MITSUBISHI ASX 2019 Owner's Manual (in English)

Set-
tings
nameSettings ValueSettings contentTP-S OFFDo not automati-
cally search for
traffic messages
(TP stations).PI-SPI-S ONSearch for the
same station or
local station in
that registered in
the preset chan-
nel.PI-S OFFDo not search
for the same sta-
tion or local sta-
tion for that reg-
istered in the
preset channelPTYENGLISHSet the display
language for the
program content
search (PTY
search) to Eng-
lish.Set-
tings
nameSettings ValueSettings contentFRANdAISSet the display
language for the
program content
search (PTY
search) to
French.DEUTSCHSet the display
language for the
program content
search (PTY
search) to Ger-
man.SVENSKSet the display
language for the
program content
search (PTY
search) to Swed-
ish.ESPAfOLSet the display
language for the
program content
search (PTY
search) to Span-
ish.Set-
tings
nameSettings ValueSettings contentITALIANOSet the display
language for the
program content
search (PTY
search) to Ital-
ian.CTCT ONUpdate the time
if time data is re-
ceived.CT OFFDo not update
the time even if
time data is re-
ceived.
*: It is necessary to press the [TP@ key and
turn traffic message standby mode “ON”.
Time Setting
Turning the RDS setting CT setting “CT OFF” enables manual setting of the time. 1. Select “YES” at the “Adjust time”
screen, and press the
/SEL key.
The hour can be adjusted. Press the
/SEL key again to adjust the minutes.
2. Turn the
/key to adjust the time.
3. Press the
/SEL key.
This completes the adjustment.
System settings
7-412*$((For pleasant driving7

NOTEzIn order to finish adjusting the time, hold
down the /SEL key until the seconds are
reset to “00”.
PHONE Settings
Change the mobile phone voice cut-in set-
tings and the Bluetooth

Set-
tings
nameSettings valueSettings contentPHONE IN-LDuring mobile
phone voice cut- in, output sound from the leftfront speaker.HFM voice lan-
guage
settingsENGLISHChange the hands free module voice
language.FRENCHGERMANSPANISHITALIANDUTCHPORTUGUESERUSSIANNOTEz Depending on the vehicle model, this may
not display.
Gracenote DB (Vehicles with a
Bluetooth

Troubleshooting
Please check these items if a message appears on the display, or if you think something is not working properly.If This Message Appears...
A message is displayed on this product according to the situation.
ModeMessageCauseResponseCDCHECK DISCThe disc is inserted upside down.Insert with the label side up.The disc has condensation on it.Wait a while before inserting again.DISC ERRORThe disc is damaged.Clean the read surface of the disc.The disc is dirty.INTERNAL EThe drive has malfunctioned for some reason.Check that there is no problem with the disc, and insert
the disc again. If the problem persists, consult a
MITSUBISHI MOTORS Authorized Service Point.HEAT ERRORThe temperature inside the product is high.Remove the disc, and wait for the internal temperature
to return to normal.USBFILE ERRORFiles that cannot be played are selected.Select files that can be played.

W “Audio Files (MP3/WMA/AAC)” on page 7-15USB BUS PWRThere is high or low electrical current or voltage.Turn the power OFF and wait a short while. If the prob-
lem persists, consult a MITSUBISHI MOTORS Author- ized Service Point.LSI ERRORThere is an internal malfunction for some reason.UNSUPPORTED FORMATUnsupported audio files have been played.Confirm audio files that can be played.
W “Audio Files (MP3/WMA/AAC)” on page 7-15UNSUPPORTED DEVICEAn unsupported USB device has been connected.Please connect a USB memory device.iPodNO SONGAn iPod/iPhone not containing any tracks has been
connected.Connect an iPod/iPhone containing tracks.
Troubleshooting
7-442*$((For pleasant driving7

ModeMessageCauseResponseVER ERRORThis iPod/iPhone software version is not supported.Please change to a supported software version.OtherERROR DCAn abnormal direct voltage has been sent to the speak-
ers.Turn the power OFF and wait a short while. If the prob-
lem persists, consult a MITSUBISHI MOTORS Au- thorized Service Point.If You Think Something Is Not Working Properly...
Here is a list of symptoms, causes and responses if you think something is not working properly.
SymptomsCauseResponseThere is no sound or quiet
soundThe volume is turned to its minimum.Adjust the volume.

W “Adjust Volume” on page 7-20The balance or fader is turned to one side.Adjust the balance or fader.

W “Adjust Audio Quality and Volume Balance” on page 7-39The disc cannot be inserted.A disc is already in the product.Eject the disc.

W “Insert/Eject Discs” on page 7-20There is no disc in the product, but the product says it is
loading.Press the eject button once.

W “Insert/Eject Discs” on page 7-20The disc cannot be played.The disc is inserted upside down.Insert with the label side up.The disc has condensation on it.Wait a while before inserting.The disc is dirty.Clean the read surface of the disc.The sound skips in the
same place.The disc is damaged or dirty.Check the disc.There is no sound, even if
the disc is inserted.Damage to or dirt on the disc means that its data cannot be read.Check the disc. Additionally, if using CD-R/RW discs,
their characteristics may render them unable to be played.

Troubleshooting
7-452*$((For pleasant driving7

Link System*
The Link System takes overall control of the devices connected via the USB input terminal
or the Bluetooth

NOTEzIf the ignition switch or the operation mode
is left in ACC, the accessory power will au- tomatically turn off after a certain period of
time and you will no longer be able to use
the Bluetooth

PICK-UP button
zPress this button when an incoming call
is received to answer the telephone.
z When another call is received during a
call, press this button to put the first call- er on hold and talk to the new caller.

4.The voice guide will say “Select a lan-
guage: English, French, Spanish, Italian,
German, Dutch, Portuguese or Russian” Say the desired language. (Example: Say“English.”)
5. The voice guide will say “English
(French, Spanish, Italian, German, Dutch, Portuguese or Russian) selected.Is this correct?” Say “Yes.”
Answer “No” to return to Step 4.NOTEz The voice guide will repeat the same mes-
sage twice. The first message is in the cur-rent language, and the second message is inthe selected language.
z If many entries are registered in the vehicle
phone book, changing the language will take longer.
z Changing the language deletes the mobile
phone book imported to the Bluetooth

4.The voice guide will say “Password is
disabled. Would you like to enable it?”
Answer “Yes.”
Answer “No” to cancel the setting of the
password and return to the main menu.
5. The voice guide will say “Please say a 4-
digit password. Remember this pass-
word. It will be required to use this sys-
tem”.
Say a 4-digit number which you want to set as a password.
6. For confirmation purposes, the voice
guide will say “Password <4-digit pass-
word>. Is this correct?” Answer “Yes.”
Answer “No” to return to the password input in Step 5.
7. When the registration of the password is
completed, the voice guide will say “Password is enabled” and the systemwill return to the main menu.NOTEz Password will be required to access the sys-
tem after the next ignition cycle.NOTEz It is required for a little time after engine
stop that the entered password is actually re-corded in the system.
If the ignition switch or the operation mode is made to ACC or ON or the engine is star-ted immediately after engine stop, there is a
case when the entered password is not recor- ded in the system. At this time, please try to
enter the password again.
Entering the password
If a password has been set and the security
function is enabled, the voice guide will say “Hands-free system is locked. State the pass-word to continue” when the SPEECH button
is pressed to enter voice recognition mode.
Say the 4-digit password number to enter the
password.
If the entered password is wrong, the voice
guide will say “<4- digit password>, Incor-
rect password. Please try again”. Enter the correct password.
NOTEz You can re-enter the password as many
times as you want.
z If you have forgotten your password, say
“Cancel” to quit the voice input mode and then check with a MITSUBISHI MOTORS
Authorized Service Point.Disabling the password
Use the following procedure to turn off the
security function by disabling the password.
NOTEz System must be unlocked to disable the
password.
1. Press the SPEECH button.
2. Say “Setup”.
3. Say “Password.”
4. The voice guide will say “Password is
enabled. Would you like to disable it?”
Answer “Yes.”
Answer “No” to cancel the disabling of
the password and return to the main menu.
5. When the disabling of the password is
completed, the voice guide will say “Password is disabled” and the system
will return to the main menu.
Speaker enrollment function
The Bluetooth