MITSUBISHI iMiEV 2012 1.G Owners Manual
Page 161 of 442
3-12 Features and controls
3Door locks
N00509200534
To lock or unlock the door with the keyTurn the key toward the front of the vehicle to lock the door.
After checking that the door is locked, turn the key back to the
center and remove it.
WA R N I N G
!Make sure all doors are tightly closed and locked
while driving.
• Locked doors, in combination with the use of seat
belts, can help reduce the risk of ejection in an
accident.
• Locked doors can help keep passengers, especially
small children, from opening doors and falling out
of moving vehicles.
• Locked doors can help prevent outsiders from
gaining access to your vehicle when you slow down
or come to a stop.
Lock your vehicle whenever you leave it. Children
who get into unlocked vehicles may not be able to
get out. Children trapped inside vehicles can quickly
be overcome by heat and suffer serious injury or
death due to heat stroke.Never leave children unattended inside a vehicle. In
addition to the risk of heat stroke, children can acti-
vate switches and controls, resulting in an injury or
fatal accident.
1- Insert or remove the key
2- Lock
3- Unlock
BK0140800US.book 12 ページ 2011年9月29日 木曜日 午後3時28分
Page 162 of 442
Features and controls
3-13
3
To lock or unlock the door from the inside Move the lock knob to the lock position to lock the door.
All doors should be kept locked while driving.
The driver’s door can be unlocked without using the lock knob
by pulling on the inside door handle.
To lock the door without using the key 1. Move the inside lock knob to the locked position.
2. Be sure the keys are not inside the vehicle. Close the door. Key reminder buzzer
N00549600240
If you open the driver’s door while the key is in the “LOCK” or
“ACC” position, a tone will sound, reminding you to remove
the key. Lock out protection
N00549700179
If the key is in the electric motor switch when you push the
lock knob forward with the driver’s door or passenger’s door
open, the lock knob will automatically return to the unlocked
position.
1- Lock
2- Unlock
BK0140800US.book 13 ページ 2011年9月29日 木曜日 午後3時28分
Page 163 of 442
3-14 Features and controls
3Power door locks
N00509300607
NOTEWhen locking or unlocking with the key on the driver’s
door, only the driver’s door will lock or unlock.
Repeated continuous operation between lock and unlock
could activate the power door locking systems built-in
protection circuit and prevent the system’s from operat-
ing. If this occurs, wait about 1 minute before operating
the power door lock switch.
To lock and unlock by the power door lock switchAll of the doors and the liftgate can be locked or unlocked by
operating the power door lock switch on the driver’s or the pas-
senger’s door. 1- Lock
2- Unlock
BK0140800US.book 14 ページ 2011年9月29日 木曜日 午後3時28分
Page 164 of 442
Features and controls
3-15
3
To unlock the doors and liftgate
N00563400095
Using the selector lever positionAll doors and the liftgate will unlock when the selector lever is
moved to the “P” (PARK) position with the electric motor
switch in the “ON” position.
Child safety locks for rear door
N00509400288
Child safety locks help prevent rear passengers, especially chil-
dren, from opening the rear door using the inside door handle.
A lock lever for the child safety lock is provided on each rear
door.
When the lever is in the lock position (1), the rear door cannot
be opened using the inside door handle.
To open the rear door when the child safety lock lever is in the
lock position, pull the outside door handle.
When the lever is in the release position (2), the child safety
lock is released and the rear door can be opened using the
inside door handle.
You can select the functions to unlock the doors and liftgate
either using the electric motor switch position or using the selec-
tor lever position.
These functions are not activated when the vehicle is shipped
from the factory. To activate or deactivate these functions, please
contact a certified i-MiEV dealer.
1- To lock
2- To release
BK0140800US.book 15 ページ 2011年9月29日 木曜日 午後3時28分
Page 165 of 442
3-16 Features and controls
3Liftgate
N00510100230
To openAfter unlocking the liftgate, push the switch (A) and pull up the
liftgate.
WA R N I N G
!Always keep the doors tightly closed and locked
when driving. An unlocked door may be acciden-
tally opened by a passenger, especially by a child
who could fall out. Also, if the doors are not locked,
there is a greater risk of someone being thrown from
the vehicle in an accident.
WA R N I N G
!When opening and closing the liftgate, make sure
that there are no people nearby and be careful not to
hit your head or pinch your hands, neck, etc.
BK0140800US.book 16 ページ 2011年9月29日 木曜日 午後3時28分
Page 166 of 442
Features and controls
3-17
3
NOTEIf you do not open the liftgate immediately after pulling
the handle, the liftgate can not be lifted. If this happens,
pull the handle again and lift the liftgate.
The liftgate cannot be opened when the battery is flat or
disconnected.To closePull the liftgate grip (A) downward as illustrated. Gently push
the upper gate from the outside with enough force so that it is
completely closed. Always ensure the liftgate is securely
closed.
NOTEGas struts (B) are installed to support the liftgate.
To prevent damage or faulty operation.
• Do not hold the gas struts when closing the liftgate.
• Also, do not push or pull on the gas struts.
• Do not attach any plastic material, tape, etc., to the gas
struts.
• Do not tie anything, etc., around the gas struts.
• Do not hang any objects on the gas struts.
CAUTION
!To avoid injuring your hand or arm, do not attempt
to close the liftgate the gate grip (A).
Before starting the vehicle, be sure to confirm that
the liftgate is locked. If the liftgate opens while driv-
ing the vehicle, objects stored in the luggage com-
partment could fall out into the road.When closing the liftgate, always ensure that every-
body removes their hands and fingers from the
liftgate opening.
CAUTION
!
BK0140800US.book 17 ページ 2011年9月29日 木曜日 午後3時28分
Page 167 of 442
3-18 Features and controls
3Theft-alarm system
N00510200244
The theft-alarm system is designed to provide protection from
unauthorized entry into the vehicle. This system is operated in
three stages: the first is the “armed” stage, the second is the
“alarm” stage, and third is the “disarmed” stage. If triggered,
the system provides both audible and visual alarm signals.
CAUTION
!Do not modify or add parts to the theft-alarm sys-
tem. Doing so could cause the theft-alarm to mal-
function.
BK0140800US.book 18 ページ 2011年9月29日 木曜日 午後3時28分
Page 168 of 442
Features and controls
3-19
3
Armed stagePark the vehicle and stop the electric motor unit. Arm the sys-
tem as described below.
1. Remove the key from the electric motor switch.
2. Lock all doors and the liftgate by using the keyless entry
system.At this time, the theft-alarm indicator (A) in the meter
cluster flashes for confirmation.
3. The system has entered the armed stage after about 20
seconds, when the theft-alarm indicator flashing becomes
slower.
The theft-alarm indicator continues to flash while the sys-
tem is in the armed stage.Arm the system and leave
BK0140800US.book 19 ページ 2011年9月29日 木曜日 午後3時28分
Page 169 of 442
3-20 Features and controls
3
NOTEThe system will be disarmed if, while the theft-alarm indi-
cator is illuminated, all doors and the liftgate are unlocked
by using the keyless entry system.
The system will be disarmed if, while the theft-alarm indi-
cator is illuminated, the electric motor switch is turned to
the “ON”.
The system will not be armed if a door or the liftgate is not
completely closed. If this happens, rearm the system as
described above.
The theft-alarm system can be activated when people are
riding inside the vehicle or when the windows are open.
To prevent accidental activation of the alarm, do not set
the system to the system armed mode while people are
riding in the vehicle.
If the answerback function (flashing of the turn signal
lights by locking and unlocking the doors and the liftgate)
is deactivated, the turn signal lights do not flash after the
locking and unlocking operation.
For information on the answerback function, refer to
“Keyless entry system” on pages 3-7.Alarm stageThe alarm will be activated if the following occurs while the
vehicle is parked and the system is armed.
One of the doors and the liftgate is opened without using
the keyless entry system.
Type of alarmWhen the alarm is activated:
1. The headlights blink on and off for 3 minutes.
After 3 minutes the headlights automatically shut off.
2. The horn will sound intermittently for 3 minutes.NOTEThe alarm will continue to operate for 3 minutes. At the
end of that period, the alarm will automatically shut off to
save battery power. The system will then be rearmed until
the proper disarming step is taken.
The alarm will resume if unauthorized actions are taken
again, even if the alarm has stopped.Horn sounds!
Headlights blink on and off!
BK0140800US.book 20 ページ 2011年9月29日 木曜日 午後3時28分
Page 170 of 442
Features and controls
3-21
3
Alarm deactivationThe alarm can be deactivated in the following ways.
By using the keyless entry system to lock or unlock the
doors and liftgate.
Turn the electric motor switch to the “ON” position.Disarmed stageThe system will be disarmed if the following operation is per-
formed.
The electric motor switch is turned to the “ON” position.
All doors and the liftgate are unlocked by using the
keyless entry system.
NOTEIf the UNLOCK button on the remote control transmitter
is operated when all doors and the liftgate are closed and
no door is opened within approximately 30 seconds, re-
arming will automatically occur.
The amount of time after unlocking until the vehicle
relocks automatically can be adjusted. See a certified i-
MiEV dealer for details.
Once the system has been disarmed, it cannot be rearmed
except by repeating the arming procedure.Testing the theft-alarm systemUse the following procedure to test the system:
1. Lower the driver’s window.
2. Arm the system as explained in “Armed stage”.
3. Make sure that the theft-alarm indicator comes on and
flashes for approximately 20 seconds.
4. Wait a few seconds and then unlock the driver’s side door
by using the inside door lock knob. Open the door.
5. Make sure that the horn sounds intermittently and the
headlights blink when a door is opened.
6. Disarm the system by unlocking all doors and the liftgate
by using the keyless entry system.
Disarm...by using the keyless entry system
BK0140800US.book 21 ページ 2011年9月29日 木曜日 午後3時28分