Peugeot 206 P Dag 2010.5 Owner's Guide

33
Demisting - defrosting
To quickly demist or defrost the wind-
screen and side windows:

 place the air intake control 4 in the
"Exterior air intake" position,

 place the air distribution dial 3 in the
"Windscreen" position,

 place the temperature dial 1 and the
air fl ow dial 2 in the maximum posi-
tion,

 close the central vents,

 switch on the air conditioning by
pressing the "A/C" button.
5. Air conditioning On/Off
Switching on

 Press the "A/C" button, the associated
indicator lamp comes on.

The air conditioning does not operate
when the air fl ow adjustment dial 2 is
in position "OFF".
Switching off

 Press the "A/C" button again, the
associated indicator lamp switches
off.
HEATED REAR SCREEN
Switching on
The heated rear screen can only oper-
ate when the engine is running.

 Press this button to demist/defrost the
rear screen. The indicator lamp asso-
ciated with the button comes on.
Switching off
The heated rear screen switches off
automatically to prevent an excessive
consumption of current.

 It is possible to stop the demist-
ing/defrosting operation before it is
switched off automatically by press-
ing the button again. The indicator
lamp associated with the button
switches off.
If the engine is switched off before the
heated rear screen is switched off auto-
matically, demisting/defrosting will resume
next time the engine is switched on.

 Switch off the heated rear screen as
soon as appropriate as lower cur-
rent consumption results in reduced
fuel consumption. The control button is located on
the air conditioning system con-
trol panel.
The air conditioning is designed
to operate effectively in all sea-
sons, with the windows closed.
It enables you to:
- lower the temperature, in summer,
- increase the effectiveness of the demisting, in winter above 0 °C.

34
DIGITAL AIR CONDITIONING
1. Automatic comfort programme
Automatic operation
2. Temperature adjustment
The value indicated on the display cor-
responds to a level of comfort and not
to a temperature in degrees Celsius or
Fahrenheit.
3. Automatic visibility programme
The automatic comfort programme may
not be suffi cient to quickly demist or de-
frost the windscreen and side windows
(humidity, several passengers, ice...).
This system is designed to operate
effectively in all seasons, with the win-
dows closed.
When the engine is cold, to prevent
too great a distribution of cold air, the
air fl ow will only reach its optimum level
gradually.
In cold weather, it favours the distribu-
tion of warm air to the windscreen, the
side windows and the footwells only.
The air conditioning can only operate with the engine ru
nning.

 Press the "AUTO" button.
The "AUTO" symbol is dis-
played.
 Press the arrows 1 (up and
down) to change this value.

 In this case, select the auto-
matic visibility programme.
We recommend that you use this mode:
it provides optimised automatic con-
trol of all of the functions, passenger
compartment temperature, air fl ow,
air distribution and air recirculation, in
accordance with the comfort value that
you have selected. The system automatically controls the
air conditioning, the air fl ow and the air
intake and provides optimum distribu-
tion of the ventilation to the windscreen
and side windows.

 To exit this programme, press the

"AUTO" button again.
A setting around 21 provides an opti-
mum level of comfort. Depending on
your requirements, a setting between
18 and 24 is usual.
On entering the vehicle, if the interior
temperature is much colder or warmer
than the comfort value, there is no need
to alter the value displayed in order to
obtain the required level of comfort. The
system corrects the temperature differ-
ence automatically and as quickly as
possible.

!
!
35
Manual control
Depending on your requirements, you
can make a different selection from that
offered by the system by changing a
setting. The other functions will still be
controlled automatically.

 Press the "AUTO" button to return
to fully automatic operation.
4. Air conditioning On/Off
5. Air distribution adjustment 6. Air fl ow adjustment
7. Air intake/Air recirculation
Deactivation of the system
Avoid prolonged operation in inte-
rior air recirculation mode (risk of
condensation and of deterioration
of the air quality).
Avoid driving for too long with the
air conditioning deactivated.

 Press this button to switch
the air conditioning off. The

"ECO" symbol is displayed.

 Press this button several
times in succession to direct
the air fl ow in turn towards:
 Press the "-" but-
ton to reduce the air
fl ow.

 Press the "+" button
to increase the air
fl ow.

 Press this button to recircu-
late the interior air. The air
recirculation symbol is dis-
played.
 Press the "OFF" button.
This action deactivates all of the func-
tions of the air conditioning system.
The temperature is no longer main-
tained at a comfortable level. However,
a slight fl ow of air, due to the movement
of the vehicle, can still be felt.

 Press the "OFF" , "AUTO" or "visi-
bility" button again to reactivate the
system with the values which were
set before it was deactivated.
Switching the system off may result in some
discomfort (humidity, condensation).

 Press the button again to return
to automatic operation of the air
conditioning. The symbol " A/C " is
displayed.
- the windscreen and side windows (demisting or defrosting),
- the windscreen, the side windows and the footwells,
- the footwells,
- the central vents, the side vents and the footwells,
- the central and side vents. Air recirculation prevents exterior odours
and smoke from entering the passenger
compartment.
Choose this position for rapid cooling of
the passenger compartment.

 As soon as possible, press this button
again to permit the intake of exterior
air and prevent condensation.

36

!i
37
1 - Forwards-backwards adjustment
Lift the control and slide the seat forwards
or backwards.
2 - Height adjustment
Pull the handle upwards.
Remove your weight from the seat to
raise, or press on the seat to lower.
3 - Access to the rear seats
(3-door), A or B according to model

A. Place your fi ngers in one of the two
handles and push forwards to fold
down the seat back and move the
seat forwards.
When put back, the seat returns to its initial position.
No person or object must prevent the seat from returning to its initial
position. Returning to this position is
necessary for the seat to lock. 4 - Seat back angle adjustment
Push the handle towards the rear.
5 - Head restraint height adjustment
To raise the head restraint, pull it up-
wards.

The adjustment is correct when the
upper edge of the head restraint is
level with the top of the head.
The head restraint is fi tted with a frame
with notches, which prevent the head
restraint dropping down (this is a safety
device in case of impact).
FRONT SEATS
Seat consisting of a seat cushion, seat
back and head restraint which can all
be adjusted to your optimum driving
and comfort position.
Never drive with the head re-
straints removed; they should be
in place and correctly adjusted.
It is impossible to access the rear
seats if the front seat is in a reclin-
ing position.
Heated seats
Press the switch, located on the control
panel next to the steering wheel. The
temperature is regulated automatically.
Press again to switch off.
Rear head restraint
These have a position for use (high)
and a position for storage (low).
To lower the head restraints, press the
lug.
They can also be removed.
To remove the head restraints, pull up-
wards as far as the stop then press the
release control.
To lower the head restraint, push simul-
taneously:
- the button on the left-hand guide
at the base of the head restraint
frame,
- the head restraint downwards.
To remove the head restraint, press the
lug.

B. Place your fi ngers in one of the two
handles and push forwards to fold
down the seat back. The seat does
not move forwards.
When put back, the seat back re- turns to its initial angle.

!!
38
REAR SEATS
- position the seat belt under the belt holder 2 ,
- pull control 3 to unlock the seat
back 4 ,
- remove or lower the head restraint,
- tilt the seat back 4 . When repositioning:
- return the seat back to the upright
position,
- fold back the seat cushion,
- reposition the seat belt buckles before locking the front of the seat
cushion,
- check that the seats are locked cor- rectly.
Control 3 must be in the low position.
Rear seat or bench seat which can be
folded to adapt the load space in the
boot.
To fold the rear seats:
- lift the front of the seat cushion
1 ,
- tilt the seat cushion 1 against the
front seats,

Take care not to trap the seat
belts.

Always start with the seat
cush-
ion
, never the seat back (risk of
damage).

!!
39
BENCH SEAT
- position the seat belt under the belt holder 2 ,
- pull the controls 3 to unlock the seat
back 4 ,
- remove or lower the head re- straints,
- tilt the seat back 4 . When repositioning:
- return the seat back to the upright
position,
- fold back the seat cushion,
- reposition the seat belt buckles before locking the front of the seat
cushion,
- check that the bench seat is secured fi rmly.
The controls 3 must be in the low
position.
To fold the bench seat:
- lift the front of the seat cushion
1 ,
- tilt the seat cushion 1 against the
front seats,

Take care not to trap the seat
belts.

Always start with the seat
cush-
ion
, never the seat back (risk of
damage).

40
Removing the rear seat Folding seat back TRANSPORTING LONG OBJECTS
- Tilt the seat cushion against the front seats.
- Squeeze the seat fasteners to re- lease them from their attachments.
- Remove the seat cushion. - Remove the head restraint for com-
plete folding of the seat back.
- Push one of the two handles 5 to-
wards the rear to tilt the seat back.
Front seat:
- Fold the seat back towards the front using the control 5 (see correspond-
ing paragraph).

Rear seat:
- Remove the seat cushion.
- Tilt the seat back.

41
MIRRORS
Door mirrors
Manual model
Adjustment

 Move the lever in all four directions
to direct the mirror correctly.
Folding

 When parked, fold the mirror inwards
manually to protect it.
Unfolding

 Before starting, unfold the mirror.
Electric model
Adjustment

 Turn the control 1 to the right or to
the left to select the corresponding
mirror.

 Move the control 1 in all four direc-
tions to adjust.

 Return the control 1 to the centre
position.
Adjustable mirror permitting the lateral
rearward vision necessary when over-
taking or parking.
Rear view mirror
Adjustment

 Adjust the mirror to direct it correctly
in the "day" position.
Day/night position

 Pull the lever to change to the "night"
anti-dazzle position.

 Push the lever to change to the nor-
mal "day" position.
As a safety precaution, the mirrors must
be adjusted to reduce the "blind spot".
Adjustable mirror permitting central
rearward vision.
The mirror is fi tted with a night anti-dazzle
device.

!
42
STEERING WHEEL ADJUSTMENT
The height of the steering wheel can be
adjusted to adapt the driving position to
the size of the driver.
Adjustment

 When stationary , lower the control
lever to unlock the steering wheel.

 Adjust the height.

 Raise the control lever to lock the
steering wheel.
As a safety precaution, these op-
erations must only be carried out
while the vehicle is stationary.
SUN VISOR
Component which protects against
sunlight from the front or the side, also
equipped with a courtesy mirror.
The sun visors are fi tted with a cour-
tesy mirror, with concealing fl ap for the
driver.
Automatic day/night model
By means of a sensor, which measures
the light from the rear of the vehicle, this
system automatically and progressively
changes between the day and night
uses.
It has an anti-dazzle system which dark-
ens the mirror glass: this reduces any
driver discomfort caused by the light
beams of following vehicles, the sun...
In order to ensure optimum visibility during
your manoeuvres, the mirror lightens auto-
matically when reverse gear is engaged.