navigation NISSAN GT-R 2016 R35 Multi Function Display Repair Manual


> (GLW    0RGHO 51 @
2-52Navigation
3.Highlight [Map Settings] and push
<ENTER>.
4. Highlight [Show all Freeway Exits on Route]
or [Auto. Show Turn List on Freeway] and
push <ENTER>. The indicator illuminates
when the item is set.
5. Push <MAP> to return to the current
location map screen.
. Showing freeway exit information
When [Show all Freeway Exits on Route] is set
to ON and the route includes the freeway or toll road, all exits along the route which have exit
information will be shown in the turn list. The exit
information is shown as icons.
.
Displaying turn list automatically on
freeway
When [Auto. Show Turn List on Freeway] is set
to ON, the turn list will be automatically
displayed while the vehicle travels on a freeway
or toll road.
. Selecting a waypoint from the exit
information list
When exit information is displayed on the turn
list, a waypoint to a facility located near the
freeway exit can be set as a waypoint.
1. Highlight the exit where the exit information icon is displayed, and push <ENTER>. The
category list screen is displayed.
2. Highlight the landmark category and push <ENTER>. The list screen for showing
facilities located near the freeway exit is
displayed.
&RQGLWLRQ /DQJXDJH 1$0B(QJOLVK


> (GLW    0RGHO 51 @
3. Highlight the preferred facility for the way-point and push <ENTER>.
4. The waypoint is set, and the route search is
performed.
ªProcedures after setting destinationº
(page 2-44)
ROUTE SCREEN
WARNING
Always stop the vehicle in a safe
location before modifying the route
conditions.
Modifying the route conditions while
driving may cause an accident.
During route guidance, the route conditions can
be modified and the route information can be
confirmed. Set route conditions according to
personal preference.
Basic operation
1. Push <ROUTE VOICE>.
2. Highlight the preferred setting item and
push <ENTER>. 3.
Push <MAP> to return to the current
location map screen.
Available setting items
. [Cancel Route/Resume Route]:
Cancels the current route guidance. A
canceled route can also be reactivated. If
the suggested route is canceled, [Cancel
Route] changes to [Resume Route].
ªCanceling/reactivating routeº
(page 2-54)
. [Edit/Add to Route]:
Edit or add a destination or waypoints to the
route that is already set.
ªEditing routeº (page 2-55)
. [Route Info]:
Confirm the route by the route information or
simulation. The confirmed route can also be
stored.
ªConfirming routeº (page 2-60)
. [Guidance Settings]:
Activates or deactivates route, voice gui-
dance and/or traffic announcement and
adjust the volume level of voice guidance.
ªGuidance settingsº (page 2-61)
. [Recalculate]:
Manually search for the route again after
changing the search condition and have the
system calculate a route.
Navigation2-53
&RQGLWLRQ /DQJXDJH 1$0B(QJOLVK


> (GLW    0RGHO 51 @
2-54Navigation
ªRecalculate routeº (page 2-62)
. [Detour]:
A detour of a specified distance can be
calculated.
ªSetting detour routeº (page 2-63)
. [Traffic Detour]:
Manually search for an alternative detour
route taking the traffic information into
consideration.
ªSearching for detour route taking
traffic information into considerationº
(page 2-63)
. [Route Settings]:
Changes the route calculation conditions
anywhere along the route.
ªSetting conditions for route calcula-
tionº (page 2-65)
Canceling/reactivating route
A route that is already set can be canceled at
any time. If a route is deleted, the destination
and waypoints are also canceled.
It is also possible to reactivate a canceled route.
INFO:
Canceling a route does not delete the destina-
tion and waypoint information completely. To
delete the destination and waypoints completely.
ªDelete destinationº (page 2-43)
Canceling route:
1. Push <ROUTE VOICE>.
2. Highlight [Cancel Route] and push
<ENTER>.
3. A confirmation message is displayed.
Highlight [Yes] and push <ENTER>.
The route is canceled along with the
destination and waypoints.
Setting by voice command
1. Push <
>located on the steering wheel.
2. After the tone sounds, speak a command.
To cancel a route:
ªCancel Routeº (Alternate Command Mode)
&RQGLWLRQ /DQJXDJH 1$0B(QJOLVK


> (GLW    0RGHO 51 @
Reactivating route:
1. Push<ROUTE VOICE>.
2. Highlight [Resume Route] and push
<ENTER>.
3. A confirmation message is displayed. High-
light [Yes] and push <ENTER>. The can-
celed route is reactivated.
INFO:
If a new route is set, the canceled route cannot
be reactivated.
Editing route
1. Push <ROUTE VOICE>.
2. Highlight [Edit/Add to Route] and push
<ENTER>.
3. Highlight the preferred condition and push <ENTER>.
4. Push <BACK> to return to the previous
screen. Push <MAP>to return to the
current location map screen.
Available setting items
*1Adds a destination.ªSetting destination or waypointº
(page 2-56)
*2Current destination:
Changes or deletes the destination.
ªEditing/deleting destination or waypointº
(page 2-57)
*3Condition for calculating a route to the destina-
tion:
Changes the conditions for calculating a route to
the destination.
ªChanging route calculation conditionsº
(page 2-59)
*4Adds a waypoint.ªSetting destination or waypointº
(page 2-56)
*5Current waypoint:
Changes or deletes the waypoint.
ªEditing/deleting destination or waypointº
(page 2-57)
Navigation2-55
&RQGLWLRQ /DQJXDJH 1$0B(QJOLVK


> (GLW    0RGHO 51 @
2-56Navigation
*6Condition for calculating a route to a waypoint:
Changes the conditions for calculating a route to
a waypoint.
ªChanging route calculation conditionsº
(page 2-59)
*7[Calculate]:
Manually search for the route again after chan-
ging the search conditions and have the system
calculate a route.
ªChanging route calculation conditionsº
(page 2-59)
Setting destination or waypoint:
A destination or waypoint can be added to the
route that has already been set. A total of 6
destinations or waypoints can be set.
1. Push<ROUTE VOICE>.
2. Highlight [Edit/Add to Route] and push
<ENTER>. 3. Highlight [Add Destination] or [Add Way-
point] and push <ENTER>.
If [Add Destination] is selected, the current
destination changes to a waypoint.
4. Set a destination or waypoint. The method of searching for a destination or waypoint is the
same as the one for a destination.
ªSetting destinationº (page 2-23)
5. The selected location is displayed at thecenter of the map. Highlight [Add to Route]
after confirming the location and push <ENTER>.
INFO:
Even after setting a destination/waypoint,
the destination/waypoint location can be
adjusted, the route can be stored, etc.
ªEditing/deleting destination or way-
pointº (page 2-57)
6. Return to the [Edit Route] screen. Set the route conditions as necessary.
7. Highlight [Calculate] and push <ENTER>.
The system will recalculate the routes. After
the route search is completed, the display
will automatically return to the current
location map screen.
&RQGLWLRQ /DQJXDJH 1$0B(QJOLVK


> (GLW    0RGHO 51 @
INFO:
. The prior route is automatically deleted.
. Added waypoints and search conditions will
not be taken into consideration for the route
calculation until [Calculate] is highlighted
and <ENTER> is pushed.
Editing/deleting destination or waypoint:
The destination or waypoint that has already
been set can be modified or deleted.
If a location is modified or deleted when a
suggested route is already set, the prior
suggested route will be recalculated accord-
ingly.
1. Push <ROUTE VOICE>.
2. Highlight [Edit/Add to Route] and push
<ENTER>. 3. Highlight a destination or waypoint that is
already set and push <ENTER>.
4. Highlight [Move Dest.] to modify the location
and push <ENTER>.
ªMoving location of destinationº
(page 2-46)
5. Highlight [Delete] and push <ENTER>to
delete the location.
6. A confirmation message is displayed. Con- firm the contents of the message, highlight
[Yes] and push <ENTER>. The destination
or waypoint is deleted from the route. Return
to the [Edit Route] screen.
7. By highlighting [Calculate] and pushing
<ENTER>, the system will recalculate the
routes. After the route search is completed,
the display will automatically return to the
current location map screen.
Navigation2-57
&RQGLWLRQ /DQJXDJH 1$0B(QJOLVK


> (GLW    0RGHO 51 @
2-58Navigation
INFO:
. If the destination is deleted, the final
waypoint of the route becomes the destina-
tion.
. Even if the map screen is touched, the same
map screen as when [Move Dest.] is
selected is displayed.
Changing order of destination and way-
points:
The order of a destination and waypoints that
have already been set can be changed.
1. Push <ROUTE VOICE>.
2. Highlight [Edit/Add to Route] and push
<ENTER>.
3. Highlight a destination or waypoint that is already set and push <ENTER>.
4.Highlight [Change Order] and push
<ENTER>. A list of the destination and
waypoints is displayed.
5. Highlight a preferred destination or waypoint
to replace the previously selected destina-
tion or waypoint and push <ENTER>.
6. A message is displayed and the order of the
destination or waypoint is changed.
7.By highlighting [Calculate] and pushing
<ENTER>, the system will recalculate the
routes. After the route search is complete,
the display will automatically return to the
current location map screen.
&RQGLWLRQ /DQJXDJH 1$0B(QJOLVK


> (GLW    0RGHO 51 @
Changing route calculation conditions:
Each section of the route between waypoints
can have different route calculation conditions.
After setting these conditions, the entire route
can be recalculated.
1. Push<ROUTE VOICE>.
2. Highlight [Edit/Add to Route] and push
<ENTER>.
3. Highlight the preferred section of the route to the destination or waypoint and push
<ENTER>.
4. Highlight the preferred condition and push<ENTER>.
Available conditions
: [Fastest Route]
:[Minimize Freeway]
: [Shortest Route]
5. The conditions have been changed and the
display returns to the [Edit Route] screen.
6.By highlighting [Calculate] and pushing
<ENTER>, the system will recalculate the
routes. After the route search is completed,
the display will automatically return to the
current location map screen.
INFO:
. The recalculated route may not be the
shortest route because the system priori-
tizes roads that are easy to drive for safety
reasons.
. If the route conditions are set from [Route
Settings], all sections in the route are
subject to the same route conditions. This
applies even if different route conditions
have been set for different sections in [Edit
Route].
Navigation2-59
&RQGLWLRQ /DQJXDJH 1$0B(QJOLVK


> (GLW    0RGHO 51 @
2-60Navigation
Confirming route
When the suggested route is displayed after
calculation, the route information can be con-
firmed or the suggested route can be simulated.
Basic operation:
1. Push<ROUTE VOICE>.
2. Highlight [Route Info] and push <ENTER>.
3.Highlight the preferred item and push
<ENTER>. Available setting items
.
[Turn List]:
Displays the details of the suggested route.
ªUsing turn listº (page 2-60)
. [Preview]:
The system will trace the planned route
going forward or in reverse.
ªUsing route previewº (page 2-60)
. [Simulation]:
Displays a simulation of the suggested
route. This function provides a detailed
image of the route with voice guidance.
ªConfirming route by simulationº
(page 2-61)
. [Store Route]:
Stores a calculated route. A maximum of 5
routes can be stored. Stored routes can be
easily retrieved and set as the suggested
route.
ªStoring routeº (page 2-73)
. [Map Scroll]:
Displays a map screen where the location of
the destination can be confirmed.
Even if the map screen is touched, the same
map screen as when [Map Scroll] is
selected is displayed. Using turn list:
1. Highlight [Turn List] and push
<ENTER>.
2. The information (e.g., intersections) can be confirmed on the route to the destination by
scrolling the screen using the center dial.
3. Push <MAP> to return to the current
location map screen.
Using route preview:
&RQGLWLRQ /DQJXDJH 1$0B(QJOLVK


> (GLW    0RGHO 51 @
1. Highlight [Preview] and push<ENTER>.
2. Highlight the preferred key and push
<ENTER>.
: Moves forward in the direction of the
destination.
: Moves backward in the direction of thestarting point.
/: Pauses the route preview.
3. Push <MAP> to return to the current
location map screen.
Confirming route by simulation:
1. Highlight [Simulation] and push <ENTER>.
2. Highlight the preferred key and push
<ENTER>.
: Pauses the simulation.
: Resumes the simulation.
: Ends the simulation.
3.Push <MAP> to return to the current
location map screen.
Guidance settings
Various guidance settings can be set.
Basic operation:
1. Push <ROUTE VOICE>.
2. Highlight [Guidance Settings] and push
<ENTER>.
3. Highlight the preferred item and push
<ENTER>.
4. Push <BACK> to return to the previous
screen. Push <MAP>to return to the
current location map screen.
Available setting items
. [Guidance Voice]:
Activates or deactivates voice guidance. The
indicator illuminates if voice guidance is
activated.
. [Guidance Volume]:
Adjusts the volume level of voice guidance.
. [Traffic Announcement]:
Provides the announcement of a traffic
information event on the route.
Setting by voice command
1. Push <
>located on the steering wheel.
2. After the tone sounds, speak a command.
Navigation2-61
&RQGLWLRQ /DQJXDJH 1$0B(QJOLVK