set clock NISSAN PULSAR 2015 Owners Manual


> (GLW   0RGHO &$@
MANUAL AIRCONDITIONER
GUID-B9 F02A01-74 43-43F7-84E C-9EEBAFE5 A528
JVH0499X
1. Airintake lever(Outside aircirculation ª
º
/Air recirculation
ª
º)
2. Airflow control dial
3. Fanspeed control
ª
º dial
4. ªA/Cº (AirConditioner) button
5. Temperature controldial
6. Rear defogger
ª
º button (SeeªDefogger
switchº (P.2-21) .)
T o turn offthe heater andairconditioner, turnthefan
speed control ª
º dial tothe ªOFFº (0)position.
Controls
GUID-3B92B 3BB-498F-4734-93D4 -D381D317DF19
Outside aircirculation:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Move theairintake levertothe ª
º position. Theair
flow isdrawn fromoutside thevehicle.
Air recirculation:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Move theairintake levertothe ª
º position. Theair
flow iscirculated insidethevehicle. Air
flow control:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
T urn theairflow control dialtochange theairflow
mode.
Ð Airflows fromthecenter andside
ventilators.
Ð Airflows fromthecenter andside
ventilators andfoot
outlets.
Ð Airflows mainly fromthefoot outlets.
Ð Airflows fromthefront defogger andfoot
outlets.
Ð Airflows mainly fromthefront defogger
outlets.
Fan speed control:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
T urn thefanspeed control ª
º dial clockwise to
increase thefanspeed.
T urn thefanspeed control ª
º dial counterclock -
wise todecrease thefanspeed. A/C
(AirConditioner) operation:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Push theªA/Cº button toturn onoroff the air
conditioner. Whentheairconditioner ison, the ªA/Cº
indicator lightonthe button illuminates.
T emperature control:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
T urn thetemperature controldialtoset the desired
temperature. Turn thedial between themiddle andthe
right position toselect thehot temperature. Turn the
dial between themiddle andtheleftposition toselect
the cool temperature.
Heater operation
GUID-ED0 DE5AF-669 2-440D-A937 -F37C2F707C77
Heating:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
This mode isused todirect heated airtothe foot
outlets.
1. Move theairintake levertothe ª
º position for
normal heating.
2. Turn theairflow control dialtothe ª
º position.
3. Turn thefanspeed control ª
º dial tothe
desired position.
4. Turn thetemperature controldialtothe desired
position between themiddle andthehot (right)
position.
V entilation:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
This mode directs outside airtothe side andcenter
ventilators.
1. Move theairintake levertothe ª
º position.
2. Turn theairflow control dialtothe ª
º position.
3. Turn thefanspeed control ª
º dial tothe
desired position.
4. Turn thetemperature controldialtothe desired
position.
Heater andairconditione r,and audio system
4-7
&RQGLWLRQ

 
> (GLW   0RGHO &$@
FM-AM RADIOWITHCOMP ACTDISC (CD)PLAYER
GUID-383 F18A5-23D 3-4216-8157-B74B41A1C E89
JVH0333X
1. SEEK/TRACK/Rewind button
2. SEEK/TRACK/Fast Forwardbutton
3. CDEJECT button
4. Display
5. Radio memory buttons
6. SCAN button
7. DISP (Display) button
8. RPT(Repeat)´RDM (Random)button 9.
VOL(Volume)/P owerbutton
10. FMbutton
11. AMbutton
12. CDbutton
13. AUX(Auxiliary) button
14. AUX(Auxiliary) INjack
15. TUNE´FOLDER/MENU button
Audio mainoperation
GUID-FF9B 23C7-C1D9-4522-B9C 1-E91B3696951F
The audio system operates whentheignition switchis
in the ªACCº orªONº position.
POWER ON/OFF:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
T o turn onthe audio system, pushtheVOL/P ower
button.
. Thesystem willturn oninthe mode (radio orCD)
which wasused immediately beforethesystem
was turned off.
. Ifno CD isloaded, theradio willbeturned on.
T o turn onand offthe audio system, pushtheVOL/
P ower button.
V olume control:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
T o control thevolume, turntheVOL/P owerbutton.
T urn theVOL/P owerbutton clockwise toincrease the
volume.
T urn theVOL/Pow erbutton counterclockwise to
decrease thevolume.
Adjusting soundpreference:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
1. To adjust thesound settings, pushtheTUNE´-
FOLDER/MENU buttonuntiltheitem (Bass,
T reble, Balance, Fade,SpdsenVol (speed
sensitive volume)orAUX INVolume) tobe
adjusted isdisplayed.
2. Turn theTUNE´FOLDER/MENU buttontoadjust
the settings.
When noaction istaken for5seconds, thedisplay will
automatically returntothe original mode.
Heater andairconditioner ,and audio system
4-19
&RQGLWLRQ

 
> (GLW   0RGHO &$@
4-20
Heater andairconditione r,and audio system
Clock setting:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
T urning theclock ON/OFF:
1. Push theTUNE´FOLDER/MENU buttonuntil
ªClock: ONºorªClock: OFFºisdisplayed.
2. Turn theTUNE´FOLDER/MENU buttontotoggle
between ªClock:ONºandªClock: OFFº.
Adjusting theclock:
1. Turn onthe clock.
2. Push theTUNE´FOLDER/MENU buttonuntil
ª Adjust Clock: Noºisdisplayed.
3. Turn theTUNE´FOLDER/MENU buttonuntilªAd-
just Clock: Yesº isdisplayed.
4. Adjust thehour digits byturning theTUNE´-
FOLDER/MENU buttonwhilethedigits areflash-
ing and ªChange Hourºisdisplayed.
5. Push TUNE´FOLDER/MENU button.Adjustthe
minutes byturning theTUNE´FOLDER/MENU
button whilethedigits areflashing andªChange
Minuteº isdisplayed.
When noaction istaken for5seconds, thedisplay will
automatically returntothe original mode.
AUX button:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
The AUX INjack islocated onthe audio unit.The
IN audio inputjackaccepts anystandard analogaudio
input suchasfrom aportable cassette tapeplayer, CD
player, digitalaudioplayer orlaptop computer.
Push theAUX button toplay acompatible devicewhen
it is plugged intotheAUX INjack.
NISSAN stronglyrecommends usingastereo mini
plug cable whenconnecting yourmusic device tothe
audio system. Musicmaynotplay properly whena
monaural cableisused.
Radio operation
GUID-13A4 72C1-417E-4 046-AABD-E47CCD5 38998
The audio system operates whentheignition switchis
in the ªACCº orªONº position.
/
FM/AM buttons:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
When the
/
button ispushed whiletheaudio
system isoff, the audio system willturn onand the
radio willturn on.
When the
/
button ispushed whileanother
audio source isplaying, theother audio source willturn
off and theradio willturn on.
T o change theradio bands (FM1,FM2,orAM) ,push
the
/
buttons.
TUNE´FOLDER/MENU button:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
When adjusting thebroadcasting stationfrequency
manually ,turn theTUNE´FOLDER/MENU buttonuntil
the preferred frequency isachieved.
SEEK/TRACK buttons:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
T o adjust thebroadcasting stationfrequency auto-
matically ,push andrelease the
or
button.
When thesystem detects abroadcasting station,itwill
stop atthe station.
Detected stationsareskipped while
or
button ispushed andheld.
SCAN button:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
When the
button ispushed, thesystem willseek
and stop atthe detected broadcasting stationfor5
seconds, andthen itwill start toseek forthe next
broadcasting station.
Push the
button inthis 5-second periodtostop
seeking.
*
1
*
2
*
3
*
4
*
5
*
6
Radio memory buttons:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
The audio system canstore upto12 FM station
frequencies (forFM1 andFM2) and6AM station
frequencies.
During radioreception, pushingtheradio memory
button forless than 1.5seconds willplay thestored
radio station.
T o store thestation frequency manually:
1. Tune tothe desired broadcasting stationfre-
quency usingthe
buttons.
2. Push andhold oneofthe radio memory buttons
*
1
-
*
6
until abeep sounds.
3. Thefrequency ofthe selected channelwillappear
on the display whenthememory isstored
properly .
4. Perform steps1-3 for allother memory buttons.
CD player operation
GUID-8F214 3D0-16A1-4ACF-95FC-4B 6DCF54F1C8
Loading:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Insert aCD into theslot with thelabel sidefacing up.
The CDwillbeguided automatically intotheslot and
will start playing. Afterthedisc isloaded, track
information willappear onthe display .
CAUTION:
Do not force theCDinto theslot. Thiscould
damage theplayer.
CD button:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
When the
button ispushed whileaCD isloaded,
the CD willstart playing.
&RQGLWLRQ

 
> (GLW   0RGHO &$@
Audio mainoperation
GUID-1AAF6 8DA-BD5F-49DD-BB10-110C903AE ED1
Head unit:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
The auto loudness circuitenhances thelow and high
frequency rangesautomatically inboth radio reception
and CDplayback.
PWR/V olumecontrol:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Place theignition switchinthe ACC orON position,
and then push thePWR button whilethesystem isoff
to turn onthe last audio source, whichwasplaying
immediately beforethesystem wasturned off.While
the system ison, pushing thePWR button turnsthe
system off.
T urn theVOL control knobtoadjust thevolume.
SETTING:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
The settings screenwillappear whenpushing the
ENTER/SETTING button.
The following itemsareavailable inthe settings screen.
. Bass, Treble, Balance andFade
Controls thesound ofthe audio system. Balance
adjusts thesound between theleftand right
speakers. Fadeadjusts thesound between the
front andrear speakers.
Select theªBassº ,ªT rebleº ,ªBalanceº orªFadeº
using theTUNE´FOLDER controlknobandthen
push theENTER/SETTING button.Turn the
TUNE´FOLDER controlknobtoadjust theBass,
T reble, balance andFade ofthe screen tothe
preferred level.
. Speed SensVol.
T o change theSpeed Sensitive Volume (Speed
Sens Vol.) level fromoff(0) to5,turn the
TUNE´FOLDER controlknob. .
AUX Vol.
Controls thevolume levelofincoming soundwhen
an auxiliary deviceisconnected tothe system.
Choose asetting between 1and 3or choose 0to
disable thefeature entirely.
. Brightness andContrast
Adjust thebrightness andcontrast ofthe screen.
Select theªbrightnessº orªcontrastº usingthe
TUNE´FOLDER controlknobandthen push the
ENTER/SETTING button.Turn theTUNE´FOLDER
control knobtoadjust thebrightness andcontrast
of the screen tothe preferred level.
. Clock Adjust
Adjust theclock according tothe following procedure.
JVH0306X
1) Select ªClock Adjustº usingtheTUNE´-
FOLDER controlknob
*
1
and then push
the ENTER/SETTING button
*
2
.
2) Adjust thehour withtheTUNE´FOLDER
control knob
*
1
and then push theENTER/
SETTING button
*
2
.
3) Adjust theminute withtheTUNE´FOLDER
control knob
*
1
and then push theENTER/
SETTING button
*
2
. 24
hour clock isnot available.
. On-Screen Clock
When thisitem isturned on,aclock isalways
displayed inthe upper rightcorner ofthe screen.
Select theªOn-Screen ClockºusingtheTUNE´-
FOLDER controlknobandthen push theENTER/
SETTING button.You can toggle between ON
and OFF using theTUNE´FOLDER controlknob.
. RDS Display (ifequipped)
RDS (radio datasystem) information canbe
shown onthe display .Select ªRDSDisplayº using
the TUNE´FOLDER controlknobandthen push
the ENTER/SETTING button.You can toggle
between ONand OFF using theTUNE´FOLDER
control knob.
. iPod Menu language
The iPod menu language canbechanged.
Select ªiPod menu languageº usingtheTUNE´-
FOLDER controlknobandthen push theENTER/
SETTING button.UsetheTUNE´FOLDER control
knob toselect thepreferred language.
DISP:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
Display ofthe screen canbecanceled bypushing the
DISP button. You can then listen tomusic thatisbeing
played back.Ifyou want todisplay thescreen again,
either pushtheDISP button oncemore orpush the
FM´AM orAUX button.
AUX INjack:
GUID-9E14C2 E6-2E9C-4731-980B-C45B899B9 77B
The AUX INjack islocated onthe audio unit.TheAUX
IN audio inputjackaccepts anystandard analogaudio
input suchasfrom aportable cassette tape/CD player,
MP3 player orlaptop computer.
NISSAN stronglyrecommends usingastereo mini
plug cable whenconnecting yourmusic device tothe
Heater andairconditioner ,and audio system
4-23
&RQGLWLRQ


> (GLW   0RGHO &$@
STEERING LOCK
GUID-84FC5F 17-E3C7-4BE1-842B-2 338DC8B9E85
T o lock steering wheel
GUID-643 D9CDC-84 45-49BB-8146-1F81F862C0B9
1. Turn theignition switchtothe ªLOCKº position.
2. Remove thekey from theignition switch.
3. Turn thesteering wheel1/6ofaturn clockwise
from thestraight upposition.
T o unlock steering wheel
GUID-F9918 49F-1987-47 3E-AFAD-235CD 32C3712
1. Insert thekey into theignition switch.
2. Gently turntheignition switchwhilerotating the
steering wheelslightly rightandleft.
KEY POSITIONS
GUID-95C A75D5-0D2E -4FAF-BC0 D-63E3D92 C30B8
L OCK (0)
GUID-144 974C4-67B 8-4F45-92DA- 6954532EDEFE
The ignition keycan only beremoved atthis position.
The steering lockcanonly belocked atthis position.
OFF (1)
GUID-54 D824D0-1B74 -4475-84F5-CA80FB23D19C
The engine isturned offwith thesteering wheel
unlocked.
ACC (2)
GUID-17 E1619A-16C2 -4F88-A958-D19A38830 78C
The electrical accessory poweractivates withoutthe
engine turnedon.
ON (3)
GUID-8FAE5841-E613-460B-A9 14-0927C1C5B9A6
The ignition systemandtheelectrical accessory power
activate withouttheengine turnedon.
ST ART (4)
GUID-16D 5423F-AB9 6-440A-A9B2 -60948BDBB14C
The engine starteractivates andtheengine willstart.
The ignition switch,whenreleased, willautomatically
turn tothe ªONº position.
CAUTION:
As soon asthe engine hasstarted, releasethe
ignition switchimmediately.
GUID-8D8 CC42A-947 4-401D-AE63-E7B674 B40563
PRECAUTIONS ONPUSH-BUTT ONIGNI-
TION SWITCHOPERA TION
GUID-135 62CA9-9E1 B-4EA6-B47 6-DA4BA15F7D32
WARNING:
Do not operate thepush-button ignitionswitch
while driving thevehicle exceptinan emergency.
(The engine willstop when theignition switchis
pushed 3consecutive timesorthe ignition
switch ispushed andheld formore than2
seconds.) Thesteering wheelwilllock andcould
cause thedriver tolose control ofthe vehicle.
This could result inserious vehicledamage or
personal injury.
Before operating thepush-button ignitionswitch,be
sure tomove theshift lever tothe ªPº (Park) position
(for Continuously Variable Transmission model)orthe
shift lever tothe ªNº (Neutral) position(forManual
T ransmission model).
INTELLIGENT KEYSYSTEM
GUID-771FA3AD-C30C-4693-9 8E4-B9AE610D746B
The Intelligent Key system canoperate theignition
switch without takingthekey outfrom yourpocket or
bag. Theoperating environment and/orconditions may
affect theIntelligent Key system operation.
CAUTION:
. Besure tocarry theIntelligent Keywith you
when operating thevehicle.
. Never leavetheIntelligent Keyinside the
vehicle whenyouleave thevehicle.
. Ifthe vehicle battery isdischarged, the
ignition switchcannot beswitched from
the ªLOCKº position, andifthe steering lock
is engaged, thesteering wheelcannot be
moved. Chargethebattery assoon as
Starting anddriving
5-5
PUSH-BUT
TON IGNITION SWITCH
(model withIntelligent Keysystem)
&RQGLWLRQ


> (GLW   0RGHO &$@
6-4
In case ofemergency
SCE0504
WARNING:
. Besure toread andfollow theinstructions in
this section.
. DO NOTGET UNDER AVEHICLE THATIS
SUPPORTED BY A JACK .
. Never useajack which isnot provided with
your vehicle.
. The jack, which isprovided withyour vehicle,
is designed onlytolift your vehicle duringa
tire change. Donot use thejack provided
with your vehicle onother vehicles.
. Never jackupthe vehicle atalocation other
than thejack -uppoint thatisspecified.
. Never liftthe vehicle morethannecessary.
. Never useblocks onorunder thejack.
. Never startorrun theengine whilethe
vehicle ison the jack. Thevehicle maymove
suddenly, andthismay cause anaccident.
. Never allowpassengers toremain inthe
vehicle whilethetire isoff the ground. .
Besure toread thecaution labelattached to
the jack body before using.
1. Place thejack directly underthejack-up point as
illustrated sothat thetop ofthe jack contacts the
vehicle atthe jack-up point.
The jack should beplaced onfirm level
ground.
2. Align thejack head between thetwo notches
located atthe jack-up point ofeither thefront or
the rear section.
3. Fitthe groove ofthe jack head between the
notches asshown.
4. Loosen eachwheel nut,counterclockwise, oneor
two turns withthewheel nutwrench.
Do not remove thewheel nutsuntil thetire is
off the ground.
5. Carefully raisethevehicle untiltheclearance
between thetireand ground isachieved.
6. To lift the vehicle, securely holdthejack lever and
rod with both hands andturn thejack lever.
Removing tire
GUID-972 115C8-16B 3-429F-9DF 1-CC69110A0 0AF
1. Remove thewheel nuts.
2. Remove thedamaged tire.
CAUTION:
The tireisheavy. Besure thatyour feetareclear
from thetire and usegloves asnecessary to
avoid injury.
INST ALLING SPARE TIRE
GUID-028 A15EE-D4 CA-4435-AF C6-94D3C9E C3071
SCE0039
WARNING:
. Never usewheel nutswhich arenot provided
with your vehicle. Incorrect wheelnutsor
improperly tightenedwheelnutsmaycause
the wheel tobecome looseorcome off.This
could cause anaccident.
. Never useoilorgrease onthe wheel studs
or nuts. Thismaycause thewheel nutsto
become loose.
1. Clean anymud ordirt from thesurface between
the wheel andhub.
&RQGLWLRQ