ignition Peugeot 206 Dag 2008 Owner's Manual
Page 2 of 123
5
FAMILIARISATION
-
INSTRUMENTS AND
CONTROLS
1. Steering lock and ignition.
2. S t e e r i n g w h e e l a u d i o e q u i p m e n t
control.
3. W i p e r s / w a s h - w i p e / t r i p
computer stalk.
4. Central adjustable and closing
vents.
5. H a z a r d w a r n i n g l i g h t s s w i t c h .
Central locking button.
6. Multifunction display.
7. Passenger air bag.
8. Glove box.
9. R e a r e l e c t r i c w i n d o w s c o n t r o l .
10. Heated seats control
(according to country).
11. F r o n t e l e c t r i c w i n d o w c o n t r o l s .
12. Exterior mirrors control.
13. Lighter.
14. Front ashtray.
15. Heating / air conditioning
controls.
16. Audio RD3.
Page 12 of 123
15
FAMILIARISATION
-
KEEPING YOUR PASSENGERS SAFE
Front passenger air bag
1. Insertion of the key.
2. Selection of the position:
"ON" ( a c t i v a t i o n ) , w i t h f r o n t
p a s s e n g e r o r " f o r w a r d f a c i n g "
c h i l d s e a t ,
"OFF" ( d i s a r m i n g ) , w i t h
"rear facing" child seat.
3. Removal of the key keeping the
s w i t c h i n t h i s p o s i t i o n .
: 84 Driver's seat belt and
air bags
A.
Driver's seat belt not fastened or
u n f a s t e n e d w a r n i n g l i g h t ,
lit in red.
B. P a s s e n g e r a i r b a g w a r n i n g l i g h t ;
lit if the air bag is disarmed.
C. A i r b a g s w a r n i n g l i g h t ; o f f a f t e r
t h e i g n i t i o n i s s w i t c h e d o n .
: 21
STARTING
Ignition switch
1. Stop position.
2. Accessories position.
3. Running position.
4. Starting position.
Page 17 of 123
INSTRUMENTS and CONTROLS
20 -
B a t t e r y c h a r g e w a r n i n g
light
This indicates one of the fol-
lowing:
- faulty operation of the charging circuit,
- slack battery or starter terminals,
- a cut or slack alternator belt,
- an alternator failure.
Consult a PEUGEOT dealer.
E m i s s i o n c o n t r o l
s y s t e m w a r n i n g l i g h t
( a c c o r d i n g t o m o d e l )
This comes on for a few seconds each
time the ignition is switched on.
If it comes on with the engine running,
this indicates incorrect operation of
the injection, ignition or emission
control system.
I f t h e w a r n i n g l i g h t l a s h e s , t h e r e i s a
risk of damage to the catalytic con-
verter on petrol engines.
Consult a PEUGEOT dealer. D i e s e l e n g i n e p r e - h e a t
warning light
Wait until the warning light
goes out before starting the engine.
If the temperature is high enough,
the warning light comes on for less
than one second. You can start the
engine without waiting.
L o w f u e l l e v e l
warning light
W h e n t h i s l i g h t i r s t
comes on, you have enough fuel to
drive at least 30 miles (50 km). The tank
capacity is approximately 50 litres.
S p e e d l i m i t e r / c r u i s e
c o n t r o l i n d i c a t o r l i g h t
This comes on when the
speed limiter or cruise con-
trol is activated.
D y n a m i c s t a b i l i t y
c o n t r o l s y s t e m ( E S P /
ASR) warning light
This comes on for a few seconds each
time the ignition is switched on.
With the engine running and when
the vehicle is moving, it comes on if
the system is activated.
It lights permanently accompanied by
a message on the multifunction dis-
play when the system is disarmed.
If the warning light remains lit with
the engine running and when the ve-
hicle is moving, consult a PEUGEOT
dealer. A n t i - l o c k b r a k i n g
s y s t e m ( A B S ) w a r n i n g
light
This comes on for a few seconds each
time the ignition is switched on.
If the warning light remains on or
comes on above 8 mph (12 km/h),
this indicates an ABS malfunction.
However, the vehicle retains conven-
tional servo-assisted braking.
Illumination of this warning light,
accompanied by an audible signal
and a message on the multifunction
display, indicates a fault in the ABS
system.
Consult a PEUGEOT dealer.
Page 18 of 123
21
INSTRUMENTS and CONTROLS
-
S e a t b e l t n o t f a s t e n e d
warning light
When the ignition is switched on, this
indicator light comes on if the driver
has not fastened his seat belt.
Above 12 mph (20 km/h), the warning
l i g h t l a s h e s f o r a b o u t t w o m i n u t e s
accompanied by an increasingly au-
dible signal and a message on the
multifunction display. This warning
light remains lit until the driver's seat
belt is fastened. P a s s e n g e r a i r b a g
d i s a r m e d w a r n i n g
light
Illumination of this warning light ac-
companied by a message on the
multifunction display, indicates that
the passenger air bag is disarmed.
The warning light remains lit as long
as the passenger air bag is dis-
armed.
Always consult a PEUGEOT dealer if
t h e w a r n i n g l i g h t l a s h e s .
A i r b a g s w a r n i n g l i g h t
The light will come on for a few seconds
when the ignition is switched on.
With the engine running, illumination
of this warning light, accompanied by
an audible signal and a message on
the multifunction display, indicates a
fault in the air bags.
Consult a PEUGEOT dealer. C o o l a n t t e m p e r a t u r e
i n d i c a t o r
- needle in zone (A), the
temperature is correct,
- needle in zone (B), the
temperature is too high. The
central STOP warning light
l a s h e s .
Y o u m u s t s t o p .
Consult a PEUGEOT dealer. E n g i n e o i l t e m p e r a t u r e
i n d i c a t o r
With the engine running, this indi-
cates the oil temperature:
- needle in zone
(C), the
temperature is correct,
- needle in zone (D), the
temperature is too high. To lower
the oil temperature, reduce your
speed.
Page 19 of 123
21
INSTRUMENTS and CONTROLS
-
S e a t b e l t n o t f a s t e n e d
warning light
When the ignition is switched on, this
indicator light comes on if the driver
has not fastened his seat belt.
Above 12 mph (20 km/h), the warning
l i g h t l a s h e s f o r a b o u t t w o m i n u t e s
accompanied by an increasingly au-
dible signal and a message on the
multifunction display. This warning
light remains lit until the driver's seat
belt is fastened. P a s s e n g e r a i r b a g
d i s a r m e d w a r n i n g
light
Illumination of this warning light ac-
companied by a message on the
multifunction display, indicates that
the passenger air bag is disarmed.
The warning light remains lit as long
as the passenger air bag is dis-
armed.
Always consult a PEUGEOT dealer if
t h e w a r n i n g l i g h t l a s h e s .
A i r b a g s w a r n i n g l i g h t
The light will come on for a few seconds
when the ignition is switched on.
With the engine running, illumination
of this warning light, accompanied by
an audible signal and a message on
the multifunction display, indicates a
fault in the air bags.
Consult a PEUGEOT dealer. C o o l a n t t e m p e r a t u r e
i n d i c a t o r
- needle in zone (A), the
temperature is correct,
- needle in zone (B), the
temperature is too high. The
central STOP warning light
l a s h e s .
Y o u m u s t s t o p .
Consult a PEUGEOT dealer. E n g i n e o i l t e m p e r a t u r e
i n d i c a t o r
With the engine running, this indi-
cates the oil temperature:
- needle in zone
(C), the
temperature is correct,
- needle in zone (D), the
temperature is too high. To lower
the oil temperature, reduce your
speed.
Page 21 of 123
23
INSTRUMENTS and CONTROLS
-
S e r v i c e i n d i c a t o r
This is a visual reminder of when the
next service is due. This service is to
be carried out according to the man-
ufacturer's servicing schedule.5 seconds after the ignition is
switched on, the total distance re-
corder resumes normal operation
and the display shows the total or trip
distances.
T h e d i s t a n c e r e m a i n i n g b e f o r e
t h e n e x t s e r v i c e i s l e s s t h a n
5 0 0 m i l e s ( 1 , 0 0 0 k m ) .
E x a m p l e : 400 miles (900 km) remain
before the next service is due.
When switching on the ignition and
for 5 seconds, the display shows:
5 seconds after the ignition is
switched on, the total distance re-
corder resumes normal operation
and the spanner remains lit.
This indicates that a service should
be carried out shortly. The display
shows the total or trip distances. T h e s e r v i c e i s o v e r d u e .
Each time the ignition is switched on
and for 5 seconds, the spanner and
t h e e x c e s s d i s t a n c e l a s h .
E x a m p l e :
the service is overdue by
300 miles/km. The service should be
carried out very shortly.
When the ignition is switched on and
for 5 seconds, the display shows:
INSTRUMENT PANEL
DISPLAY
After switching on the ignition, three
functions are shown in succession:
- service indicator,
- engine oil level indicator,
- total distance recorder, it remains displayed for 30 seconds after
the ignition is switched off.
It also displays the speed limiter/
cruise control information, when one
of these systems is active (see cor-
responding section).
5 seconds after the ignition is
switched on, the total distance re-
corder resumes normal operation and
the spanner remains lit. The display
shows the total or trip distances.
Operation
As soon as the ignition is switched
on and for 5 seconds, the spanner
symbolising service operations is lit.
The trip recorder display shows the
d i s t a n c e r e m a i n i n g ( i n r o u n d i g u r e s )
before the next service.
E x a m p l e :
4,800 miles/km remain be-
fore the next service is due. When the
ignition comes on and for 5 seconds
the display shows:
Page 22 of 123
INSTRUMENTS and CONTROLS
24 -
R e s e t t i n g t h e s e r v i c e i n d i c a t o r
Your PEUGEOT dealer carries out
this operation after each service.
The reset procedure is as follows:
- Switch off the ignition.
- Press and hold button 1.
- Switch on the ignition.
The display begins a 10 second
countdown.
- Keep button 1 pressed for
10 seconds.
The display shows [=0] and the span-
ner disappears. E n g i n e o i l l e v e l i n d i c a t o r
When the ignition is switched on,
the engine oil level is indicated for
approximately 10 seconds, after the
service information.
O i l l e v e l g a u g e f a u l t
Flashing of the six segments indi-
cates a malfunction of the oil level
gauge.
There is a risk of damage to the en-
gine.
Consult a PEUGEOT dealer.
S u r p l u s o f o i l
Flashing of the six squares and dis-
playing of "max" indicate a surplus of
oil which could damage the engine.
I f t h e s u r p l u s o f o i l i s c o n i r m e d b y
a check using the dipstick, contact a
PEUGEOT dealer without delay.
L a c k o f o i l
Flashing of the six segments and dis-
playing of "min" indicate a lack of oil
which could damage the engine.
I f t h e l a c k o f o i l i s c o n i r m e d b y a
check using the dipstick, it is essen-
tial that the level is topped up. T h e l e v e l r e a d o n t h e g a u g e w i l l
o n l y b e c o r r e c t i f t h e v e h i c l e
i s o n l e v e l g r o u n d a n d t h e e n
-
g i n e h a s b e e n o f f f o r m o r e t h a n
1 5 m i n u t e s .
Page 23 of 123
25
INSTRUMENTS and CONTROLS
-
TOTAL DISTANCE
RECORDER
Pressing button 1 alternates bet-
ween:
- the total distance display,
- the trip distance display,
- the speed limiter or cruise control display when one of
these systems is selected with
the engine running.
To reset the trip recorder to zero,
when it is displayed press button
1 until zeros appear.
LIGHTING RHEOSTAT
With the lights on, press the button
to vary the intensity of the lighting of
the instruments and controls. When
the lighting reaches the minimum (or
maximum) setting, release the but-
ton then press it again to increase (or
reduce) the brightness.
As soon as the lighting is of the re-
quired brightness, release the button.
HAZARD WARNING
LIGHTS
Press the button, the direction indica-
t o r s l a s h .
They can operate with the ignition
off.
A u t o m a t i c l i g h t i n g o f h a z a r d
w a r n i n g l i g h t s
When braking in an emergency,
depending on the deceleration, the
hazard warning lights come on auto-
matically. They switch off automati-
c a l l y t h e i r s t t i m e y o u a c c e l e r a t e .
It is also possible to switch them off
by pressing the button.
Page 28 of 123
AUDIO EQUIPMENT
30 -
GENERAL FUNCTIONS AUDIO SETTINGS
Adjusting the loudness
This function automatically empha-
sises bass and treble tones. Press
button I or J to switch the function on
or off.
On/off
With the ignition key
in the accessories or
ignition position, press
button
A to switch the
set on or off.
The set can ope-
rate for 30 minutes
without the vehicle ignition being
switched on.
Anti-theft system
The audio system is coded in such a
way that it can operate only on your
v e h i c l e . I t w o u l d n o t f u n c t i o n i f i t t e d
to another vehicle.
The anti-theft system is automatic
and requires no action on your part.ADJUSTING THE
VOLUME
Press button C to increase the vol-
ume, or button B to decrease it.
Continuous pressure on buttons C
and B allows a gradual adjustment of
the volume. Adjusting the bass
Adjusting the treble
When
"TREB" is displayed, press
button I or J to vary the setting.
- "TREB -9" for a minimum treble
setting,
- "TREB 0" for a normal setting,
- "TREB +9" for a maximum
treble setting.
Press button
H sev-
eral times in succes-
sion to access the bass
(BASS) , treble (TREB) ,
loudness (LOUD), fader
(FAD) , balance (BAL)
and automatic volume
correction settings.
Exit from audio mode is automatic
after a few seconds without pressing
any button, or by pressing button H
a f t e r c o n i g u r a t i o n o f t h e a u t o m a t i c
volume correction.
Note : bass, treble and loudness set-
t i n g s a r e s p e c i i c t o e a c h s o u r c e . I t
is possible to set them differently for
radio, CD and CD changer. When
"BASS" is dis-
played, press button
I or J to vary the set-
ting.
- "BASS -9" for a
minimum bass
setting,
- "BASS 0" for a normal setting,
- "BASS +9" for a maximum bass
setting.
Page 59 of 123
57
ACCESS
-
KEYS
The keys allow you to switch on the
ignition and independently operate
the passenger air bag disarming
switch and the steering lock. Locating your vehicle
To locate your vehicle, if you have
locked it, in a car park:
F
press button A, the courtesy
lights come on and the direction
i n d i c a t o r s l a s h f o r a f e w
seconds.
Changing the remote control
battery
Battery ref.: CR2016 / 3 volts.
W a r n i n g t h a t t h e b a t t e r y i s l a t i s
given by an audible signal accompa-
nied by the message "Remote con-
trol battery low" on the multifunction
display.
To replace the battery, remove the
screw then unclip the casing using a
coin at the ring.
If the remote control does not work
after the battery has been changed,
reprogramme the remote control.
Key in ignition
A buzzer sounds on opening the dri-
ver's door, if the key has been left in
the ignition. Programming the remote
control
F
Switch off the ignition.
F Switch the ignition on again.
F Press button A immediately for a
few seconds.
F Switch off the ignition and
remove the remote control
key from the ignition lock. The
remote control is now working
again.
Without central
locking / unlocking by
hand
The keys also allow you to unlock/
lock the front doors, the boot and the
f u e l i l l e r c a p .
With central locking /
unlocking
The keys allow you to lock or unlock
all of the doors and the tailgate, from
the front doors.
If one of the doors or the tailgate is
open, the central locking does not
work. With central locking /
unlocking via the remote
control
Press button
A to lock the vehicle.
T h i s i s c o n i r m e d b y i x e d l i g h t i n g o f
t h e d i r e c t i o n i n d i c a t o r s f o r a p p r o x i -
mately two seconds.
Press button B to unlock the vehicle.
T h i s i s c o n i r m e d b y t h e r a p i d l a s h -
ing of the direction indicators.
Avoid pressing the buttons of your
remote control out of range of your
vehicle. You risk causing it not to
work and the remote control would
then have to be reprogrammed (see
corresponding section).