Peugeot 208 2019 Service Manual

39
Heated seats
F With the engine running, use the control wheel to switch on and select the level of
heating required:
0: Of f.
1: Low.
2: Medium.
3: High.
Do not use the function when the seat is
not occupied.
Reduce the intensity of the heating as
soon as possible.
When the seat and passenger
compartment have reached an adequate
temperature, you can stop the function;
reducing the consumption of electrical
current reduces fuel consumption. Prolonged use at the highest setting is
not recommended for those with sensitive
skin.
There is a
risk of burns for people whose
perception of heat is impaired (illness,
taking medication, etc.).
There is a risk of overheating the system if
material with insulating properties is used,
such as cushions or seat covers.
Do not use the system:
- i f wearing damp clothing,
-

i
f child seats are fitted.
To avoid breaking the heating element in
the seat:
-

d
o not place heavy objects on the seat,
-

d
o not kneel or stand on the seat,
-

d
o not place sharp objects on the seat,
-

d
o not spill liquids onto the seat.
To avoid the risk of short-circuit:
-

d
o not use liquid products for cleaning
the seat,
-
n

ever use the heating function when
the seat is damp.
Armrest
Cover with opening lever
F

L
ift the lever to raise the cover.
Storage space in the console
F

P
ull the armrest fully up.
3
Ease of use and comfort

40
One-piece bench seat
Bench seat with fixed one-piece cushion and
folding one-piece backrest.
Folding the backrest
F Move the front seats for ward if necessary.
F
P
osition the outer seat belts on the backrest
and buckle them.
F

L
ower the head restraints to the lowest
position. F

R
elease the seat backrest 2 by pressing
controls 1 simultaneously.
F
F
old the seat backrest 2 on to the fixed
cushion.
Raising the seat backrest
F Raise the seat backrest 2 .
F L atch the backrest in place, the red
indicators on each control 1
are no longer
visible.
F

U
nbuckle and return the outer seat belts to
their normal positions ready for use.
2/3-1/3 split rear bench
seat
Bench seat with fixed one-piece cushion and
split backrest (left-hand 2/3, right-hand 1/3)
which can be folded individually to adapt the
load space in the boot.
Folding the backrest
F Move the corresponding front seat for wards
if necessary. F

P
osition the corresponding outer seat belt
against the backrest and buckle it.
F
F
ully lower or remove the head restraint.
F
R
elease the backrest by pressing control
1 of backrest 2
.
F
F
old the backrest 2 on to the fixed cushion.
The rear cushion is not removable.
Ease of use and comfort

41
Returning the backrest to
the normal position
F Raise the seat backrest 2.
F L atch the backrest in place, the red indicator
in the control 1
is no longer visible.
F

U
nbuckle and reposition the seat belts
ready for use.
F

R
efit the head restraint(s).
When folding the seat, the centre seat belt
should not be fastened but laid out flat
along the seat.
When repositioning the seat backrest,
take care not to trap the seat belts.
The rear seat cushion does not fold, only
the seat backrest can be folded in order to
increase the boot loading space.
Head restraints
These have a position for use (up) and
a stowed position (down).
They can be removed and are interchangeable
side to side.
To remove a
head restraint:
F

p
ull the head restraint fully upwards,
F

t
hen, press lug A .
Never drive with the head restraints
removed; they must be fitted and correctly
adjusted.
Advice
Using the ventilation and air
conditioning system
F

T
o ensure that the air is distributed
evenly, keep the external air intake
grilles at the base of the windscreen,
the nozzles, the vents, the air outlets
and the air extractor in the boot free
from obstructions.
F

D
o not cover the sunshine sensor,
located on the dashboard; this is used
for regulation of the automatic air
conditioning system.
F

O
perate the air conditioning system for
at least 5
to 10 minutes, once or twice
a
month to keep it in per fect working
o r d e r.
F

I
f the system does not produce cold air,
switch it off and contact a
PEUGEOT
dealer or a
qualified workshop.
When towing the maximum load on
a
steep gradient in high temperatures,
switching off the air conditioning increases
the available engine power and so
improves the towing ability.
3
Ease of use and comfort

42
If after an extended stop in sunshine, the
interior temperature is very high, first air
the passenger compartment for a few
moments.
Put the air flow control at a
setting high
enough to quickly change the air in the
passenger compartment.
The condensation created by the air
conditioning results in a discharge of water
under the vehicle which is per fectly normal.
Servicing the ventilation and air
conditioning system
F

E
nsure that the cabinfilter is in good
condition and have the filter elements
replaced regularly.
We recommend the use of a
combined
cabin filter. Thanks to its special active
additive, it contributes to the purification of
the air breathed by the occupants and the
cleanliness of the passenger compartment
(reduction of allergic symptoms, bad odours
and greasy deposits).
F

T
o ensure correct operation of the
air conditioning system, you are also
advised to have it checked regularly
as recommended in the Warranty and
Maintenance Record.
Stop & Star t
The heating and air conditioning systems
only work when the engine is running.
Temporarily deactivate the Stop &
Start system to maintain a
comfortable
temperature in the passenger
compartment.
For more information on Stop & Star t ,
refer to the corresponding section.
Heating
1. Temperature adjustment.
2. Air flow adjustment.
3. Air distribution adjustment.
4. Recirculation of interior air.
Temperature
F Turn the knob 1 from blue (cold) to red (hot)
to adjust the temperature.
Air flow
F Turn the knob 2 from position "1" to position
" 6 " to obtain the desired air flow for your
comfort.
If you place the air flow control at position
" 0
"(off), the temperature in the vehicle
will no longer be maintained. A slight flow
of air can still be felt, resulting from the
for ward movement of the vehicle.
Air distribution
You can vary the air distribution in the
passenger compartment using the knob 3 .
Windscreen and side windows.
Windscreen, side windows and
footwells.
Footwells.
Central and side vents.
The air distribution can be
modulated by placing the knob at an
intermediate position.
Ease of use and comfort

43
Manual air conditioning
1.Temperature adjustment.
2. Air flow adjustment.
3. Air distribution adjustment.
4. Recirculation of interior air.
5. Air conditioning on/off.
Dual-zone automatic air
conditioning
Temperature
F Turn the knob 1 from blue (cold) to red (hot)
to adjust the temperature.
Air flow
F Turn the knob 2 from position "1" to position
" 6 " to obtain the desired air flow for your
comfort.
If you place the air flow control at position
" 0
"(off), the temperature in the vehicle
will no longer be maintained. A slight flow
of air can still be felt, resulting from the
for ward movement of the vehicle.
Air distribution
You can vary the air distribution in the
passenger compartment using the knob 3 .
Windscreen and side windows.
Windscreen, side windows and
footwells.
Footwells.
Central and side vents.
The air distribution can be
modulated by placing the knob at an
intermediate position.
Air conditioning
With the engine running, the air conditioning is
designed to operate effectively in all seasons,
with the windows closed.
It allows you:
-

i
n summer, to lower the temperature,
-

t
o increase the effectiveness of the
demisting in winter, above 3°C.
On/Off
F Press button 5 to activate/deactivate the air
conditioning system. To cool the air more quickly, you can use
interior air recirculation for a
few moments by
pressing button 4 . Then return to the intake of
exterior air.
The air conditioning does not operate
when the air flow adjustment control 2 is in
position " 0".
Switching the system off may result in
some discomfort (humidity, misting).
1. Temperature adjustment for left/right side.
2. Air flow adjustment.
3. Air distribution adjustment.
4. Recirculation of interior air.
5. Air conditioning on/off.
6. Automatic comfort programme.
7. Automatic visibility programme.
3
Ease of use and comfort

44
AUTO mode
F Press the "AUTO" button 6 su c c e s s i ve l y.
The active mode appears in the display screen,
as described below: Provides soft and quiet operation by
limiting air flow.
Offers the best compromise between
a
comfortable temperature and quiet
operation.
Provides dynamic and effective air
f low.
When the engine is cold, the air flow will
only reach its optimum level gradually
to prevent too much cold air being
distributed.
In cold weather, it favours the distribution
of warm air to the windscreen, the side
windows and the footwells only.
Manual mode
If you wish, you can make a different choice
f rom that offered by the system by changing
a
setting. The other functions will still be
automatically managed.
When you modify a
setting, the indicator lamp
in the button 6
goes off. F

P
ress the button 6 again to return to the
automatic comfort programme.
Visibility programme
For information on how to use the visibility
programme 7 , refer to the corresponding
section in " Front demisting – defrosting ".
Temperature
The driver and front passenger can each set
the temperature individually.
The value shown on the display is a
level
of comfort, not a
temperature in Celsius or
Fahrenheit.
F

P
ush the button 1 down (blue) to reduce the
value or up (red) to increase it.
A setting of around 21
provides optimum
comfort. Depending on your requirements, a
setting between 18
and 24 is normal.
It is also recommended to avoid a
left /right
setting difference of more than 3.
For maximum cooling or heating of the
passenger compartment, it is possible
to exceed the minimum value 14
or the
maximum value 28.
F

P
ush the button 1 down until "LO" is
displayed or up until " HI" is displayed. On entering the vehicle, if the interior
temperature is much colder or warmer
than the comfort value setting, there is no
need to alter the value displayed in order
to reach the required level of comfort. The
system compensates automatically and
corrects the temperature difference as
quickly as possible.Air conditioning
With the engine running, the air conditioning is
designed to operate effectively in all seasons,
with the windows closed.
It allows you:
-

i
n summer, to lower the temperature,
-

t
o increase the effectiveness of the
demisting in winter, above 3°C.
On/Off
F Press button 5 to activate/deactivate the air
conditioning system.
To cool the air more quickly, you can use
interior air recirculation for a
few moments by
pressing button 4 . Then return to the intake of
exterior air.
The air conditioning does not operate
when the air flow adjustment control 2
is in
position " 0".
Ease of use and comfort

45
Switching the system off may result in
some discomfort (humidity, misting).
Air distribution
F Press button 3 successively to direct the air
flow towards:
-

t
he windscreen, the side windows and the
footwells,
-

t
he windscreen and side windows
(demisting or defrosting),
-

t
he central and side vents,
-

t
he central vents, the side vents and the
footwells,
-

t
he footwells.
Air flow
F Press button 2 "Full fan " to increase the air
f low.
The air flow symbol (a fan) appears in the
screen. It is filled in progressively in relation to
the value required.
F

P
ress button 2 "Empty fan " to reduce the
air f low.
Deactivating the system
F Press button 2 "Empty fan " for the air flow
until the fan symbol disappears and "- - -"
appears. This action deactivates all functions of the air
conditioning system.
Temperature is no longer regulated. A slight air
flow can still be felt however, resulting from the
for ward movement of the vehicle.
Avoid driving for too long with the system
switched off – risk of misting and of
deterioration of the air quality.
Pressing button 2 "
Full fan " reactivates the
system with the values in use at the time it was
switched off.
Recirculation of interior air
The intake of exterior air prevents the formation
of mist on the windscreen and the side
windows.
Recirculation of the interior air isolates the
passenger compartment from exterior odours
and fumes.
This allows hot or cold air to be delivered
quickly when required.
F

P
ress button 4 to recirculate the interior air/
to permit the intake of outside air.
When the interior air recirculation is active, the
symbol appears or the indicator lamp comes on
(depending on version). Avoid prolonged use of the recirculation of
interior air – Risk of formation of mist and
deterioration of the air quality!
Front demisting – defrosting
With heating
F Put the controls for air
flow 2 , temperature 1
and
air distribution 3
in the
appropriately marked position.
With manual air conditioning
F Put the controls for air flow 2 ,
temperature 1 and air distribution
3
in the appropriately marked
position.
F

F

or air conditioning, press button 5 ; its
indicator lamp comes on.
3
Ease of use and comfort

46
Courtesy lamp
Rear screen demisting –
defrosting
On/Off
F Press this button to switch on/switch off
the defrosting of the rear screen and door
mirrors (if fitted to your vehicle).
Switch off the defrosting of the rear
screen and door mirrors as soon
as appropriate, as lower current
consumption results in reduced fuel
consumption.
With automatic dual-zone
air conditioning
Auto – Visibility programme
Switching on
F Press button 7 to demist or defrost the
windscreen and side windows as quickly as
possible.
The system automatically manages the air
conditioning, air flow and air intake, and
provides optimum distribution towards the
windscreen and side windows.
Switching off
F Press button 7 or button 6 again; the
indicator lamp in button 7 goes off, and the
indicator lamp in button 6
comes on.
The system starts again with the values in use
at the time it was switched off.
With Stop & Start, when demisting/
defrosting has been activated, STOP
mode is not available. The rear screen demisting/defrosting
can only operate when the engine is
running.1.
Courtesy lamp
2. Map reading lamps
In this position, the lighting comes
on gradually:
-

w
hen the vehicle is unlocked,
-

w
hen the key is removed from the ignition,
-
w

hen opening a

door,
-
w

hen unlocking remotely.
Ease of use and comfort

47
Map reading lamps
Interior ambient lighting
Switching on
At night, panoramic sunroof light-emitting
diodes (LEDs) come on automatically when the
sidelamps are switched on.
It switches off gradually:
-

w

hen the vehicle is locked,
-

w

hen the ignition is switched on,
-

3

0

seconds after the last door is closed.
Permanently off.
Permanent lighting.
In "permanent lighting" mode, the lighting
time varies according to the circumstances:
-
w
hen the ignition is off, approximately
ten minutes,
-

i
n energy economy mode,
approximately 30


seconds,
-
w

ith the engine running, unlimited.
F With the ignition on, press the corresponding switch.
Take care not to put anything in contact
with the courtesy lamp.
Switching off
The interior ambient lighting switches off
automatically when the sidelamps are switched
of f. The interior ambient lighting can be
configured in the Driving/Vehicle
menu.
Sunroof blind
Opening
F Take the blind by its handle and push it rearward to the desired position.
3
Ease of use and comfort

48
Closing
F Take the blind by its handle and pull it for ward to the desired position.
Interior fittings
Mats
Fitting
When fitting the mat for the first time, on the
driver's side, use only the fixings provided in
the wallet provided.
The other mats are simply placed on the
carpet.
Removing
To remove the mat on the driver's side:
F m ove the seat as far back as possible,
F

un
clip the fixings,
F

r
emove the mat.
Refitting
To refit the mat on the driver's side:
F p osition the mat correctly,
F

r
eattach the fixings by pressing,
F

c
heck that the mat is secured correctly.
To avoid any risk of jamming of the pedals:
-

o
nly use mats which are suited to the
fixings already present in the vehicle;
these fixings must be used,
-

n
ever fit one mat on top of another.
The use of mats not approved by
PEUGEOT may inter fere with access to
the pedals and hinder the operation of the
cruise control/speed limiter.
The mats approved by PEUGEOT have
two fixings located below the seat.
Ease of use and comfort