MITSUBISHI iMiEV 2015 Owner's Manual (in English)

Air conditioning 7-8 Comfort controls
7
4. Select the desi
red blower speed.
1. Set the mode selection dial to the “ ” position.2. Set the air selection switch (A) to the out- side position. 3. Turn the temperature control dial clock-wise or counterclockwise to between mid- dle (
) position and “H” position.
4. Turn the blower speed selection dial to any position other than “OFF” position. 5. Press the MAX switch (B).
N00731201363
For ordinary cooling 1. Set the mode selection dial to the “ ” position. 2. Set the air selection switch (A) to the out- side position. 3. Turn the temperature control dial clock- wise or counterclockwise to the desired temperature be
tween middle (
) and “C”
position. 4. Select the desi
red blower speed.
5. Push the air conditioning switch (B).6. When the air conditioning is operating, the switch indicator light (C) illuminates.
NOTE
 When the blower speed selection dial is set to the “AUTO” positi
on, the air flow is
adjusted automatically according to the tem- perature of the interi
or and the position of
the temperature control dial.
Quick heating
NOTE
 Do not use the heating function with the MAX switch for a long time. Because the power consumption is gr
eatly increased, the
cruising range is shortened.
Cooling
BK0209800US.book 8 ページ ２０１４年１月１４日　火曜日　午前９時２６分

Air conditioning
Comfort controls 7-9
7
For quick cooling 1. Set the mode selection dial to the “ ” position. 2. Set the air selection switch (A) to the recirculati
on position.
3. Turn the temperature control dial clock-wise or counterclockwise to between mid- dle (
) and “C” position.
4. Turn the blower speed selection dial toany position other than “OFF” position. 5. Press the MAX switch (B). The air conditioning automatically oper-ates and the indicator light (C) illumi- nates.
N00731400557
To remove frost or fog from the windshield and door windows, use
the mode selection
dial (“ ” or “ ”). Use this setting to ke
ep the windshield and
door windows clear of mist, and to keep the leg area heated (when driving in rain orsnow). 1. Set the air selection switch (A) to the out- side position.
NOTE
 If the outside air is dus
ty or contaminated in
some way, set the air selection switch (A) tothe recirculation positi
on. Let in some out-
side air from time to time for good ventila- tion.  To cool the leg areas,
set the mode selection
dial to the “ ” position.  When the blower speed
selection dial is set
to the “AUTO” position, the air flow is adjusted automatically according to the tem-perature of the interior and the position of the temperature control dial.
NOTE
 Do not use the cooling function with the MAX switch for a l
ong time. Because the
power consumption is gr
eatly increased, the
cruising range is shortened.
Defrosting or defogging (wind- shield, door windows)
CAUTION For safety, make sure you have a clear view through all the windows.
For ordinary defrosting
BK0209800US.book 9 ページ ２０１４年１月１４日　火曜日　午前９時２６分

Important air condit
ioning operating tips
7-10 Comfort controls
7
2. Set the mode select
ion dial to the “ ”
position. 3. Turn the temperature control dial clock-wise or counterclockw
ise to the desired
temperature between middle (
) and “H”
position.4. Select the desi
red blower speed.
5. Push the air conditioning switch (B). For quick defrosting 1. Set the mode selection dial to the “ ” position. 2. Turn the temperature control dial clock- wise or counterclockw
ise to the desired
temperature between middle (
) and “H”
position. 3. Press the MAX switch (A).
N00733700323
1. Park the vehicle in the shade whenever possible. Parking in the hot sun makes thevehicle interior extremely hot which then requires more time to cool. If it is neces- sary to park in the sun, open the windowsfor the first few minutes of air condition- ing to expel the hot air. 2. Afterwards, keep the windows closedwhen the air conditioning is in use. The entry of outside air through open windows will reduce cooling efficiency.
3. When running the air conditioning, make sure the air intake, which is located infront of the windshield, is free of obstruc- tions such as leaves. Leaves collected in the air-intake chamber may reduce airflow and plug the water drains.
If the air conditioning seems less effective than usual, the cause might be a refrigerant leak. Have the system inspected by a certified i-MiEV dealer.
NOTE
 When the mode selection dial is set to the “ ” position, the air conditioning com- pressor runs automatically. Outside air intro-duction will also be se
lected automatically.
 When defrosting, do not set the temperature control dial to the
maximum cool position.
This would blow c
ool air on the window
glass and fog it up.  Since defogging or defrosting with the MAX switch consumes a la
rge amount of power,
stop the switch after
defogging or defrosting.
Use the MAX setting for a long time decreases the cruising range.
Important air conditioning operating tips
Air conditioning system refrig- erant and lubricant recommen- dations
BK0209800US.book 10 ページ ２０１４年１月１４日　火曜日　午前９時２６分

Air purifier
Comfort controls 7-11
7
The air conditioning should be operated for at least five minutes each week, even in cold weather. This includes the quick defrostingmode. Operating the
air condition system
weekly maintains lubrication of the compres- sor internal parts and maintains the air condi-tioning in the best operating condition.
N00733800177
The air conditioning system is equipped with an air filter to reduc
e pollen and dust entering
the cabin.The air filter’s ability to collect pollen and dust will be reduced as
it becomes dirty, so
replace it periodically. For the maintenanceinterval, refer to the “WARRANTY AND MAINTENANCE MANUAL”.
N00766600016
You can run the air conditioning in advance of using the vehicle. For details, refer to“Remote Climate Control” on page 3-43.
N00734302128
The audio system can only be used when the electric motor switch is in the “ON” or “ACC” position.
CAUTION The air conditioning system in your vehicle must be charged with the refrigerant HFC-134a and the lubricant POE MA68EV.Use of any other refrigerant or lubricant will cause severe damage a
nd may require replac-
ing your vehicle’s en
tire air conditioning
system. The release of refrigerant into the atmo- sphere is not recommended.The new refrigerant HFC-134a in your vehi- cle is designed not to harm the earth’s ozone layer. However, it may contribute slightly toglobal warming. It is recommended that the old refrigerant be saved and recycled for future use.
During a long period of disuse
Air purifier
NOTE
 Operation in certain conditions such as driv- ing on a dusty road or frequent use of the air conditioning can reduce
the service life of
the filter. When you feel that the air flow is lower than normal or when the windshield or windows start to fog up easily, replace the airfilter. Contact a certified i-MiEV dealer for assis- tance.
Remote Climate Control
(if so
equipped)
AM/FM electronically tuned radio with CD player
NOTE
 To listen to the audio system while the elec- tric motor unit is not running, turn the elec- tric motor switch to the “ACC” position. If the electric motor switch is in the “ACC”position, the accessory power will automati- cally turn off after a certain period of time and you will no longer be able to use theaudio system. The accessory power comes on again if the electric motor switch is turned from the “ACC” position. Refer to “ACCpower auto-cutout f
unction” on page 5-19.
 If a cellular phone is
used inside the vehicle,
it may create noise in the audio equipment. This does not mean that anything is wrong with your audio equipment. In such a case,use the cellular phone at
a place as
far away
as possible from the audio equipment.  If foreign objects or wa
ter get into the audio
equipment, or if smoke or a strange odor comes from it, immediately turn off theaudio system and have
it checked at a certi-
fied i-MiEV dealer. Never try to repair it yourself. Avoid using the audio system untilit is inspected by a qualified person.
BK0209800US.book 11 ページ ２０１４年１月１４日　火曜日　午前９時２６分

AM/FM electronically tune
d radio with CD player
7-12 Comfort controls
7
N00711900716 N00712000408
Turn the VOLUME knob clockwise to increase the volume; counterclockwise todecrease the volume.
The status will be displayed in the display.
N00712100672
1. Press the button repeatedly to select the tone, balance and SCV (Speed Com-pensated Volume) function control to change. The order is: BASS
 TREBLE
 FADER
 BALANCE
 SCV

Audio adjust mode OFF
2. Press the SEEK button to change the tone, balance and SCV function setting.The status will be di
splayed in the display.
If the audio system is damaged by foreign objects, water, or fi
re, have the system
checked at a certif
ied i-MiEV dealer.
Volume and tone control panel 1- VOLUME (Volume control) knob 2- SEEK (Audio adjust) button 3- Display4- POWER (On-Off) button 5- (Mode change) buttonTo adjust the volume
NOTE
NOTE
 The volume control mode will shut off auto- matically if the anothe
r mode is selected, or
if no adjustment is ma
de within about 2 sec-
onds.
To adjust the tone
A- Adjust mode B- Adjust levelAdjust Mode
AdjustLevel
SEEK button opera-
tion
BASS
-6 to 6
Stronger Weaker
TRE- BLE
Stronger Weaker
FADER
F11 to R11
F (Front) increases
R (Rear) increases
BAL- ANCE
L11 to R11
R (Right) increases
L (Left) increases
BK0209800US.book 12 ページ ２０１４年１月１４日　火曜日　午前９時２６分

AM/FM electronically tuned radio with CD player
Comfort controls 7-13
7
To select the desired bass level. To select the desi
red treble level.
To balance the volume from the F (front) and the R (rear) speakers.
To balance the volume from the L (left) and the R (right) speakers. Speed Compensated Volume function is a feature that automatically adjusts the VOL- UME, BASS and TREBLE
settings in accor-
dance with the vehicle speed.The effects of the SCV function can be selected either of three levels (LOW, MID and HIGH). Select the degree of your choiceby pressing the SEEK button. If you want to stop th
e SCV function, select
the OFF.
N00734900902 N00735000913
1. Press the POWER button until it beeps to turn the audio system ON and OFF. The system turns on in the last mode used. Press the RADIO button to turn ON theradio. 2. Press the RADIO but
ton to select the
desired band (AM/FM1/FM2).
SCV
HIGH, MID, LOW, OFF
HIGH  MID LOW  OFF
HIGH  MID LOW  OFF
BASS (Bass tone control) TREBLE (Treble tone control) FADER (Front/Rear balance con- trol) Adjust Mode
AdjustLevel
SEEK button opera-
tion
BALANCE (Left/Right balance control) SCV (Speed Compensated Vol- ume) function
NOTE
 The audio adjust mode will automatically shut off when another m
ode is selected, or if
no adjustment is made within about 10 sec-onds.
Radio control panel and display 1- FM (FM1/FM2) indicator 2- RADIO (AM/FM selection) button3- MEMORY (Memory selection) button 4- POWER (On-Off) button 5- SCAN button6- SEEK (Up-seek) button 7- SEEK (Down-seek) buttonTo listen to the radio
BK0209800US.book 13 ページ ２０１４年１月１４日　火曜日　午前９時２６分

AM/FM electronically tune
d radio with CD player
7-14 Comfort controls
7
3. Press the SEEK button
to tune to a station,
or press the MEMORY button either or to tune in to a station memorized. Refer to “Automatic tuning”, “Manualtuning” or “To enter frequencies into the memory”.
After pressing the SEEK button, a receivable station will be automatically selected andreception of the st
ation will begin.
Press the SCAN button.
The radio will tune
consecutively to each
available station for
about 5 seconds per stat
ion. If you want to
stop scanning, press the SCAN button again. The frequency display of the current stationflashes once per second during SCAN. The frequency changes every time the SEEK button is pressed. Press the button to select the desired station.
As many as 6 AM and 12 FM stations can be entered into the memory. To store a frequency in the memory, follow these steps: 1. Press the SEEK button to tune to the fre- quency you wish to keep in the memory. 2. Press the MEMORY button either or
until it beeps. The sound will be momentarily inter- rupted while the frequency is beingentered into the memory. 3. To recall a frequency
that has been saved
in memory, press the MEMORY button briefly for no longer than about 1 second.
N00735300743
Automatic tuning SCAN functionManual tuning
To enter frequencies into the mem- ory
NOTE
 Disconnecting the 12V st
arter battery cables
erases all the radio stat
ion settings stored in
the memory.
CD control panel and display 1- Disc loading slot 2- Eject button3- CD (CD mode changeover) button 4-
TRACK (Fast-forward/Track up) button
5-
TRACK (Fast-reverse/Track down) button
6- CD indicator 7- SEL (Select mode) indicator 8- FOLDER indicator9- TRACK indicator 10- Display 11- RDM/F-RDM indicator
BK0209800US.book 14 ページ ２０１４年１月１４日　火曜日　午前９時２６分

AM/FM electronically tuned radio with CD player
Comfort controls 7-15
7
N00735502097
1. Press the POWER button until it beeps to turn the audio system ON and OFF. The system turns on in the last mode used. 2. Insert the disc with the label facing up.When a disc is inserted, the CD indicator will come on and the CD player will begin playing even if the radio is being used.The CD player will also begin playing when the CD button is pressed with a disc set in the CD player or in the disc loadingslot, even if the radio is being used.
When the eject button is pressed, the disc automatically stops and is ejected. The sys-tem automatically switches to radio mode.
Push the CD button if a disc is already in the CD player. The audio
system will enter CD
mode and start playba
ck. The track number
and the playing time wi
ll appear on the dis-
play. The tracks in the disc will be played consecutively a
nd continuously.
This CD player allows you to play MP3 (MPEG Audio Layer-3) files recorded on CD-ROMs, CD-Rs (recordable CDs), andCD-RWs (rewritable CDs) in ISO9660 Level 1/Level 2, Joliet, and Romeo formats. Each disc may have a maximum of 16 trees, 100folders and 255 files.
During MP3 playback,
the unit can display ID3 tag information. For information concerning ID3 tag, refer to “CD
12- RPT/F-RPT indicator 13- SELECT knob 14- POWER (On-Off) button/PAGE (Title
scroll) button
15- DISP (Title display) button 16- MENU button17- SCAN button 18-
SEEK (Up-seek) button/ (Return) button
19-
SEEK (Down-seek) button/ (Select) button
To listen to a CD To set a disc
NOTE
 For information concerning the adjustment of volume and tone, refer to “To adjust thevolume” on page 7-12 and “To adjust thetone” on page 7-12.  3 inches (8 cm) compact disc cannot be played on this CD player.  For information concerning the handing of the compact discs, re
fer to “Handling of
compact discs” on page 7-20.
To eject a disc
NOTE
 If you do not remove an ejected disc before 15 seconds have elapse
d, the disc will be
reloaded.
To listen to a music CD To listen to an MP3 CD
BK0209800US.book 15 ページ ２０１４年１月１４日　火曜日　午前９時２６分

AM/FM electronically tune
d radio with CD player
7-16 Comfort controls
7
text and MP3 title di
splay” on page 7-19.
Push the CD button if a disc is already in the CD player.The display shows “READING”, then play- back begins. The folder number, the track number and the playing
time will appear on
the display.
To fast forward or fast
reverse the disc, press
the TRACK button or the TRACK but- ton.
NOTE
 While listening to a
disc on which CD-DA
(CD-Digital Audio) a
nd MP3 files have both
been recorded, you can switch between read- ing of the CD-DA, reading of the MP3 files,and the external audi
o input mode by press-
ing the CD button for 2 seconds or longer (until you hear a beep).  With a disc that contains both CD-DA and MP3 files, the CD-DA files are automati-cally played first.
 The playback sound quality differs depend- ing on the encoding software and the bit rate.For details, refer to
the user manual of your
encoding software.  Depending on file/folde
r configurations on a
disc, it may take some
time before playback
starts.  MP3 encode software and writing software are not supplied with this unit.  You may encounter trouble in playing an MP3 or displaying the information of MP3 files recorded with certain writing softwareor CD recorders (CD-R/RW drivers).  If you record too many folders or files other than MP3 onto a disc, it
may take some time
before playback starts.  This unit does not record MP3 files.  For information concerning CD-Rs/RWs, refer to “Notes on CD-Rs/RWs” on page 7-21.CAUTION Attempting to play a fi
le not in the MP3 for-
mat which has the “.mp3” file name may produce noise from the speakers and speakerdamage, and can damage your hearing.NOTE
Folder selection order/MP3 file playback order (Example) Folder selection In the order File selection In the orderTo fast forward/reverse the disc
Root folder (Root directory)
Tree 1 Tree 2 Tree 3 Tree 4
BK0209800US.book 16 ページ ２０１４年１月１４日　火曜日　午前９時２６分

AM/FM electronically tuned radio with CD player
Comfort controls 7-17
7
You can fast-forward the disc by pressing the TRACK button. While the button is kept pressed, the disc w
ill be fast-forwarded.
You can fast reverse th
e disc by pressing the
TRACK button. While the button is kept pressed, the disc w
ill be fast-reversed.
You can select your desired track by using the TRACK button. Press the TRACK button repeatedly until the desired track number appears on the dis-play. When listening to a MP
3 CD, keep pressing
the button to continue
to move up tracks.
Press the TRACK button repeatedly until the desired track number appears on the dis-play. When listening to a MP
3 CD, keep pressing
the button to continue
to move down tracks.
Operate the following buttons or the SELECT knob to select
desired file.
When this mode is activated by pressing the
button, the SEL indicator will be dis-
played in the display.
N00771500013
1. Press the MENU button until beeps. 2. Press the SEEK / button repeatedly to select the mode. 3. Press the MENU button until you hear a beep. The selected
mode will operate.
Fast forward Fast reverseTo select a desired track Tr a c k u p Tr a c k d o w n
NOTE
 Pressing the TRACK button once during the song will ca
use the CD player to restart
playback from the beginning of the song.
To find a file (MP3 CDs only)
button
:Press the button to start this mode or cancel
the selection.
SELECT knob :Turn the knob to show the
folder or file.
button
:Press the button to select the folder or file.
NOTE
 If no operation is perfo
rmed for 10 seconds
or more or other butt
on is operated after the
SELECT knob has been turned, searching ofthe desired file is canceled.  If no operation is performed for 5 seconds or more after the file is
displayed, playback
starts.
 When the SEL indicator is not shown on the display and the SELECT knob is operated,the volume adjustment is effective.
To select the playing mode
NOTE(MP3 CDs only) (MP3 CDs only)
BK0209800US.book 17 ページ ２０１４年１月１４日　火曜日　午前９時２６分