Lock control MITSUBISHI OUTLANDER SPORT 2014 3.G Owners Manual

Ta b l e o f c o n t e n t s
12345678910111213
OverviewGeneral informationChargingLocking and unlockingSeat and seat beltsInstruments and controlsStarting and drivingFor pleasant drivingFor emergenciesVehicle careMaintenanceSpecificationsAlphabetical index
BK0203201EN.book 1 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Instruments and Controls
Overview 1-2
1
Audio
*
Mitsubishi Multi Communication System (MMCS)
*
[For DISPLAY AUDIO and MMCS, refer to the separate owner’s manuals.]Digital clock
*
Accessory socket
* P.8-66
4WD lock switch P.7-19
Glove box P.8-68Card holder P.8-68Passenger’s ventilators P. 8 - 2
Bonnet release lever P. 1 1 - 3
Key slot P.7-13
Fuel tank filler door release lever P.2-13
Parking brake lever P.7-4
Selector lever (Joystick Type) P.7-14
Hazard warning flasher switchP. 6 - 4 5
Air conditioner P.8-4
Rear window demister switch P.6-53Wiper deicer switch* P.6-53
Fuse box P.11-15
Supplemental restraint system (SRS) - airbag (for front passenger’s seat) P.5-23
Floor console box P.8-69ArmrestAccessory socket P.8-66USB input terminal P.8-61
Heated seat switch
* P.5-4
Cup holder P.8-70
Electric tailgate power switch
* P.4-17
BK0203201EN.book 2 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Interior1-3 Overview
1
E00100206107
Interior Supplemental restraint system - airbag (for front passenger’s seat) P.5-21, 5-23
Room lamp (Front) P.8-67, 11-23Front seat P.5-3Heated seats
* P.5-4
Supplemental restraint system - side airbag (for front seat)
* P.5-27
Rear seat P.5-5
Supplemental restraint system -curtain airbag
* P.5-27
Armrest P.5-5Cup holder P.8-70
Electric remote-controlled outside rear-view mirrors switch P.7-7
Central door lock switch P.4-15
Lock switch P. 4 - 3 0
Electric window control switch P. 4 - 2 9
Head restraints P.5-5
Battery save switch P.7-22
Battery charge switch P.7-23
Auxiliary battery P.11-8
Room lamp (Rear) P.8-67, 11-23
BK0203201EN.book 3 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Normal charging (charging method with rated AC 240 V outlet)
Charging 3-9
3
E08304101035
The charging port courtesy lamp (A) illumi-nates when the charging lid is opened.
•Only use the EV charging cable that issupplied with the vehicle.•Do not charge another vehicle by the EVcharging cable. The cable may over heatand result in a fire.•When charging outd
oors, make sure to
use an outlet that is protected from waterentering.•Do not perform charging with the carcover.•Do not connect or disconnect the plugand connector with wet hands.•Do not charge the battery if there is arisk of lightning.
zWhen the EV charging cable or the plugare damaged or it cannot connect byentering a foreign substance, do not con-nect the EV charging cable by force.zWhile it is normal for the connector andcharging cable to become warm duringcharging, discontinue use immediately ifthe connector or charging cable becomeshot to the touch.zWhile it is normal for the control box tobecome warm during
charging, discon-
tinue use immediately if the control boxbecomes hot to the touch.zIf abnormal smells are detected or thevehicle produces smoke, quickly stopcharging.WA R N I N G
zDo not perform chargi
ng in a poorly ven-
tilated area or in an
enclosed area. Keep
sparks, cigarettes,
and flames away from
the auxiliary battery.Flammable gas generated from the auxil-iary battery during charging may betrapped, resulting in explosion.If charging is inevitably required, venti-late the area well.zGrasp the normal charge connector whenconnecting or disconn
ecting the EV charg-
ing cable.Grasping the cable may damage the cableand could cause an electric shock, shortcircuit, and/or fire.CAUTIONzDuring charging, the cooling fans inside theengine room may automatically be operatedeven if the operation mode of the powerswitch in OFF.Keep your hands away from the cooling fanduring charging.zDo not perform charging from other powersource like a generator. Doing so could causea malfunction.WA R N I N G
NOTE
zIf the charge connector is not easily con-nected to the charge port due to foreign mat-ter entering, never force the connection.Doing so could damage the charging equip-ment or the vehicle. Please contact a MIT-SUBISHI MOTORS Authorised ServicePoint.zThe on board charger is only for rated AC240 V outlets.zWhen connecting or disconnecting the nor-mal charge connector, insert/pull out the con-nector straight.Also, do not incline or twist the connector.Doing so could caus
e a bad connection or
malfunction.zMake sure to lock the doors to prevent theft,etc. during charging.
Charging port courtesy lamp
BK0203201EN.book 9 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Normal charging (charging method with rated AC 240 V outlet)3-10 Charging
3
Press the charging port courtesy lamp switch(B) to turn on the charging port courtesy lampagain.
E08301001091
1. Firmly apply the parking brake, press theelectrical parking switch, then shift theselect position in “P” (PARK) position.2. Turn off electrical equipment such aslamps and put the operation mode of thepower switch in OFF.3. Push the rear portion of the charging lid(A) until it clicks, and open the charginglid.
4. Press the tab (B) to open the inner lid (C).
NOTE
zThe charging port courtesy lamp illuminat-ing time can be adjusted.For details, please consult a MITSUBISHIMOTORS Authorised Service Point.zWhen the select position is not in “P”(PARK) position, the charging port courtesylamp does not illuminate when the charginglid is opened.zIf the MITSUBISHI Remote Control is oper-ated when the charging port courtesy lamp isoff, the lamp may illuminate.
A
B
Charging from rated AC 240 V outlet
WA R N I N GzIt could cause electric leak, a fire or elec-tric shock by entering water or dust intothe normal charge port.zDo not touch the metal terminal of thenormal charge port (D) and the normalcharge connector.Doing so could cause an electric shockand/or malfunction.NOTE
zThere is a hole on the charge port for waterdrainage. If this hole
is blocked and water
gets trapped in the charge port, do notcharge. Please contact a MITSUBISHIMOTORS Authorised Service Point.zIf the charge port is frozen, melt the ice usinga hair drier. Forcing the charge connector toconnect while frozen could result in mal-function.
B
C
D
BK0203201EN.book 10 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Normal charging (charging method with rated AC 240 V outlet)
Charging 3-13
3
8. Make sure that the charging indicator (H)on the instrument cluster is illuminated.If the charging indicator is not illumi-nated, charging has not started.Make sure that the normal charge port andthe plug are correctly connected, and per-form charging from Step 5 again.
9. Charging is complete when the chargingindicator turns off. Pull out the normalcharge connector while pressing the but-ton (K).
10. Close the inner lid and press the rear of
the normal charging lid until it clicks toclose it.
11. Remove the charging cable plug from the
outlet.
IH
J
NOTE
zWhen the normal charge connector is con-nected to the charge port, the charging indi-cator will blink. When charging is started,the charging indicator is illuminated.zIf one of the doors is opened or the multi-information display switch is operated, thedrive battery level display (I) appears in themulti-information disp
lay and indicates the
drive battery level. In addition, when theremaining time is less than 1 hour, the pre-dicted charging time display (J) appears --:--and does not indicate a malfunction.
K
CAUTIONzBe sure to check the normal charge connec-tor is removed from the normal charge port.Since it will change into the state which canbe started the vehicle when the power switchis operated if the normal charge connectordoes not locked completely, resulting in anunexpected accident.NOTE
zCharging can be stopped half way. In thiscase, also, pull out the normal charge con-nector while pressing the button. Pressingthe manual stop button on the control boxcan also stop charging.Refer to “EV charging cable” on page 3-5.NOTE
zMake sure that the inner lid is completelyclosed.If the normal charging lid is forcibly closedwithout completely cl
osing inner lid, the
hinge on the inner lid may be broken.
BK0203201EN.book 13 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

4
Locking and unlockingKeys ..................................................................................................4-2Key number tag ................................................................................4-2Electronic immobilizer (Anti-theft starting system) .........................4-3Keyless entry system ........................................................................4-3Keyless operation system .................................................................4-6Doors...............................................................................................4-14Central door locks ...........................................................................4-15“Child-protection” rear doors .........................................................4-15Ta i l g a t e * . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 1 6Electric tailgate* .............................................................................4-17Inside tailgate release......................................................................4-24Security alarm system * ..................................................................4-24Electric window control ..................................................................4-29Sunroof * ........................................................................................4-31
BK0203201EN.book 1 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Electronic immobilizer (An
ti-theft starting system)
Locking and unlocking 4-3
4
E00300202996
The electronic immobilizer is designed toreduce significantly the possibility of vehicletheft. The purpose of the system is to immo-bilize the vehicle if an invalid start isattempted. A valid start attempt can only beachieved by using a key “registered” to theimmobilizer system.
E00300303721
Press the remote control switch, and all doorsand the tailgate will be locked or unlocked asdesired. It is also possible to operate the out-side rear-view mirrors.
Press the LOCK switch (1). All the doors andthe tailgate will be locked. The turn-signallamps will blink once when the doors and thetailgate are locked.Press the UNLOCK switch (2). All the doorsand the tailgate will be unlocked. If the doorsand tailgate are unlocked when the front roomlamp switch is in the “DOOR” position or therear room lamp switch is in the middle (
z)
position, the room lamp will illuminate for
Electronic immobilizer (Anti-theft starting system)
NOTE
zIf the plug-in hybrid EV system does notstart, we recommend you to contact yourMITSUBISHI MOTORS Authorised ServicePoint.
zIf you lose one of ke
yless operation keys,
contact your MITSUBISHI MOTORSAuthorised Service Poin
t as soon as possible.
To o b t a i n a r e p l a c e m e n t o r e x t r a s p a r e k e y,take your vehicle and all remaining keys toyour MITSUBISHI MOTORS AuthorisedService Point. All the keys have to be re-reg-istered in the immobiliser computer unit. Theimmobilizer can register as follows.•Keyless operation key: up to 4 differentkeysCAUTIONzDo not modify or add parts to the immobi-lizer system. Doing so could cause theimmobilizer to malfunction.
Keyless entry system
NOTE
1- LOCK switch2- UNLOCK switch3- Electric tailgate switch*4- Indicator lampTo l o c k To u n l o c k
BK0203201EN.book 3 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Keyless entry system4-4 Locking and unlocking
4
approximately 15 seconds and the turn-signallamps will blink twice.The position and tail lamps can also be set toturn on for about 30 seconds. Refer to“Instruments and controls: Welcome light” onpage 6-43.
E00310801259
Within 30 seconds of locking the doors andtailgate using the LOCK switch (1), press theLOCK switch twice rapidly to fold the out-side rear-view mirrors.
Within 30 seconds of unlocking the doors andtailgate using the UNLOCK switch (2), pressthe UNLOCK switch twice rapidly to returnthe outside rear-view mirrors to theirextended positions.The outside rear-view mirrors are not initiallyset to work as described above. If you wantthem to work as described above, you need toset them so that they do not retract/extendwhen the doors and tailgate arelocked/unlocked using the keyless entry sys-tem or keyless operation function.Refer to “Starting and driving: Outside rear-view mirrors” on page 7-7.For details, please consult a MITSUBISHIMOTORS Authorised Service Point.In a vehicle equipped with the MitsubishiMulti-Communication System (MMCS), it ispossible to change the setting by means ofscreen operations.Refer to the separate owner’s manual fordetails.
NOTE
zThe door and tailgate
unlock function can be
set so that only the driver’s door unlockswhen the UNLOCK switch (2) is pressedonce.If the door and tailgate unlock function is setto work as described above, all the doors andthe tailgate unlock when the UNLOCKswitch is pressed two times in succession.Refer to “Setting of door and tailgate unlockfunction” on page 4-5.zIf the UNLOCK switch (2) is pressed andany of the doors or ta
ilgate is not opened
within approximately 30 seconds, relockingwill automatically occur.zIt is possible to modify
functions as follows:
For further informati
on, please contact your
MITSUBISHI MOTORS Authorised ServicePoint. On vehicles equipped
with Mitsubishi Multi-
Communication System (MMCS), screenoperations can be used to make the adjust-ment. Refer to the separate owner’s manualfor details.•The time for automatic relocking can bechanged.
•The confirmation function (blinking of theturn-signal lamps) can be set to operateonly when the doors and tailgate are lockedor only when the doors and tailgate areunlocked.•The confirmation func
tion (this indicates
locking or unlocking of
the doors and tail-
gate with the blink of the turn-signal lamps)can be deactivated.•The number of times the turn-signal lampsare blinked by the confirmation functioncan be changed.
Operation of the outside rear-view mirrors (Vehicles equipped with the mirror retractor switch) To f o l d
NOTE
To e x t e n d
NOTE
zThe outside rear-view mirrors automaticallyretract when all the doors and tailgate arelocked using the keyless operation function.Refer to “Starting and driving: Outside rear-view mirrors” on page 7-7.
BK0203201EN.book 4 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分

Keyless entry system
Locking and unlocking 4-5
4
E00310301296
The door and tailgate unlock function can beset to the following two conditions.Each time the door and tailgate unlock func-tion is set, a chime will sound to tell you thecondition of the door and tailgate unlockfunction.1. Put the operation mode in OFF.2. Place the combination headlamps and dip-per switch in the “OFF” position, andleave the driver’s door open.3. Press the LOCK switch (1) for 4 to 10seconds and press the UNLOCK switch(2) during this time.
4. Release in sequence the LOCK andUNLOCK switches within 10 seconds ofpressing the LOCK switch in step 3.
E00309501243
Before replacing the battery, remove staticelectricity from your body by touching ametal grounded object.
zThe keyless entry system does not operatewhen the door or tailgate is open.zThe remote control switch will operatewithin about 4 m from the vehicle. However,the operating range of the remote controlswitch may change if the vehicle is locatednear a power station,
or radio/TV broadcast-
ing station.zIf either of the following problems occurs,the battery may be exhausted.•The remote control switch is operated at thecorrect distance from the vehicle, but thedoors and tailgate are
not locked/unlocked
in response.•The indicator lamp (4) is dim or does notcome on.For further information, please consult yourMITSUBISHI MOTORS Authorised Ser-vice Point.If you replace the battery yourself, refer to“Procedure for replacing the remote controlswitch battery” on page 4-5.
zIf your remote control switch is lost or dam-aged, please contact
your MITSUBISHI
MOTORS Authorised Service Point for areplacement remote control switch.zIf you wish to add a remote control switch,we recommend you to contact yourMITSUBISHI MOTORS Authorised ServicePoint.The below remote control switches are avail-able for your vehicle.NOTE
•Keyless operation key: up to 4 remote con-trol switches
Setting of door and tailgate unlock function Number of chimes
Condition
One chime
All doors and the tailgate unlock
Tw o chimes
Driver’s door unlock only
NOTE
NOTE
zOn vehicles equipped
with Mitsubishi Multi-
Communication System (MMCS), screenoperations can be used to make the adjust-ment. Refer to the se
parate owner’s manual
for details.
Procedure for replacing the remote control switch battery
BK0203201EN.book 5 ページ ２０１３年１１月１９日　火曜日　午前１１時５０分