navigation MERCEDES-BENZ SL-Class 2004 R230 Comand Manual

215
Info Services*/System settings
System settings
Adopting settings
Press the right-hand rotary/push-
button v longer than 2 seconds.
The main system setting menu will ap-
pear.
or

Press *.
The “Date/Time” menu will appear.
1Acknowledgement beep
2Info beep
P Tone is switched on
Q Tone is switched off

Turn the right-hand rotary/push-button
v to highlight “Beeps” in the settings
menu and press to confirm.
The “Beeps” menu will appear.

Turn the right-hand rotary/push-button
v to highlight 1 or 2 and press to
confirm.
The beep selected is switched on or off
accordingly.
Acknowledgement beep
You will hear this beep if you confirm a
function or select an entry.
Info beep
You will hear this beep if COMAND pro-
vides information, e.g. navigation turn
is approaching.
Switching beep tones on and off

221 Glossary
Audio source
This includes the systems radio and CD
(CD drive in the control unit and CD
changer) as well as an external source,
e.g. tape player.
COMAND
(Co
ckpit Man
agement and D
ata Sys-
tem)
Information and operating center for
vehicle sound and communications
systems, including the radio and CD
player, as well as for other optional
equipment (CD changer, telephone,
etc.).
Emergency call
This function places a call to a local
9-1-1 provider. It does not initiate a
->Tele Aid* call. Please note that the
9-1-1 emergency call system is a public
service. Using it without due cause is a
criminal offense.GPS
(G
lobal P
ositioning S
ystem)
Satellite-based system for relaying
geographic location information to and
from vehicles equipped with special re-
ceivers. Employs CD digital maps for
navigation.
Heading-up
The map is displayed facing driving di-
rection pointing up during route
guidance.
Info Services*
With this function you can request in-
formation on news, weather, stocks,
sports and reminders. Info Services is
an additional optional feature to basic
Tele Aid service. Tele Aid can be initial-
ly activated by completing a subscriber
agreement and placing an acquain-
tance call. Mix
Display representation during destina-
tion guidance. The symbol display is ac-
tivated automatically from the map
display before a turn-off. After you have
made the turn, the map will appear
again.
Multifunction display
Two displays in the combination instru-
ment that show important information
about the COMAND systems radio, CD
and telephone. The displays can be
called up using the control buttons on
the multifunction steering wheel.
Navigation CD
Contains all the destination addresses
(town, road, intersection, house num-
ber, special destinations) and the digi-
tal map material for a country or a
region for destination entry, route cal-
culation and destination guidance.

222 GlossaryNorth-up
The map is displayed facing due north
during route guidance.
Provider
is the network operator who makes
available (provides) telephone services
Roaming
For this function, the telephone uses
the telephone network of a contract
partner. There are home type and non
home type systems. The RM indicator
in the COMAND display indicates that a
call is being made using a non-home
type system.
Service numbers
includes a personal service number
and the number for Roadside Assis-
tance
Service source
This includes the systems telephone,
navigation (voice output during desti-
nation guidance) and ->Voice control
system*SMS
(S
hort M
essage S
ervice)
With this function you can receive, read
and delete short text messages (if SMS
service is provided by your carrier)
Tele Aid*
(Tele
matic A
larm I
dentification on D
e-
mand)
The Tele Aid system consists of three
types of response: automatic and ma-
nual emergency, Roadside Assistance,
and information. Tele Aid is initially ac-
tivated by completing a subscriber
agreement and placing an acquain-
tance call.
The Tele Aid system is operational pro-
vided that the vehicle's battery is char-
ged, properly connected, not damaged,
and cellular and GPS coverage is avai-
lable.Unlock code
Your unlock code prevents unauthori-
zed persons from using your telephone.
The unlock code is a number string,
which you have to enter on switching
on the telephone.
Voice output
During a trip, apart from visual informa-
tions (symbol or map displays),
COMAND also provides all of the
necessary spoken route information
via voice output.
Voice control system*
One of the service sources of
COMAND.
As voice-operated control system, it
controls the COMAND systems via
voice. Refer to the separate operating
instructions.

223 Index
A
Adjust
Sound 63
for audio sources 63
for service sources 64
Sound-center 65
Volume difference 64
Adjusting the volume 14
Amplifier 66
Arrow indicating the direction to the
destination 161
Audio sources 63
Auxiliary audio source 218
connecting 218
B
Beeps 215
Acknowledgement beep 215
Info beep 215
C
Calibration 199CD operation
CD track scan 55
Fast forward/backward 54
Naming CD 55
Deleting a CD name 57
Playback mode 58
Selecting a CD 53
Track select 51
Changing the navigation CD 45, 137
COMAND control unit 6
Cross hairs 150
moving 150
Current vehicle location 150
D
Date and time 208
AM 214
automatic time conversion 212
automatically setting 208
manually setting 213
PM 214
selecting country and time zone 211selecting time format 214
setting the time in 30 minute
steps 209
Day and night display 22, 216
Destination
confirming on the map 152
Destination address 141
Points of Interest 155
requesting 165
saving 193
selecting the last destinations 159
selecting via the map 149
Destination and route information 165
Location map 167
Route list 166
Route map 169
Stop-over (way point) 169
Destination flag 188
Destination memory
deleting a destination 197
sorting 196

224 IndexDetour
calculating 182
Traffic jam ahead 182
Dialing
from calls list 112
Redial 109
Speed dialing 113
Subsequent dialing 102
Dialing operation 101
Distance bar 163
E
Emergency call 124
entering emergency call number 125
initiating 125
Ending a call
at the COMAND control unit 99
at the multifunctional steering
wheel 97
Enter
Unlock code 96Entering
House number 147
Intersection 146
Vehicle location 198
Error messages
CD operation 60
F
Factory settings
reset 217
Fault messages
during preparation of navigation
startup 140
G
GPS 132
GPS time 209
I
Important notes
Navigation 130
Telephone 86Incoming call 97
accepting at the COMAND control
unit 98
accepting at the multifunctional stee-
ring wheel 97
refusing a call 99
L
Language
selecting 207
Latitude 153
List
Country list 211
Route list
detailed route list 184
route list 183
Loading
CD drive with an audio CD 45
CDs in the changer 46
Longitude 153

226 Index
“Error” 61
“Loading CD ...” 50
“Manual route exclusions have been
reset” 187
“Navigation cannot be activated. An er-
ror has occurred” 140
“NEW ROUTE” 163
“No CD available. Please insert NAVI-
CD type DX only” 140
“No CD changer” 60
“No CD” 60
“No magazine” 60
“NO ROUTE” 163
“No telephone” 87
“OFF ROAD” 163
“Personal service number” 126
“Reading error” 61
“Roadside Assistance” 126
“SMS loading...” 121
“Telephone defective” 87“Telephone is being activated. Please
wait.” 87
“Temperature is too high” 61
“The route list is being
calculated” 183
“Voice output is muted” 171
CALL 97
Mix 175
Multifunction display 11
CD operation 62
Radio operation 40
Telephone mode 89
Display overview 90
Muting 28, 75
CD playback 60
N
Notebook 115
O
Outgoing calls 100P
Phone book 116
adding an entry 119
changing entries 116
deleting an entry 119
Phone number
begin dialing 101
correcting 101
interrupt dialing 101
Points of Interest
entering 155
Q
Quick reference
CD operation 42
Navigation 134
Radio operation 24
Quick reference COMAND 12
R
Radio station
automatically saving 36

228 IndexSpeed dialing (only with COMAND) 113
Station
Radio station
Automatic station scan 33
Manual tuning 31
Seek tuning 30
selecting 30
Station selection via direct frequen-
cy entry 32
Station selection via number key-
pad (presets) 32
Station frequency 28
Storing
in the phone book 120
Notebook input 115
Street list 145
Switch on
Radio operation 28
Switching another system on
CD mode 28
Radio operation 50Switching off
Beeps 215
COMAND control unit 13
Mix 175
Telephone mode 97
Switching on
Auxiliary audio source 218
Beeps 215
CD operation 15, 50
COMAND control unit 12
Mix 175
Navigation 140
Navigation system 18
Radio operation 14
Telephon operation 17
Telephone mode 96
Symbol display 162
T
Travelling abroad 132V
Voice output
“Bear left after 250 feet” 173
“Please bear left” 173
“Please, make the next right
turn” 161
“Prepare to turn right” 172
“The route is being calculated” 160
“The route to your intermediate desti-
nation is being calculated” 179
“Turn right after 250 feet” 172
W
Way point
deleting 180