat.
sFor certainchildrestraint systems inweightcategory II or III,there may berestrictions inthe maximum size setting, e.g. duetopossi‐ble contact with theroof.
sThechildrestraint system must not be putunderstrain betweentheroof andthe seatcushion and/or be installedfacingthewrong direction. Where possible, adjusttheseat cushion inclination accordingly.
sThechildrestraint system must not be putunderstrainbythe headrestraints.Adjustthe headrestraints accordingly.
sMake surethatthechild'sfeetdo nottouchthe front seat. If necessary,movethe frontseatforward slightly.
The seat belts onthefollowing seats are equip‐ped with a special seat beltretractor:
RFront passenger seat
RRear seats
Vehicles with seat belt buckleextenders:when securing achild in achildrestraint systemon arear seat, observethefollowing notes:
RMake surethatthe seat belt isfastened onthechildrestraint system accordingtothemanufacturer's installation instructionsforthechildrestraint system.
RForchildrestraint systems with a belt clamp:engagethe seat belttongue intothe seat beltbuckle beforeyou tightenthe seat belt usingthe belt clamp.
When enabled,the special seat beltretractorensuresthatthe seat belts ofthe frontpassenger seat andrear seats do not slackenoncethechildrestraint system is secured(→page 53).
#Installthechildrestraint system.The entire base ofthechildrestraint systemmust alwaysrestonthe sitting surface oftherear seat.
#Always make surethatthe shoulder beltstrap is correctlyrouted fromthe seat beltoutlet ofthevehicletothe shoulder beltguide onthechildrestraint system.The shoulder beltstrap must beroutedfor‐wards and downwards fromthe seat belt out‐let.
Notes onrearward-facing andforward-facingchildrestraint systems onthe frontpassenger seat
&WARNINGRisk of injuryor death fromusing arearward-facingchildrestraintsystem whenthe front passenger frontairbag is enabled
Ifyou secure achild in arearward-facingchildrestraint system onthe front passengerseat andthePASSENGER AIRBAG OFF indi‐cator lamp is off,the front passenger airbagcan deploy intheevent of an accident.
Occupant safety57

Thechild could bestruckbythe airbag.
Always ensurethatthe front passenger air‐bag is deactivated. ThePASSENGER AIRBAGOFF indicator lamp must be lit.
NEVER use arearward-facingchildrestraintsystem on a seat protectedbyan ENABLEDFRONT AIRBAGin front of it, DEATH or SERI‐OUS INJURYtotheCHILD can occur.
Observethe specific instructionsfortherear‐ward-facing andforward-facingchildrestraintsystems (→page 58).
Warning notice onthe front passenger sun visor
Always observethestatus ofthe front passengerfront airbag onthePASSENGER AIRBAG OFFindicator lamp:
RWhen using arearward-facingchildrestraintsystem onthe front passenger seat,the frontpassenger front airbag must always be disa‐bled. This is onlythe case ifthePASSENGERAIRBAG OFF indicator lamp is lit continu‐ously (→page 43).
RIfthePASSENGER AIRBAG OFF indicatorlamp is off,the front passenger front airbagis enabled. The front passenger front airbagmay deploy during an accident.
Securingthechildrestraint system withtheseat belt onthe front passenger seat
When installing a belt-securedchildrestraintsystem onthe front passenger seat, alwaysobservethefollowing:
sObservethechildrestraint system manufac‐turer's installation and operating instruc‐tions.
sWhen using aforward-facingchildrestraintsystem in Group I:removethe headrestraint fromtherespective seat, if possi‐ble.
Whenyouremovethechildrestraint sys‐tem, installthe headrestraint again immedi‐ately and adjust allthe headrestraints cor‐rectly.
sThe backrest oftheforward-facingchildrestraint system must lie asflat as possible
againstthe backrest ofthe front passengerseat.
sFor certainchildrestraint systems inweightgroup II or III,there may berestrictions inthe maximum size setting, e.g. duetopossi‐ble contact with theroof.
sThechildrestraint system must not be putunderstrain betweentheroof andthe seatcushion and/or be installedfacingthewrong direction.Adjustthe seat backrestinclination accordingly.
sThechildrestraint system must not be putunderstrainbythe headrestraints.Adjustthe headrestraints accordingly.
sNever place objects under or behindthechildrestraint system, e.g. cushions.
The seat belt onthe front passenger side isequipped with a special seatbeltretractor.
When activated,the special seatbeltretractorensuresthatthe seat belt does not slacken oncethechildrestraint system is secured(→page 53).
58Occupant safety