buttons NISSAN FRONTIER 2008 D22 / 1.G 06IT Navigation Manual

Black plate (97,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
Editing/deleting a destination or way-
point
You can modify or delete the destination or
waypoint already set.
INFO:
If you modify or delete a location when a
suggested route is already set, the prior
suggested route will be recalculated accord-
ingly.
1. Push<ROUTE>.
2. Highlight [Edit] and push<ENTER>.
3. Highlight a destination or waypoint that is
already set and push<ENTER>.
4. Highlight [Move Dest.] to modify the location
and push<ENTER>.
“ADJUSTING THE LOCATION OF
THE DESTINATION” (page 4-25)
5. Highlight [Delete] and push<ENTER>to
delete the location.
6. A confirmation message is displayed. Con-
firm the contents of the message, highlight
[Yes] and push<ENTER>. The destination
or waypoint is deleted from the route.
INFO:
.If the destination is deleted, the final
waypoint of the route becomes the destina-
tion.
.Even if you touch the map screen or operate
the directional buttons other than the up or
down button, the same map screen as when
[Move Dest.] is selected is displayed.
Route guidance5-9

Black plate (99,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
CONFIRMING A ROUTE
When the suggested route is displayed after
calculation, you can confirm the route informa-
tion or simulate the suggested route.
Basic operation
1. Push<ROUTE>.
2. Highlight [Route Information] and push
<ENTER>.
3. Highlight the preferred item and push
<ENTER>.Available items:
.Turn List:
Displays the details of the suggested route.
“Using turn list” (page 5-11)
.Preview:
Allows you to confirm the suggested route
by scrolling the map.
“Using route preview” (page 5-12)
.Simulation:
Allows you to simulate the suggested route.
This function provides a detailed image of
the route with voice guidance.
“Confirming by simulation”
(page 5-12)
.Store Route:
A calculated route can be stored. A max-
imum of 5 routes can be stored. Stored
routes can be easily retrieved and set as the
suggested route.
“STORING A ROUTE” (page 6-5)
.Map Scroll:
Displays a map screen where you can
confirm the location of the destination.
Even if you touch the map screen or operate
the directional buttons other than the up or
down button, the same map screen as when
[Map Scroll] is selected is displayed.
Setting by voice command
1. Push<TALK>located on the steering
switch.
2. After the tone sounds, speak a command.
To display the route information:
“Route Information”
Using turn list
1. Highlight [Turn List] and push<ENTER>.
2. You can confirm the information (e.g., inter-
sections) on the route to the destination by
scrolling the screen using the up and down
switches of the main directional buttons or
the center dial.
3. Push<MAP>to return to the current
location map screen.
Route guidance5-11

Black plate (107,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
Visual guidance settings
The guidance screen can be displayed at all
times even when the vehicle is located away
from the guide point. You can choose which
screen is to be displayed.
1. Push<ROUTE>.
2. Highlight [Guidance Settings] and push
<ENTER>.
3. Highlight [Guidance Screen Default] and
push<ENTER>.
4. The indicator of the selected type of
guidance illuminates.Intersection Map:
The map screen and the enlarged intersection
view can be displayed at the same time.
INFO:
Push<MAP>to switch to the full map screen.
Turn list:
The list screen for showing the guide points to
the destination and the map screen can be
displayed at the same time. An enlargedintersection view is automatically displayed
when the vehicle approaches the guide point.
INFO:
.Turn list can be scrolled using the center dial
or the main directional buttons.
.Push<MAP>to switch to the full map
screen. Push<MAP>again to display the
turn list. When approaching a guide point,
the enlarged view of the intersection is
automatically displayed. To display the turn
list, push<MAP>. To display the map
screen, push<MAP>again.
Map:
The current location map is displayed. An
enlarged intersection view is automatically dis-
played when the vehicle approaches the guide
point.
Route guidance5-19

Black plate (108,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
INFO:
When an enlarged intersection view is dis-
played, you can return to the map screen by
pushing<MAP>.
Switching of required time display
The display of the travel time on the map screen
can be switched between the travel time to the
destination and the travel time to the waypoint.
Example: Switching the display to the travel time
to the waypoint
1. Push<ROUTE>.
2. Highlight [Guidance Settings] and push
<ENTER>.
3. Highlight [Estimated Travel Time] and push
<ENTER>.
4. Push the left or right directional buttons to
switch from “Dest.” to “Waypoint”.
5. Push<MAP>to return to the current
location map screen.
6. The icon displayed on the map screen is
switched, and the travel time to the waypoint
is displayed.
Displayed icon
: Display of the travel time to the
destination
: Display of the travel time to the
waypoint
Deactivating the information icon display
in the turn list
The display of information icons in the turn list
including the highway exits, junctions, and rest
areas can be deactivated.
1. Push<ROUTE>.
2. Highlight [Guidance Settings] and push
<ENTER>.
3. Highlight [Exit Info. on Turn List] and push
<ENTER>to turn off the indicator.
4. Push<MAP>to return to the current
location map screen.
5-20Route guidance

Black plate (110,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
3. Highlight [Voice Announcements] and push
<ENTER>.
4. Highlight [Twice] or [Three Times] and push
<ENTER>. The indicator for the selected
number of repetitions illuminates.
5. Push<MAP>to return to the current
location map screen.
Setting by voice command
1. Push<TALK>located on the steering
switch.
2. After the tone sounds, speak a command.
.To turn on voice guidance:
“Guidance Voice”
.To repeat voice guidance once:
“Guidance Voice Repeat”
Set average speeds
You can calculate the required time to the
destination based on the set vehicle speeds.
Basic operation:
1. Push<ROUTE>.
2. Highlight [Guidance Settings] and push
<ENTER>.
3. Highlight [Set Average Speeds] and push
<ENTER>.
4. Highlight the preferred item and push
<ENTER>.
5. Use the main directional buttons or the
center dial to make an adjustment. The
speed can be increased/decreased by 5
MPH (5 km/h) .
6. After finishing the setting, push<ENTER>
or<BACK>to activate the setting.
7. Push<BACK>to return to the previous
screen. Push<MAP>to return to the
current location map screen.Available setting items:
.Auto:
If set to ON, the system automatically
calculates the required time to the destina-
tion, the indicator illuminates and the speed
settings cannot be changed.
.Freeway:
Allows you to adjust the average vehicle
speed on a freeway by moving the main
directional buttons or the center dial in the
direction of [+] or [−].
.Main Road:
Allows you to adjust the average vehicle
speed on a main road by moving the main
directional buttons or the center dial in the
direction of [+] or [−].
.Town Road:
Allows you to adjust the average vehicle
speed on a town road by moving the main
directional buttons or the center dial in the
direction of [+] or [−].
.Residential:
Allows you to adjust the average vehicle
speed in a residential area by moving the
main directional buttons or the center dial in
the direction of [+] or [−].
.Reset:
Sets the average vehicle speeds to the
default values.
5-22Route guidance

Black plate (126,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
Setting by voice command
1. Push<TALK>located on the steering
switch.
2. After the tone sounds, speak a command.
To speak the stored voicetag:
“Play Address Book”
Icon
Changes the icon of the home or stored location
to the preferred one. By changing the icons, you
can utilize the [By Icon] option of the sort
function more effectively.
1. Highlight [Edit] and push<ENTER>.
2. Highlight [Icon] and push<ENTER>.
A list of icons is displayed.
3. Highlight the preferred icon by scrolling the
list using the main directional buttons or the
center dial. Then push<ENTER>.
6-12Storing a location/route

Black plate (128,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
Sound
Sets the tone of the arrival alarm that sounds
when the vehicle approaches the home or a
stored location.
1. Highlight [Edit] and push<ENTER>.
2. Highlight [Sound] and push<ENTER>.
A sound list is displayed.
3. Highlight the preferred alarm tone by scrol-
ling the list using the main directional
buttons or the center dial. Then push<ENTER>. The indicator of the selected
alarm tone illuminates.
Sound list:
None
Chime
Melody
Sound
Dog
Cat
Wave
Church bell
Music box 1
Music box 2
Marimba
Trumpet
Horn
Scratch
Direction
Sets the alarm to sound when approaching from
a specific direction.
1. Highlight [Edit] and push<ENTER>.
2. Highlight [Direction] and push<ENTER>.
The home or stored location is displayed at
the center of the map.
3. Set the direction that sounds the alarm
using the center dial or the left or right
button of the main directional buttons. Then
push<ENTER>. The selected direction is
set.
6-14Storing a location/route

Black plate (131,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
EDITING THE STORED ROUTE
1. Highlight[StoredRoutes]andpush
<ENTER>.
2. Highlight the preferred stored route and
push<ENTER>.
3. Push the right button of the main directional
buttons to select the Edit screen. The
setting items are highlighted.
4. Highlight the preferred item and push
<ENTER>.5. After finishing the setting, highlight [OK] and
push<ENTER>.
INFO:
If you select [None (Add New)], the system
stores the current route.
Available setting items:
.Rename:
Changes the name.
“CHARACTER (letter and number)
INPUT SCREEN” (page 2-20)
.Replace:
Overwrites the stored route to the current
route.
.Delete:
Deletes the stored route.
.OK:
Applies the settings.
EDITING THE STORED TRACKING
1. Highlight [Stored Tracking] and push
<ENTER>.
2. Highlight the preferred stored tracked route
and push<ENTER>. When the [Show]
indicator is not illuminated, push<ENTER>.
The indicator illuminates, and the Edit
screen is displayed.
If you push<ENTER>when the [Show]
indicator is illuminated, the indicator is
turned off.
Storing a location/route6-17

Black plate (134,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
2. Using the main directional or additional
directional buttons, adjust the location of
the Avoid Area.
3. After adjusting the location, push
<ENTER>.
Resize Area
Adjusts the range of the Avoid Area.
1. Highlight [Resize Area] and push
<ENTER>.
2. Select the range from 5 available levels.
After selecting the range, push<ENTER>.
INFO:
Push<ZOOM IN>or<ZOOM OUT>to
change the scale of the map.
FWY
Sets the route to avoid freeways.
1. Highlight [FWY].
If you want to include freeways in the Avoid
Area, push<ENTER>to illuminate this
indicator.
2. The Avoid Area is displayed in green if it
includes a freeway or in blue if it does not
include freeways.
INFO:
If you set an Avoid Area at the current
vehicle location, the system will not provideroute guidance.
Delete
Deletes the Avoid Area.
1. Highlight [Delete] and push<ENTER>.
2. A confirmation message is displayed. Con-
firm the contents of the message, highlight
[Yes] and push<ENTER>. The stored item
is deleted from the Address Book.
6-20Storing a location/route

Black plate (152,1)
Model "NAV2-N" EDITED: 2007/ 3/ 9
The navigation system can be customized to
make it easier for you to use.
BASIC OPERATION
1. Push<SETTING>.
2. Highlight the preferred setting item and
push<ENTER>.
Available setting items
.Display:“DISPLAY SETTINGS” (page 8-2)
.Audio:
Refer to the vehicle Owner’s Manual.
.Navigation:
Allows you to adjust various settings of the
navigation system.
“NAVIGATION SETTING” (page 8-4)
.Rear display:
Refer to the vehicle Owner’s Manual..Volume and Beeps:
“VOLUME ADJUSTMENT” (page 8-9)
.Phone:
Refer to the vehicle Owner’s Manual.
.Clock:
“CLOCK SETTINGS” (page 8-10)
.Comfort & Conv.:
This item is displayed when the ignition
switch is in the ON position.
Refer to the vehicle Owner’s Manual.
.Others:
— Voice Recognition:
“DISPLAYING HOW TO OPERATE
THE VOICE RECOGNITION SYS-
TEM” (page 9-2)
— Language/Unit:
“LANGUAGE AND UNIT SETTINGS”
(page 8-11)
INFO:
The displayed items vary depending on the
equipped options.This menu allows you to turn on and off the
display and adjust the image quality.
BASIC OPERATION
1. Push<SETTING>.
2. Highlight [Display] and push<ENTER>.
3. Highlight the preferred adjustment item and
push<ENTER>.
4. Use the main directional buttons or the
center dial to adjust to the preferred setting.
5. After setting, push<ENTER>or<BACK>
to apply the setting.
6. Push<BACK>to return to the previous
screen. Push<MAP>to return to the
current location map screen.
SETTINGS SCREEN DISPLAY SETTINGS
8-2Other settings