display NISSAN 350Z 2005 Z33 Navigation Manual
Page 169 of 202
3. The [BUTTON TONE/BEEP RESPONSE]
screen will be displayed.
When turning on/off the beep sound, select theOn or
Off key.
When the PUSH ENTER button is pressed, the
selected key will be illuminated.
INFO:
Press the MAP button to return to the map.You can alter the display mode.
ADJUSTING THE DISPLAY
BRIGHTNESSYou can choose the best brightness for the
display.
1. Press the SETTING button.
2. Select the
Display key.
INV1729
INV1730
SETTINGTHE DISPLAY MODE
How do I adjust the display?
11-21
04.7.6/Z33-N
Page 170 of 202
3. The [DISPLAY SETTINGS] screen will be
displayed.
Select the
Brightness/Contrast/Map Background
key.4. Select the
Brightness key.
When the joystick is tilted to the right, the screen
will brighten, and darken when tilted to the left.
INFO:
The screen displayed before pressing the
SETTING button will be displayed as a sample
screen on the [DISPLAY SETTINGS] screen.
ADJUSTING THE DISPLAY
CONTRASTYou can choose the best contrast for the dis-
play.
1. Press the SETTING button.
INV1731
INV1732
11-22
How do I adjust the display?
04.7.6/Z33-N
Page 171 of 202
2. Select the
Display key. 3. The [DISPLAY SETTINGS] screen will be
displayed.
Select the
Brightness/Contrast/Map Background
key.4. Select the
Contrast key.
When the joystick is tilted to the right, contrast of
the screen will be higher, and will be lower when
tilted to the left.
INV1730
INV1731
INV1735
How do I adjust the display?
11-23
04.7.6/Z33-N
Page 172 of 202
SWITCHING THE DISPLAY COLOR1. Press the SETTING button.
2. Select the
Display key. 3. The [DISPLAY SETTINGS] screen will be
displayed.
Select the
Brightness/Contrast/Map Background
key.
INV1730
INV1731
11-24
How do I adjust the display?
04.7.6/Z33-N
Page 173 of 202
4. Select the
Map Background key.
The display brightness will be altered.
HOW TO USE THE
(DAY/
NIGHT) BUTTON
1. Press the
button.
2. When the
button is pressed, the
screen will repeatedly switch between normal
lighting and dimmer lighting independently of
turning on or off of illumination.
INV1738
INV1739
How do I adjust the display?
11-25
04.7.6/Z33-N
Page 174 of 202
DISPLAY OFFThe display can be turned off with the following
procedure.
1. Press the SETTING button.
2. Select the
Display key. 3. The [DISPLAY SETTINGS] screen will be
displayed.
Select the
Display Off key.
The indicator of the [DISPLAY OFF] will turn
green.
INV1730
INV1741
11-26
How do I adjust the display?
04.7.6/Z33-N
Page 175 of 202
4. A comment will be displayed for 5 seconds
and the display will turn off.
To restart the display, press the SETTING
button and select the
Display Off key again.
INFO:
When the INFO and MAP buttons are
pressed with the display turned off, the
screen shows normally, then the display turns
off again.
When the
button is pressed with the
display turned off, the display brightness is
changed when the screen is re-displayed.
SETTING DISPLAY DURATIONYou can set the display duration time.
1. Press the SETTING button.
2. Select the
Display key.
INV1742
INV1730
How do I adjust the display?
11-27
04.7.6/Z33-N
Page 176 of 202
3. The [DISPLAY SETTINGS] screen will be
displayed.
Select the
Setting Display Duration key.
INFO:
When you finish setting the display duration
time, the display will return to the previous
display automatically.The display uses liquid crystal and should be
handled with care.
WARNING
Never disassemble the display. It has
some areas with extreme high voltage.
Touching it may result in serious per-
sonal injury.CHARACTERISTICS OF LIQUID
CRYSTAL DISPLAYIf the temperature inside the vehicle is espe-
cially low, the display will stay relatively dim or
the movement of the images may be slow.
These conditions are normal; when the tem-
perature rises, the display will function nor-
mally.
You may notice darker or brighter dots in
parts of the display; this is inherent in monitor
displays and is not a malfunction.
You may also notice a remnant of the previ-
ous display image on the screen. This after-
image is inherent in displays and is not
abnormal.INFO:
The screen may become distorted by strong
magnetic fields.
MAINTENANCE OF THE DISPLAY
CAUTION
To clean the display, never use a
rough cloth, alcohol, benzine, thin-
ner, any kind of solvent, or paper
towel with chemical cleaning agent.
They will scratch or deteriorate the
panel.
Do not splash any liquid such as
water or car fragrance on the display.
Contact with liquid will cause the
system to malfunction.
If you need to clean the display screen, use a dry
soft cloth. If additional cleaning is necessary, use
a small amount of neutral detergent with a soft
cloth. Never soak the exterior with water or
detergent.
INV1744
HOW TO HANDLE THE DISPLAY
11-28
How do I adjust the display?
04.7.6/Z33-N
Page 178 of 202
1. Press the INFO button.
2. The [MAINTENANCE INFO.] screen will be
displayed.
3. To set the maintenance information for the
Engine Oil or Oil Filter, choose an item using
the joystick and press the PUSH ENTER
button.4. The [ENGINE OIL] screen will be displayed.
5. To reset, select the
RESET key.
6. Set the distance of the maintenance sched-
ule.
To determine the maintenance interval, refer to
the vehicle’s Owner’s Manual.
To automatically display the [MAINTENANCE
INFO.] screen when setting trip distance is
reached, select theDisplay Maintenance Notification
key and press the PUSH ENTER button.
INV1756
INV1750
MAINTENANCE INFORMATION12-2
How do I use the vehicle information?
04.7.6/Z33-N
Page 189 of 202
Symptom Possible cause Remedy
No image comes on. The brightness adjustment is at the lowest setting. Adjust the settings to make the display brighter.
No map comes on the screen. No map DVD-ROM is inserted, or it is inserted upside
down.Insert the DVD-ROM correctly.
The map display mode is switched off.
Press the
MAP
button.
No voice guide is available.
or
The volume is not high enough.The volume is not set correctly or turned off. Adjust the volume correctly.
The screen is too dim. The movement is slow. The temperature in the vehicle is low. Wait for the temperature in the vehicle to rise.
There are a few darker or brighter dots in the display. This is inherent to displays. This condition is a charac-
teristic of liquid crystal displays.This condition is not abnormal.
Stored location in the address book and other memory functions may be lost if the car’s battery is disconnected or becomes discharged for a long
time.
If this should occur, service the car’s battery as necessary and re-enter the address book information.BASIC OPERATIONS
Troubleshooting guide
14-3
04.7.6/Z33-N