Peugeot 407 Dag 2004.5 Owner's Manual

102 -
11-10-2004
103
-
11-10-2004
The contextual menu associated with
the "Navigation - Guidance" application
appears as a superimposed display,
when this is the application currently in
use in the main screen window.
This menu is limited to the following
functions:
- changing of the initial route (entering
of a diversion)*,
- switching to "Selection-Movement on map" mode**,
- storing of the current location (postal address if available or, if it is not, the
GPS co-ordinates),
- changing of the route calculation criteria,- stopping or resuming of guidance (dis- playing of the message which changes
depending on the previous status),
- displaying of the map in full screen mode or reduced mode on the right (displaying
of the message which changes depend-
ing on the previous status)**.
"Navigation - Guidance"
contextual menuRDS TMC (Trafic Message
Channel) Trafic Information
This function enables you to re-
ceive messages relating to trafic
conditions (accidents, trafic jams,
weather, ...).
These messages may appear tem-
porarily as a superimposed display
or be read by the voice synthesiser
if it is active.
You can read the messages transmit-
ted by the TMC station while listening
to another station**.
In map mode**, special TMC sym-
bols are displayed in relation to the
type of information. Select the "TMC Trafic Information"
function from the "Telematics" menu,
you can select:
- "Consult the messages" to display
the list of TMC messages available,
- "Filter the TMC information" to select one or more types of
message,
- "Voice synthesiser" to listen to the TMC messages received,
- "Activate/Deactivate trafic informa- tion" to display the TMC messages
received or not.
* CT monochrome screen only.
** DT colour screen only.
407 saloon and 407 SW comfort

102 -
11-10-2004
103
-
11-10-2004
The contextual menu associated with
the "Navigation - Guidance" application
appears as a superimposed display,
when this is the application currently in
use in the main screen window.
This menu is limited to the following
functions:
- changing of the initial route (entering
of a diversion)*,
- switching to "Selection-Movement on map" mode**,
- storing of the current location (postal address if available or, if it is not, the
GPS co-ordinates),
- changing of the route calculation criteria,- stopping or resuming of guidance (dis- playing of the message which changes
depending on the previous status),
- displaying of the map in full screen mode or reduced mode on the right (displaying
of the message which changes depend-
ing on the previous status)**.
"Navigation - Guidance"
contextual menuRDS TMC (Trafic Message
Channel) Trafic Information
This function enables you to re-
ceive messages relating to trafic
conditions (accidents, trafic jams,
weather, ...).
These messages may appear tem-
porarily as a superimposed display
or be read by the voice synthesiser
if it is active.
You can read the messages transmit-
ted by the TMC station while listening
to another station**.
In map mode**, special TMC sym-
bols are displayed in relation to the
type of information. Select the "TMC Trafic Information"
function from the "Telematics" menu,
you can select:
- "Consult the messages" to display
the list of TMC messages available,
- "Filter the TMC information" to select one or more types of
message,
- "Voice synthesiser" to listen to the TMC messages received,
- "Activate/Deactivate trafic informa- tion" to display the TMC messages
received or not.
* CT monochrome screen only.
** DT colour screen only.
407 saloon and 407 SW comfort

104 -
11-10-2004
105
-
11-10-2004
Filtering the TMC messages
A "Zoom" function enables you to
enlarge the map, in accordance with
the thirteen preset levels relating to
the following scales:
- 50 m/cm, 100 m/cm, 150 m/cm,
200 m/cm, 500 m/cm,
- 1 km/cm, 2 km/cm, 5 km/cm,
- 10 km/cm, 20 km/cm, 50 km/cm,
- 100 km/cm, 200 km/cm.
This is achieved by turning the
navigator.
This mode permits:
- displaying of the vehicle on the map with the route proposed by the
navigation if the guidance is active,
- zooming in on the map in ac- cordance with the thirteen preset
levels,
- displaying of the "Navigation- Guidance" contextual menu.
"Vehicle following on map" mode
** DT colour screen only.General notes on the "Map"
application**
The "Map"
application has two dis-
play modes:
- "Vehicle following on map" mode, representing active guidance on
the map on the right and a large-
scale view of the next intersection
on the left,
- "Selection-Movement on map" mode, representing consultation
of the map in full screen mode or
reduced mode on the right with a
compass on the left.
To switch from one mode to the
other, press the dial briely, then se-
lect the "Move on map" or "Exit map
mode" function.
In "Selection-Movement on map"
mode, you can see symbols, repre-
senting the various types of services
which exist, sorted by category:
- "Administration and safety" symbol on a grey background,
- "Hotels, bars and restaurants" sym- bol on a yellow background,
- "Other businesses" symbol on a purple background,
- "Culture, tourism and entertainment" symbol on a white background,
- "Sports centres and open air centres" symbol on a green back-
ground,
- "Transporation and automobiles" symbol on a blue background.
To ilter these messages, select the
"Filter TMC information" function
from the "TMC Trafic Information"
menu, you then have:
- "Filter by route" to obtain the messages relating to the current
guidance path,
- "Filter by event" to display the mes- sages relating solely to accidents
or trafic jams,
- "Geographical ilter" to take into account the messages within a ra-
dius of action to be deined around
the vehicle and/or a location.
You can ilter these messages
using one or more ilters at the same
time.
407 saloon and 407 SW comfort

104 -
11-10-2004
105
-
11-10-2004
From the general menu, the main
"Map" menu offers various options
for guidance management:
- switching to "Selection-Movement
on map" mode,
- direction of the map towards the North or in the direction of the vehicle,
- recentring of the map around the vehicle,
- opening of the services selection windows visible on the map, such
as hotels, service stations, etc,
- displaying of the window for enter- ing the description for recording the
current position of the vehicle in a
directory ile.
Map
This mode permits:
- selection of any point on the map to obtain guidance towards it or to
obtain information about it (postal
address if available or, if it is not,
GPS co-ordinates),
- movement on the map by means of the four directional arrows, rep-
resenting the four cardinal points
(North, East, South, West),
- zooming in on the map in accord- ance with the thirteen preset levels,
- displaying of the "Map" contextual
menu.
"Selection-Movement on map"
mode
The contextual menu associated with
the "Map" application and with the
"Selection-Movement on map" mode
appears as a superimposed display,
when these are in use in the main
screen window.
This menu is limited to the following
functions:
- displaying of the information on the location selected on the map,
- selection of a location on the map as a destination,
- storing of the location selected (postal address if available or, if it is
not, GPS co-ordinates, so that they
can be recorded in a directory ile),
- switching to "Vehicle following on map" mode.
"Map" contextual menu
407 saloon and 407 SW comfort

108 -
11-10-2004
109
-
11-10-2004
Advice on operation
To obtain even ventilation, avoid
closing the air diffuser grille
10.
In hot weather, to obtain increased
ventilation, you can close the air
diffuser grille 10 and use only the
vents 1 and 6.
For even air distribution, take care
not to obstruct the exterior air intake
grille located at the bottom of the
windscreen, the vents, the air out-
lets under the front seats and the air
extractor located behind the laps in
the boot.
Do not block sensors 2 and 9.
When towing a trailer with a considera-
ble load and when the exterior temper-
ature is very high, the air conditioning
may be cut off temporarily if the engine
cooling makes this necessary.
Pull the blinds on the rear door win-
dows and the rear screen. 1.
Centre panel vents.
2. Temperature and humidity
sensor.
3. Adjustment of the glove box
air low (see section "Interior
layout").
4. Air outlet to passenger
footwells.
5. Two ventilation vents at
the rear at the base of the
centre console between the
passengers.
6. Side vents.
7. Front windows de-icing or
demisting vents.
8. Windscreen de-icing or
demisting vents.
9. Sunshine sensor.
10. Air diffuser grille.
AUTOMATIC REGULATION OF
THE AIR CONDITIONING
The automatic regulation of the air
conditioning in the passenger com-
partment is controlled by various
sensors (exterior temperature, inte-
rior temperature, sunshine), prevent-
ing the need for you to change your
reference settings other than the
temperature displayed. In addition,
a humidity sensor anticipates the for-
mation of condensation in the vehicle
during its use.
Air diffuser
The air diffuser grille, located at
the top of the centre console, sig-
niicantly improves distribution and
lows and prevents air currents, while
maintaining an optimum temperature
inside the passenger compartment.
407 saloon and 407 SW comfort

108 -
11-10-2004
109
-
11-10-2004
407 saloon and 407 SW comfort

110 -
11-10-2004
111
-
11-10-2004
407 saloon and 407 SW comfort
AUTOMATIC AIR
CONDITIONING (MONO
ZONE)
Mono zone: this is the overall regu-
lation of the temperature, distribution
and low in the passenger compart-
ment.
The symbols and messages associat-
ed with the automatic air conditioning
controls appear on the multifunction
display.
General precautions
Do not cover the temperature and
humidity sensor located to the left
of the glove box. It is used to regu-
late the air conditioning.
Operate the air conditioning system
for 5 to 10 minutes once a month to
keep it in perfect working order.
If the system does not produce cold
air, do not use it and contact your
PEUGEOT dealer.
Note: the condensation created by
the air conditioning system results
in a low of water under the vehicle
when stationary which is perfectly
normal. Control by the Auto program
Automatic
program -
comfort (1)
Press the "AUTO" button. The indi-
cator light comes on. The "AUTO"
symbol is displayed on the multifunc-
tion display.
The system adjusts automatically to
the value displayed by the tempera-
ture setting. It controls the distribu-
tion, low, temperature and intake of
air in order to guarantee comfort and
an adequate circulation of air in the
passenger compartment. You do not
have to make any adjustments.

110 -
11-10-2004
111
-
11-10-2004
407 saloon and 407 SW comfort
Adjustment of the
temperature (2)
The value indicated on the display
corresponds to a level of comfort
and not to a temperature in degrees
Celsius or Fahrenheit, depending on
the choice of coniguration validated
on the display.
F Press the right or left arrow to
change it.
A setting around the value 21 makes
it possible to obtain optimum comfort.
However, depending on your require-
ments, a setting between 18 and 24
is usual.
The control of the air conditioning
regulation by the auto-adaptive pro-
gram guarantees good ventilation
inside the passenger compartment.
Control via the manual
controls
It is possible to adjust one or more
functions manually.
The "AUTO" button indicator light is
switched off.
Switching to manual mode may
result in discomfort (temperature,
humidity, odour, condensation) and
is not advantageous (comfort).
To return to automatic mode, press
the "AUTO" button. Blower (3)
Air low
F Turn the dial 3 to
the right to increase
the air low or to the
left to reduce it.
The air low symbol (fan) is dis-
played on the multifunction display
and is illed in in relation to the value
required.
To prevent condensation and dete-
rioration of the quality of the air in
the passenger compartment, ensure
that an adequate low of air is main-
tained.
Deactivation of the air
conditioning
F Turn the dial 3 to
the left until the
low of air stops.
The "OFF" symbol is displayed on
the multifunction display.
This action switches off the display
and the indicator lights.
It deactivates all of the system's
functions, with the exception of the
rear screen demisting.
The temperature-related comfort is
no longer controlled (temperature,
humidity, odour, condensation).
To reactivate the air conditioning:
F Press button 1 or 2. Adjustment of the
air distribution (4)
Successive or continuous pressure
on button 4 enables you to direct the
low of air.
The symbol (arrows) corresponding
to the chosen direction is displayed
on the multifunction display. 5 Windscreen and front side
windows.
3 Front and rear ventilation.
6 Front and rear footwells.
AUTO Automatic distribution.
Front visibility
control (5)
In certain atmospheric conditions,
the comfort program may not be
suficient to demist or de-ice the win-
dows (humidity, several passengers,
ice).
F In this case, select the front vis-
ibility control in order to clear the
windows quickly. The indicator
light comes on.
It controls the air low and intake and
distributes the ventilation to the wind-
screen and front side windows.
The front visibility control symbol is
displayed on the multifunction dis-
play.
Once the inconvenience has been
eliminated, pressing button 1 returns
the system to the comfort setting.

112 -
11-10-2004
113
-
11-10-2004
407 saloon and 407 SW comfort
Intake of exterior
air/Recirculation of
interior air (6)
This function enables you to isolate
the passenger compartment from
exterior fumes and odours.
F Press button 6 several times to
set the air intake mode, the indi-
cator light which corresponds to
the mode set comes on at your
preference:
- intake of exterior air. Forced exte- rior air intake mode.
- recirculation of the air inside the passenger compartment.
Prolonged operation in interior air
recirculation mode may result in
the formation of condensation and
deterioration of the quality of the
interior air.
Do not drive in air recirculation mode
for prolonged periods, except in truly
exceptional atmospheric conditions.
The message associated with the
control is displayed on the multifunc-
tion display.
F Press button 6 to return to auto-
matic control of the air intake.
When the ignition is switched off,
the settings are stored until it is
switched on again. Rear screen
demisting (7)
The heated rear screen operates
independently of the air conditioning
system.
F Press button 7, with the engine
running, to demist the rear screen
and the mirrors. The indicator light
comes on.
Demisting stops automatically in re-
lation to the exterior temperature.
It may be stopped by pressing but-
ton 7 again or when the engine is
switched off but resumes when the
engine is switched on again.

112 -
11-10-2004
113
-
11-10-2004
407 saloon and 407 SW comfort
"AIR CON" menu
Press the "MENU"
button to gain access
to the general menu,
then conirm.
The "General menu" appears on
the multifunction display.
Select the Air Conditioning icon us-
ing the navigator buttons. The
"Air Conditioning" main menu
appears on the multifunction display
as the main display and you have
reached the choice coniguration de-
scribed in the AIR CON paragraph.
You can cancel the deactivation by
pressing the "AUTO" button or the
blower 3 on the air conditioning con-
trol panel.Deactivation of the air
conditioning (AC-OFF)
The symbol "AC OFF" is displayed
on the multifunction display.
There is a risk that the temperature
setting value may not be reached
and you risk having condensation on
the windows.