MITSUBISHI ASX 2019 Owner's Manual (in English)

NOTEzWhen connecting a USB device, use a con-
nection cable. Failure to use a connection ca-
ble when connecting may place undue load
on, or damage the USB connector.
z Set up the device in order that no unsafe ac-
tions, such as plugging in the connection ca-ble are taken while driving.
z When inserting and removing the USB de-
vice, for safety

Play tracks in the folder currently being
played in a random order.NOTEz Pressing again will cancel.
z Even if the file is selected, folder random
playback will not be cancelled.
All Folder Random Playback
Hold down the 2RDM key.

Play the tracks in all folders in a random or-
der.
NOTEz Pressing again will cancel.
z Even if the file is selected, all folder random
playback will not be cancelled.
Scan Playback (SCAN)
Press the PTY/SCAN key.

Play the first 10 seconds of each of the tracks
on the whole USB device in order.
NOTEz Press this button again during playback if
you wish to hear that track, and that trackwill play normally.
Folder Scan Playback
Hold down the PTY/SCAN key.

Play the first 10 seconds of the first track in
each folder on the USB device in order.
NOTEz Press this button again during playback if
you wish to hear that track, and that trackwill play normally.
Search Tracks
Search folders and files, and select a track.
1. Turn the
/SEL key to select the folder.
2. Press the
/SEL key.

Files within the selected folder are dis- played.
3. Turn the
/SEL key to select the file.
4. Press the
/SEL key.

This plays the selected file (track).
NOTEz While the folder is selected, press the 6 key to cancel track search mode.
z If there is no operation for 10 seconds after
selecting the folder, then track search mode will be cancelled.
z Select the folder, and hold down the
/SEL
key to start playback from the first track in
that folder.
z While the file is selected, press the 6
key
to return to the previous operation.
z While the file is selected, hold down the 6
key to cancel track search mode.
z If there is no operation for five seconds after
selecting the file, that file is played back.
z Operations such as selecting a track will
cancel track search mode.
To play iPod/USB memory
device tracks via voice
operation (vehicles with
Bluetooth

The following explains how to prepare forvoice operation and play the tracks.Preparation for voice operation
To use the voice operation, press the
SPEECH button (A) first.
To search by artist name
1. Say “Play” on the main menu.
NOTEz The Bluetooth

NOTEzIf you say “Album <title>,” you can skip
step 3.
3. After the voice guide says “What Album
would you like to play?” say the album title.
4. If there is only one match, the system
proceeds to step 6.
5. If there are two or more matches, the
voice guide will say “More than one
match was found, would you like to play <album title>?” If you say “Yes,” thesystem proceeds to step 6.
If you say “No,” the next matching al-
bum is uttered by the system.
NOTEz If you say “No” to three or all album titles
uttered by the system, the voice guide will say “Album not found, please try again” and
the system returns to step 2.
6. After the voice guide says “Playing <al-
bum title>,” the system creates a playlist index for the album title.
NOTEz If the confirmation function is active, the
voice guide confirms if the album title is
correct. If the album title is correct, say
“Yes”. If not, say “No”. After the voice guide says “Album not found, please try
again,” the system returns to step 2.
7. The system exits the voice recognition
mode and starts playback.
To search by playlist
1. Say “Play” on the main menu.
NOTEz The Bluetooth

NOTEzIf the confirmation function is active, the
voice guide confirms if the playlist name is
correct. If the playlist name is correct, say
“Yes”. If not, say “No”. After the voice guide says “Playlist not found, please try
again,” the system returns to step 2. Refer to “Confirmation function setting” on page 7-49.
7. The system exits the voice recognition
mode and starts playback.
To search by genre
1. Say “Play” on the main menu.
NOTEz The Bluetooth

NOTEzDepending on the type of Bluetooth-capable
audio devices, volume levels may differ. There is the danger of loud volumes, so prior
to use, it is recommended that you turn the volume down.

W “Adjust Volume” on page 7-20
z Depending on the status of the Bluetooth au-
dio device, it may take some time until the device is recognized, or playback starts.
z Bluetooth audio device specifications and
settings may mean that connection is not possible, or result in differences in operationor display.
z Depending on audio data in the Bluetooth
audio device, track information may not be
displayed correctly.
z Depending on the status of the vehicle and
device, the iPod/iPhone may not play back after starting the engine.
Connect a Bluetooth-capable
Audio Device
Regarding how to connect your Bluetooth de-
vice, refer to “Connecting the Bluetooth

NOTEzPressing again will cancel.
Scan Playback (SCAN)
Press the PTY/SCAN key.

Play the first 10 seconds of each of the tracks
on the whole Bluetooth Audio device in or- der.
NOTEz Press this button again during playback if
you wish to hear that track, and that trackwill play normally.
Listening to Bluetooth Audio*
7-372*$((For pleasant driving7

Display Indicator
This explains content of the display indicator.

Change the Display Mode
You can change the content of the display in-
dicator.
Press the DISP key to switch the display con- tent.

Each time the DISP key is pressed, the dis- play content changes.
CAUT,ONz The operation of changing display contents
may impede safe driving, therefore check safety before operation.NOTEz Up to 11 characters may be displayed at one
time. To display 12 or more characters, press
the PAGE key, and subsequent characters
will be displayed.During DAB Reception*
This switches in the order “Service name”,
“Ensemble name”, and “CH no. (CH ID)”.
NOTEz If the text information for the service name
and ensemble name cannot be obtained, then
nothing is displayed.
Display Indicator
7-382*$((For pleasant driving7

During CD-DA playback
This switches in the order “Disc title”, “Track
title”, and “Operating status”.
NOTEz If there is no text information to display,
then “NO TITLE” is displayed.
During MP3/WMA/AAC Play-
back
This switches in the order “Folder title”,
“File title”, and “Operating status”.
NOTEz If there is no text information to display,
then “NO TITLE” is displayed.
Display the ID3tag
Hold down the DISP key.

This switches the ID3tag display.
[DISP@ Each time the key is pressed, this
switches in the order “Album name”, “Track name”, “Artist name”, “Genre name”*, and “Operating status”.

*: Displayed when playing back audio files
on a USB device (vehicles with a Bluetooth

Ad-
just-
ment
items
Turn counter-
clockwiseTurn clockwise
SCVOFF, LOW
(Low speed com- pensated volume
effect)MID, HIGH
(High speed com- pensated volume
effect)System settings
Change system settings such as product time. 1. Press the MENU key.
2. Press the
/SEL key to select settings
items.
Each time the
/SEL key is pressed,
this switches in the order DAB settings,
Gracenote DB, AF, REG, TP-S, PI-S,
PTY language setting, PHONE settings, CT, Adjust time and cancel.
3. Turn the
/SEL key to set.
4. Press the
/SEL key to determine
This completes settings, and displays the next
settings item.
*:Displayed when playing back audio
files (vehicles with Bluetooth