NISSAN TEANA 2003 Service Manual

IPDM E/R (INTELLIGENT POWER DISTRIBUTION MODULE ENGINE ROOM)
PG-27
C
D
E
F
G
H
I
J
L
MA
B
PG

Inspection With CONSULT-II (Self-Diagnosis)BKS0024W
CAUTION:
If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be
detected in self-diagnosis depending on control unit which performs CAN communication.
1. CHECK SELF DIAGNOSTIC RESULT
1. Connect CONSULT-II and select “IPDM E/R” on “SELECT SYSTEM” screen.
2. Select “SELF-DIAG RESULTS” on the “SELECT DIAG MODE” screen.
3. Check display content in self diagnostic results.
NOTE:
The details for display of the period are as follows:

CRNT: Error currently detected with IPDM E/R.

PAST: Error detected in the past and memorized with IPDM E/R.
Contents displayed
NO DTC IS DETECTED.FURTHER TESTING MAY BE REQUIRED.>>INSPECTION END
CAN COMM CIRC>>Print out the self-diagnostic results and refer to LAN-42, "
Precautions When Using
CONSULT-II" .
CONSULT-II displayCONSULT-II
display codeTIME
Details of diagnosis result
CRNT PAST
NO DTC IS DETECTED.
FURTHER TESTING MAY BE REQUIRED.- - - No malfunction
CAN COMM CIRC U1000××Any of or several items below have errors.

TRANSMIT DIAG

ECM

BCM / SEC

PG-28
IPDM E/R (INTELLIGENT POWER DISTRIBUTION MODULE ENGINE ROOM)

Removal and Installation of IPDM E/RBKS0024X
REMOVAL
1. Remove IPDM E/R cover A and IPDM E/R cover.
2. While spreading pawls on both side of IPDM E/R cover B,
remove IPDM E/R from IPDM E/R cover B.
3. Remove harness connector from IPDM E/R.
INSTALLATION
Installation is the revers order of removal.
SKIA4048E

GROUND
PG-29
C
D
E
F
G
H
I
J
L
MA
B
PG

GROUND PFP:00011
Ground Distribution BKS0024Y
MAIN HARNESS
CKIM0661E

PG-30
GROUND

CKIM0662E

GROUND
PG-31
C
D
E
F
G
H
I
J
L
MA
B
PG

CKIM0663E

PG-32
GROUND

CKIM0664E

GROUND
PG-33
C
D
E
F
G
H
I
J
L
MA
B
PG

ENGINE ROOM HARNESS(LH)
CKIM0665E

PG-34
GROUND

CKIM0666E

GROUND
PG-35
C
D
E
F
G
H
I
J
L
MA
B
PG

ENGINE ROOM HARNESS(RH)
CKIM0667E

PG-36
GROUND

ENGINE CONTROL HARNESS/VQ ENGINE MODELS
CKIM0358E