MITSUBISHI iMiEV 2012 1.G Owners Manual

5-26 Comfort controls
5
Folder selection order/MP3 file playback order (Example)
To fast forward/reverse the discTo fast forward or fast reverse the disc, press the TRACK
button or the TRACK button.
Fast forward
You can fast-forward the disc by pressing the TRACK but-
ton. While the button is kept pressed, the disc will be fast-for-
warded.
Fast reverse
You can fast reverse the disc by pressing the TRACK but-
ton. While the button is kept pressed, the disc will be fast-
reversed.To select a desired trackYou can select your desired track by using the TRACK button.
Track up
Press the TRACK button repeatedly until the desired track
number appears on the display.
When listening to a MP3 CD, keep pressing the button to con-
tinue to move up tracks.
Track down
Press the TRACK button repeatedly until the desired track
number appears on the display.
When listening to a MP3 CD, keep pressing the button to con-
tinue to move down tracks.NOTE
Pressing the TRACK button once during the song will
cause the CD player to restart playback from the begin-
ning of the song.
Folder selection
In the order
File selection
In the order
Root folder (Root directory)
Tree 1 Tree 2 Tree 3 Tree 4
BK0140800US.book 26 ページ ２０１１年９月２９日　木曜日　午後３時２８分

Comfort controls
5-27
5
To find a file (MP3 CDs only)Operate the following buttons or the SELECT knob to select
desired file.
When this mode is activated by pressing the button, the
SEL indicator will be displayed in the display.NOTE
If no operation is performed for 10 seconds or more or
other button is operated after the SELECT knob has been
turned, searching of the desired file is canceled.

If no operation is performed for 5 seconds or more after
the file is displayed, playback starts.

When the SEL indicator is not shown on the display and
the SELECT knob is operated, the volume adjustment is
effective.
To select the playing mode
N00771500013
1. Press the MENU button until beeps.
2. Press the SEEK / button repeatedly to select the
mode.
3. Press the MENU button until you hear a beep. The
selected mode will operate.
button: Press the button to start this mode or cancel
the selection.
SELECT knob : Turn the knob to show the folder or file.
button: Press the button to select the folder or file.
(MP3 CDs only)
(MP3 CDs only)
BK0140800US.book 27 ページ ２０１１年９月２９日　木曜日　午後３時２８分

5-28 Comfort controls
5
To play tracks in repeat
N00771600014
Repeat an all track (normal playback)
Select the ALL REPEAT mode. Refer to “To select the playing
mode” on page 5-27.
The all tracks on the disc will be played repeatedly.
Repeat a track
Select the REPEAT mode. Refer to “To select the playing
mode” on page 5-27.
The RPT indicator will come on and repeat the same track.
Repeat tracks in the same folder (MP3 CDs only)
Select the F-REPEAT mode. Refer to “To select the playing
mode” on page 5-27.
The F-RPT indicator will come on and the all track on the cur-
rently selected folder will be played repeatedly.NOTE
With a disc that contains both CD-DA and MP3 files, the
repeat mode causes only files of the same format (CD-DA
only or MP3 files only) to be repeated.
To play tracks in random order
N00771800016
Random playback for a disc (music CDs only)
Select the RANDOM mode. Refer to “To select the playing
mode” on page 5-27.
The RDM indicator will come on and the tracks on the disc
will be played in a random sequence.
Random playback for a folder (MP3 CDs only)
Select the F-RANDOM mode. Refer to “To select the playing
mode” on page 5-27.
The F-RDM indicator will come on and the tracks on the cur-
rently selected folder will be played in a random sequence.
Random playback for all folders on a disc (MP3 CDs only)
Select the RANDOM mode. Refer to “To select the playing
mode” on page 5-27.
The RDM indicator will come on and the files from all the
folders on the disc will be playback in a random sequence.NOTE
With a disc that contains both CD-DA and MP3 files, the
random mode causes only files of the same format (CD-
DA only or MP3 files only) to be repeated.
BK0140800US.book 28 ページ ２０１１年９月２９日　木曜日　午後３時２８分

Comfort controls
5-29
5
To find the start of each track on a disc for playback
N00771900017
Press the SCAN button. “SCAN” will appear on the display
and the CD player will play back the first 10 seconds of each
track on the selected disc (music CDs only) or the currently
selected folder (MP3 CDs only).
The track number will blink while the scan mode is selected.
To stop the scan mode, press the SCAN button again.NOTE
Once all tracks on the disc (music CDs only) or the cur-
rently selected folder (MP3 CDs only) have been scanned,
playback of the disc will restart from the beginning of the
track that was playing when scanning started.

With a disc that contains both CD-DA and MP3 files, the
scan mode causes only files of the same format (CD-DA
only or MP3 files only) to be played.
CD text and MP3 title display
N00752100166
This audio system can display CD text and MP3 titles includ-
ing ID3 tag information.
CD text
The audio system can display disc and track titles for discs
with converted disc and track title information. Press the DISP
button repeatedly to make selections in the following sequence:
disc name → track name → normal display mode.NOTE
The display can show up to 11 characters. If a disc name
or track name has more than 11 characters, press the
PAGE button to view the next 11 characters.

When there is no title information to be displayed, the dis-
play shows “NO TITLE”.

Characters that the audio system cannot display are shown
as “ ”.
MP3 title
The audio system can display folder and track titles for discs
with converted folder and track information. Press the DISP
button repeatedly to make selections in the following sequence:
folder name → track name → normal display mode.
BK0140800US.book 29 ページ ２０１１年９月２９日　木曜日　午後３時２８分

5-30 Comfort controls
5
ID3 tag information
The audio system can display ID3 tag information for files that
have been recorded with ID3 tag information.
1. Press the DISP button for 2 seconds or longer to switch to
the ID3 tag information. “TAG” will appear on the dis-
play.
2. Press the DISP button repeatedly to make selections in the
following sequence: album name → track name → artist
name → normal display mode.NOTE
To return from ID3 tag information to the folder name,
press the DISP button again for 2 seconds or longer.

When there is no title information to be displayed, the dis-
play shows “NO TITLE”.

The display can show up to 11 characters. If a folder
name, track name, or item of ID3 tag information has
more than 11 characters, press the PAGE button to view
the next 11 characters.

Folder names, track names and ID3 tag information can
each be displayed up to a length of 32 characters.

Characters that the audio system cannot display are shown
as “ ”.
To play iPod/USB memory device tracks via
voice operation (vehicles with Bluetooth
®
2.0 interface)
N00772000015
Desired tracks can be selected and played from your iPod by
“Artist”, “Album”, “Playlist” and “Genre” using voice com-
mands.
For information concerning the voice recognition function or
speaker registration function, refer to “Bluetooth
® 2.0 inter-
face” on page 3-91.
The following explains how to prepare for voice operation and
play the tracks.
Preparation for voice operation
N00772100016
To use the voice operation, press the SPEECH button (1) first.
BK0140800US.book 30 ページ ２０１１年９月２９日　木曜日　午後３時２８分

Comfort controls
5-31
5
To search by artist name
N00772200017
1. Say “Play” on the main menu.NOTE
The Bluetooth
® 2.0 interface starts recognizing the con-
nected device.
If the connected device cannot be recognized or a connec-
tion error occurs, the Bluetooth
® 2.0 interface starts an
appropriate voice guide. Follow the voice guide.
2. After the voice guide says “Would you like to play by Art-
ist, Album, Playlist or Genre?,” say “Artist”.
NOTE
If you say “Artist <name>,” you can skip step 3.
3. After the voice guide says “What Artist would you like to
play?,” say the artist name.
4. If there is only one match, the system proceeds to step 6.5. If there are two or more matches, the voice guide will say
“More than one match was found, would you like to play
<artist name>?” If you say “Yes,” the system proceeds to
step 6.
If you say “No,” the next matching artist is uttered by the
system.
NOTE
If you say “No” to three or all artist names uttered by the
system, the voice guide will say “Artist not found, please
try again” and the system returns to step 2.

Search time depends on the number of songs on your con-
nected device. Devices containing a large number of
songs may take longer to return search results.
6. After the voice guide says “Playing <artist name>,” the
system creates a playlist index for the artist.NOTE
If the confirmation function is active, the voice guide con-
firms if the artist name is correct. If the artist name is cor-
rect, say “Yes”. If not, say “No”. After the voice guide
says “Artist not found, please try again,” the system
returns to step 2.
7. The system exits the voice recognition mode and starts
playback.
BK0140800US.book 31 ページ ２０１１年９月２９日　木曜日　午後３時２８分

5-32 Comfort controls
5
To search by album title
N00772300018
1. Say “Play” on the main menu.NOTE
The Bluetooth
® 2.0 interface starts recognizing the con-
nected device.
If the connected device cannot be recognized or a connec-
tion error occurs, the Bluetooth
® 2.0 interface starts an
appropriate voice guide. Follow the voice guide.
2. After the voice guide says “Would you like to play by Art-
ist, Album, Playlist or Genre?,” say “Album”.
NOTE
If you say “Album <title>,” you can skip step 3.
3. After the voice guide says “What Album would you like
to play?” say the album title.
4. If there is only one match, the system proceeds to step 6.
5. If there are two or more matches, the voice guide will say
“More than one match was found, would you like to play
<album title>?” If you say “Yes,” the system proceeds to
step 6.
If you say “No,” the name of the next matching album is
uttered by the system.NOTE
If you say “No” to three or all album titles uttered by the
system, the voice guide will say “Album not found, please
try again” and the system returns to step 2.6. After the voice guide says “Playing <album title>,” the
system creates a playlist index for the album title.
NOTE
If the confirmation function is active, the voice guide con-
firms if the album title is correct. If the album title is cor-
rect, say “Yes”. If not, say “No”. After the voice guide
says “Album not found, please try again,” the system
returns to step 2.
7. The system exits the voice recognition mode and starts
playback.To search by playlist
N00772400019
1. Say “Play” on the main menu.NOTE
The Bluetooth
® 2.0 interface starts recognizing the con-
nected device.
If the connected device cannot be recognized or a connec-
tion error occurs, the Bluetooth
® 2.0 interface starts an
appropriate voice guide. Follow the voice guide.
2. After the voice guide says “Would you like to play by Art-
ist, Album, Playlist or Genre?,” say “Playlist”.
NOTE
If you say “Playlist <playlist>,” you can skip step 3.
If the device has no playlist, the voice guide will say
“There are no playlists stored on device” and the system
returns to step 2.
BK0140800US.book 32 ページ ２０１１年９月２９日　木曜日　午後３時２８分

Comfort controls
5-33
5
3. After the voice guide says “What Playlist would you like
to play?,” say the playlist name.
4. If there is only one match, the system proceeds to step 6.
5. If there are two or more matches, the voice guide will say
“More than one match was found, would you like to play
<playlist>?” If you say “Yes,” the system proceeds to
step 6.
If you say “No,” the next matching playlist name is
uttered by the system.NOTE
If you say “No” to three or all playlist names uttered by
the system, the voice guide will say “Playlist not found,
please try again” and the system returns to step 2.
6. After the voice guide says “Playing <playlist>,” the sys-
tem creates an index for the playlist.NOTE
If the confirmation function is active, the voice guide con-
firms if the playlist name is correct. If the playlist name is
correct, say “Yes”. If not, say “No”. After the voice guide
says “Playlist not found, please try again,” the system
returns to step 2. Refer to “Confirmation function setting”
on page 3-95.
7. The system exits the voice recognition mode and starts
playback.
To search by genre
N00772500010
1. Say “Play” on the main menu.NOTE
The Bluetooth
® 2.0 interface starts recognizing the con-
nected device.
If the connected device cannot be recognized or a connec-
tion error occurs, the Bluetooth
® 2.0 interface starts an
appropriate voice guide. Follow the voice guide.
2. After the voice guide says “Would you like to play by Art-
ist, Album, Playlist or Genre?,” say “Genre”.
NOTE
If you say “Genre <type>,” you can skip step 3.
3. After the voice guide says “What Genre would you like to
play?,” say the music type.
4. If there is only one match, the system proceeds to step 6.
5. If there are two or more matches, the voice guide will say
“More than one match was found, would you like to play
<genre>?” If you say “Yes,” the system proceeds to
step 6.
If you say “No,” the next matching genre is uttered by the
system.NOTE
If you say “No” to three or all genres uttered by the sys-
tem, the voice guide will say “Genre not found, please try
again” and the system returns to step 2.
BK0140800US.book 33 ページ ２０１１年９月２９日　木曜日　午後３時２８分

5-34 Comfort controls
5
6. After the voice guide says “Playing <genre>,” the system
creates an index for the genre.NOTE
If the confirmation function is active, the voice guide con-
firms if the genre is correct. If the genre is correct, say
“Yes”. If not, say “No”. After the voice guide says “Genre
not found, please try again,” the system returns to step 2.
Refer to “Confirmation function setting” on page 3-95.
7. The system exits the voice recognition mode and starts
playback.
Steering wheel audio remote control switch

(if so equipped)
N00714800471
The remote control switch is located on the left side of the
steering wheel.
It can be used when the electric motor switch is in the “ON” or
“ACC” position.NOTE
Do not press multiple buttons at the same time when using
the steering wheel audio remote control switch.1- Volume up button
2- Volume down button
3- Power switch/Mode selector button
4- Seek up/Track up/File up/Fast-forward button
5- Seek down/Track down/File down/Fast-reverse button
BK0140800US.book 34 ページ ２０１１年９月２９日　木曜日　午後３時２８分

Comfort controls
5-35
5
To turn on the powerPress the power switch to turn on the power. When the power is
turned on, the last mode used before turning off is displayed.
To turn off the power, press and hold down the power switch
for about 2 seconds until you hear a beep.Vo l u m e c o n t r o lVolume up buttonWhile the button is pressed, the volume will continue to
increase.Volume down buttonWhile the button is pressed, the volume will continue to
decrease.Mode selectionPress the mode selector button to select the desired mode.
The mode changes in the following order.
AM → FM1 → FM2 → CD → USB or iPod* → Bluetooth
®*
→ AM
*: If you connect these devices.
To listen to the radioPress the mode selector button and select AM or FM mode.Automatic tuningSeek up button/Seek down button
After pressing one of these buttons, a receivable station will be
automatically selected and reception of the station will begin.
To listen to a CDPress the mode selector button and select CD mode.To fast forward/reverse the disc (music CDs only)To fast forward or fast reverse the disc, press the fast-forward
button or the fast-reverse button.
Fast forward
You can fast forward the disc by holding down the fast-forward
button. While the button is kept pressed, the disc will be fast-
forwarded.
Fast reverse
You can fast reverse the disc by holding down the fast-reverse
button. While the button is kept pressed, the disc will be fast-
reversed.NOTE
With an MP3 CD, you can fast forward and fast reverse
tracks in the same folder.
BK0140800US.book 35 ページ ２０１１年９月２９日　木曜日　午後３時２８分