reset NISSAN MAXIMA 2003 A33 / 5.G Navigation Manual

Route Infokey:
Displays the route to the destination. There are
three types of display methods.
Complete Routekey:
Displays all the routes from the current lo-
cation to the destination.
Please refer to “Displaying the complete
route to the destination” on page 11-8.
T urn Listkey:
Displays a list of the guidance points in all
the routes to the destination on a simple
map.
Please refer to “Displaying turn list” on
page 11-9.
Route Simulationkey:
Performs a simulation drive on the map
screen by moving a vehicle icon on all the
routes from the current location to the des-
tination.Please refer to “Requesting the simulation
drive to the destination” on page 11-10.
Detourkey:
When the route is congested with traffic, a de-
tour can be calculated using various distances.
Please refer to “Detouring from the route tem-
porarily” on page 9-4.
Edit Routekey:
Resets the set destination (waypoint).
Please refer to “Making the system guide the
route with detailed options” on page 5-17.
Keys that appear when the map
is scrolled with the joystick
Y ou can scroll the map display and get infor-
mation about the area near your vehicle and the
destination using the joystick.
INFO:

This function can be used when the originalmap disc is inserted.

Y ou can operate this with the map display
on.

This function cannot be used when the sys-
tem is calculating the route or drawing the
screen.
Store Placekey:
Y ou can store the location with the cross
pointer .
Please refer to “Storing current vehicle posi-
tion” on page 7-3.
Destinationkey:
Y ou can store the position to the destination,
using the cross pointer . The maximum number
of destinations is six, and the last one stored
will be the final destination. (# will appear on
the map to denote the selected locations from
1 to 6.) Please refer to “Making the system
guide the route with detailed options” on page
5-15.
HOW DO I OPERATE THE NISSAN NAVIGATION SYSTEM?
4-9

may not be possible.

The following may occur when the route is
being displayed.
— Even if you are requesting calculation from
the main road, the origin of the route may
not exactly match the current vehicle posi-
tion.
— Even if you are requesting calculation to the
destination on the main road, the end of the
route may not exactly match the destination.
— Even if you are requesting calculation from
the main road, the system may show a route
from another main road. This may be be-
cause the icon to show the current vehicle
position (vehicle icon) is not set accurately .
In that case, park the car in a safe place and
reset the vehicle icon, or continue driving
to see if the vehicle icon appears on the
main road before requesting route calcula-
tion again.
— There are cases in which the system showsa detoured route to reach the destination or
waypoints, if you set them from memory or
facility information. In order to correct this,
you will have to be careful about the traffic
direction, especially when the lanes with
different travel directions are shown sepa-
rately . Such places are interchanges and
service areas.
— This system makes no distinction between
limited traffic control and total control
(blockage). It may show a detoured route
even if the road is usable.
— Even if the freeway preference is set to OFF ,
the route may be set on them. T o avoid this,
set a waypoint on another road type and re-
quest calculation.
— Even if the preference is set as OFF for a
ferry line, the route may be set on it. T o
avoid this, set a waypoint on a road and re-
quest calculation.
— Ferry lines, except those which accept onlypedestrians, bicycles and motorcycles, are
stored in this system. When using them,
take into consideration the travel time re-
quired and operational condition to decide
whether to use them or not.
ABOUT THE DISPLAY ERROR
The following cases may affect the display ac-
curacy of the vehicle’s position or travel direc-
tion. The accuracy will return to normal if the
driving conditions return to normal.
— When there is a similar road nearby .
— When the vehicle is traveling on a long
stretch of straight road or series of curves
with a large radius.
— When the vehicle is traveling in an area with
a checkerboard road system.
— When the vehicle is making consecutive S
curves.
— When the vehicle is at a large Y -shaped
junction.
HOW DO I OPERATE THE NISSAN NAVIGATION SYSTEM?
4-15

6. T o delete the destination (waypoint),
choose the destination (waypoint) in step 3
and select the
Delete key .7. Select the
Y es key .
The pre-set destination (waypoints) will be de-
leted.8. Press the Map button to return to the map
screen.
INFO:

T o set a new destination (waypoints), refer
to “Seven categories” on page 5-2.

If you reset the new destination (waypoints),
the older destination (waypoints) will be de-
leted. If you have requested a route calcu-
lation, the previous suggested route will be
deleted from memory .
INV0350INV0351INV0352
HOW DO I PROGRAM A DESTINATION?
5-25

ROUTE CALCULATION
Symptom Possible cause Remedy
Although the system is set with the moving di-
rection as the preference, it does not find the
route by matching the preference.There is no route found in that direction. This is not abnormal.
Route is not indicated. There is no road that can be found by this sys-
tem close to the destination.Reset the destination close to the road dis-
played with orange, or wider ones. Especially
with roads which have separate lanes for op-
posite directions, be careful in setting the desti-
nation or waypoints on it, because results may
differ depending on the lane you choose.
The starting point to the destination is too
close.Set more distant destinations.
The route is not displayed continuously at
waypoints, for example, that are not calculated
route from the vehicle’s current position.Suggested routes may be displayed discontinu-
ously near waypoints as route calculation is
done at each waypoint.This is not abnormal.
The suggested route the vehicle has traveled
is erased.Suggested routes are stored in memory by the
blocks; ifthe vehicle travels past waypoint 1,
the former data will be erased.This is not abnormal.
TROUBLESHOOTING GUIDE
15-9