dashboard MITSUBISHI LANCER 2005 Workshop Manual

EVAPORATOR ASSEMBLY
HEATER, AIR CONDITIONER AND VENTILATION55-90
REMOVAL SERVICE POINT
<<A>> FLEXIBLE SUCTION HOSE AND
LIQUID PIPE B DISCONNECTION
CAUTION
As the compressor oil and receiver are highly
moisture absorbent, use a non-porous material
to plug the hose and nipples.
To prevent the entry of dust or other foreign bodies,
plug the dismantled hose and the nipples of the
expansion valves.
<<B>> EVAPORATOR REMOVAL
CAUTION
Do not cut the upper side of the pad.
1. When removing the evaporator, cut and fold back
the dashboard pad as in the diagram. (The
thickness of the pad interferes with the removal of
the evaporator.)
2. Remove the evaporator.
INSPECTIONM1552014300938
AIR THERMO SENSOR INSPECTION
Measure the resistance between connector terminals
4 and 5 under at least two different temperatures.
The resistance values should generally match those
in the graph.
NOTE: The temperature at the check should not
exceed the range in the graph.
AC305312AB
Dashboard pad
Blower unit
AC103376
Resistance
Temperature (˚C) -10 01020
30
40 (kΩ)
05 10 152025
AB