maintenance schedule Peugeot 407 C 2008 Owner's Manual

9
107
To maintain the reliability of
engines and emission control
systems, the use of additives
in engine oil is prohibited. Cooling system CHECKING THE LEVELS
These are normal maintenance opera-
tions which keep your vehicle in good
working order. Consult the instruc-
tions in the PEUGEOT network, on
the Service Box site or in the servicing
booklet enclosed with this handbook.
Dipstick There are two marks on
the dipstick:

A = maximum
Never fi ll past this mark.

B = minimum
Oil level

 Check the level regularly and top
up between changes.
Check the level with the vehicle level,
the engine having been off for more
than 15 minutes, using the dipstick.
Important: if you have to re-
move/refi t the engine style cov-
er, handle it with care to avoid
damaging the fi xing clips. Oil change
It is imperative that this is carried out
at the intervals specifi ed and the vis-
cosity of the oil chosen must meet the
requirements laid down in the manu-
facturer’s servicing schedule. Consult
the instructions in the PEUGEOT net-
work or on the SERVICE BOX site.

Note: avoid used oil coming into pro-
longed contact with the skin. Empty
the used oil into the containers provid-
ed for this purpose in the PEUGEOT
network.
Oil filter
Replace the cartridge regularly in ac-
cordance with the recommendations
of the servicing schedule.
Brake fluid change
Use the fl uid recommended by the
manufacturer, which fulfi ls DOT4
Standards.
It is imperative that the brake fl uid is
changed at the intervals specifi ed in
accordance with the manufacturer’s
servicing schedule.

Note: avoid all contact with the skin,
the brake fl uid is harmful to health and
very corrosive. Use only the fl uid recommend-
ed by the manufacturer.

Note: the coolant does not need to be
changed.
When the engine is warm, the tem-
perature of the coolant is controlled by
the engine fan. As this fan can oper-
ate with the ignition key removed and
because the cooling system is pressu-
rised, wait for at least one hour after
the engine has stopped before carry-
ing out any work.
Slacken the cap to the fi rst
notch to release the pressure
to prevent any risk of scald-
ing. When the pressure has
dropped, remove the cap and top up
the level with coolant.

The engine fan can oper-
ate after the vehicle has
stopped.

9
108
Used oil
Do not dispose of used oil,
brake fl uid or coolant into
drains or onto the ground.
Windscreen and headlamp wash level
For best quality cleaning and for your
safety, to see and be seen, we would
advise that you use products of the
PEUGEOT Universal range. At the start of winter, have
your battery checked by a
PEUGEOT dealer.
Battery
CHECKS
Have the fi lter elements re-
placed regularly. If you drive
in dusty conditions, change
them twice as often.
Air filter and passenger compartment filter
Brake pad wear depends on
the style of driving, in par-
ticular for vehicles which are
used in town, over short dis-
tances.
Brake pads
It may be necessary to check
the thickness of the pads,
even between services. Where the handbrake travel
is too great or there is a re-
duction in the performance
of the system, the handbrake
should be adjusted.
Have the system checked by a
PEUGEOT dealer.
Handbrake
To ensure the best perform-
ance from components as im-
portant as the power steering
and the braking system, the
manufacturer selects and offers spe-
cifi c products, only use products rec-
ommended by PEUGEOT .
To prevent damage to the electrical
units, high pressure washing of the en-
gine compartment is strictly prohibited .
Use the fl uid recommended by the
manufacturer.

 Open the reservoir, with the engine
at ambient temperature, the level
should always be above the MIN
mark, close to the MAX mark.
Particle emission filter - Additive reservoir (Diesel)
It is imperative that the maintenance of
the particle emission fi lter and the fi ll-
ing of the additive reservoir are carried
out by a PEUGEOT dealer in accord-
ance with the manufacturer’s servicing
schedule.
Disc wear status
For any information relating to check-
ing disc wear, contact a PEUGEOT
dealer.
Power steering fluid level

9
108
Used oil
Do not dispose of used oil,
brake fl uid or coolant into
drains or onto the ground.
Windscreen and headlamp wash level
For best quality cleaning and for your
safety, to see and be seen, we would
advise that you use products of the
PEUGEOT Universal range. At the start of winter, have
your battery checked by a
PEUGEOT dealer.
Battery
CHECKS
Have the fi lter elements re-
placed regularly. If you drive
in dusty conditions, change
them twice as often.
Air filter and passenger compartment filter
Brake pad wear depends on
the style of driving, in par-
ticular for vehicles which are
used in town, over short dis-
tances.
Brake pads
It may be necessary to check
the thickness of the pads,
even between services. Where the handbrake travel
is too great or there is a re-
duction in the performance
of the system, the handbrake
should be adjusted.
Have the system checked by a
PEUGEOT dealer.
Handbrake
To ensure the best perform-
ance from components as im-
portant as the power steering
and the braking system, the
manufacturer selects and offers spe-
cifi c products, only use products rec-
ommended by PEUGEOT .
To prevent damage to the electrical
units, high pressure washing of the en-
gine compartment is strictly prohibited .
Use the fl uid recommended by the
manufacturer.

 Open the reservoir, with the engine
at ambient temperature, the level
should always be above the MIN
mark, close to the MAX mark.
Particle emission filter - Additive reservoir (Diesel)
It is imperative that the maintenance of
the particle emission fi lter and the fi ll-
ing of the additive reservoir are carried
out by a PEUGEOT dealer in accord-
ance with the manufacturer’s servicing
schedule.
Disc wear status
For any information relating to check-
ing disc wear, contact a PEUGEOT
dealer.
Power steering fluid level