PEUGEOT 807 2006 Owners Manual

6
7
8
91
2
3
4
92
Press the dial to confirm the selection.
Turn the dial and select the ADJUST
SPEECH SYNTHESIS function.
Turn the dial and select the ACTIVATE
function.
Press the dial to confirm the function.
03 GPS
SPEECH SYNTHESIS
ADJUST SPEECH SYNTHESIS
ACTIVATE Press the MENU button.
Turn the dial and select the MAP
function.
Press the dial to confirm the selection.
Turn the dial and select the MAP
DETAILS function.
Permits selection of the services
which can be seen on the map (hotels,
restaurants...).
ACTIONS ON THE MAP
(Colour display DT only)
MAP DETAILS

1
2
3
4
5
6
7
8
93
ACTIVATING THE ROUTE FILTERPress the MENU button.
Turn the dial and select the
NAVIGATION function.
Press the dial to confirm the selection.
Turn the dial and select the TRAFFIC
INFORMATION function.
TRAFFIC INFORMATION Press the dial to confirm the selection.
Turn the dial and select the FILTER
THE TMC INFORMATION function.
FILTER THE TMC INFORMATION
Press the dial to confirm the selection.
Turn the dial and select the ACTIVATE
ROUTE FILTER function.
ACTIVATE ROUTE FILTER

1
2
3
46
5
7
8
8
94
ADDING A STAGE
Press the MENU button.
Turn the dial and select the
NAVIGATION function.
Press the dial to confirm the
selection.
Turn the dial and select the STAGES
AND ROUTE function.
STAGES AND ROUTE
Turn the dial and select the ADD A
STAGE function. Press the dial to
confirm the selection.
ADD A STAGE
Press the dial to confirm the
selection. Enter an address (see GPS section)
or select SERVICE CHOICE
(restaurants, hotel...).
SERVICE CHOICE
Press the dial to confirm the
selection.
Press the dial to confirm the order of
the stages.
The stage must be completed or deleted before the g uidance
can continue to the next destination.

1
2
34
1
95
04 AUDIO
RADIO
SELECTING A STATION
RADIO
STORING A STATION
Press the SOURCE button several
times in succession and select the
RADIO.
Press the BAND button to select a
waveband: FM1, FM2, FMast, AM.
Briefly press one of the buttons to carry
out an automatic search of the radio
stations.
Press one of the buttons on the
alphanumeric keypad for more than
2 seconds to store the frequency of the
current station.
Press one of the buttons to carry out a
manual search of the radio stations.
Press the LIST button to display the list
of stations received locally.
To update this list, press for more than
two seconds.

1
21
2
3
96
CD
PLAYING A CD OR AN MP3 COMPILATION
CD CHANGER
PLAYING A CD (NOT MP3 COMPATIBLE)
If the GPS is used, the navigation CD ROM must
remain in the RT3 audio/telephone player. In this c
ase,
audio CDs must be inserted in the CD changer.
Otherwise, insert an audio CD or an MP3 compilation
in the player, play begins automatically.
If the player already contains a disc,
press the SOURCE button several
times in succession and select CD.
Press one of the buttons to select a
track on the CD.
Press the LIST button to display the list
of tracks on the CD or of the directories
of the MP3 compilation. Insert one or more CDs in the changer.
Press the SOURCE button several
times in succession and select CD
CHANGER.
Press one of the buttons on the
alphanumeric keypad to select the
corresponding CD.
Press one of the buttons to select a
track on the CD.
The playing and displaying of an MP3 compilation ma y depend on
the recording programme and/or the parameter settin gs used. We
recommend use of the ISO 9660 recording standard.

1
2
31
2
97
05 TELEPHONE
INSTALLING THE SIM CARD
(NOT SUPPLIED) ENTERING THE PIN CODE
Access the slot by pressing the button
using the tip of a pen.
Install the SIM
card in the holder
and then insert it
in the slot.
To remove the SIM card, repeat step 1.
The SIM card must be installed and removed with the RT3 GPS
audio/telephone switched off and the ignition off. Enter the PIN code on the keypad.
Confirm the PIN code by pressing
button # or by selecting the OK tab
on the display.
PIN CODE
When entering the PIN code, tick the STORE PIN tab to gain access
to the telephone without having to enter this code when it is used
subsequently.
OK

98
1
2
3
45
6
1
1
05 TELEPHONE
CALLING A CONTACT
Turn the dial and select the DIAL
function.Press the PICK UP button to display
the superimposed telephone menu.
Press the dial to confirm the selection.
Dial the telephone number of your
contact using the alphanumeric
keypad. Press the PICK UP button to call the
number dialled.
Press the HANG UP button to end the
call.
ACCEPTING OR REFUSING A CALL
Press the PICK UP button.
Press the HANG UP button.
The call will then be transferred to
your voice mailbox.
DIAL

1
2
3
99
Turn the dial and select the MAILBOX
function.Press the PICK UP button.
Press the dial to confirm the selection.
CONSULTING THE MAILBOX
CONSULTING THE SERVICES
Press the LION button to gain access
to the PEUGEOT services.
The services and options are subject to
conditions and availability.
In an emergency, press the SOS button
until you hear an audible signal and
a CONFIRMATION/CANCELLATION
screen is displayed.
The services and options are subject to
conditions and availability.
MAILBOX
OPERATOR SERVICES
PEUGEOT ASSISTANCE
CUSTOMER CONTACT CENTRE
Press the end of the steering wheel stalk for more
than 2 seconds to gain access to the telephone
menu: call log, directory, mailbox.
MESSAGES LIST

3
100
06 TRIP COMPUTER
Each press of the button, located at the end of the
wipers stalk , permits displaying of the different trip
computer data in succession, depending on the displ ay.
- the "Vehicle" tab with:
• the range, the current consumption, the distance remaining
to the destination, Zero reset
When the required route is displayed, press the con
trol for more than
two seconds.

101
A few definitions
Range: Displays the distance which can be travelled with the
remaining fuel detected in the tank, in relation to the average
consumption over the last few miles (kilometres).
This displayed value may vary significantly followi ng a change in
the vehicle speed or the relief of the route.
When the range falls below 20 miles (30 km), dashes are displayed.
After filling with at least 5 litres of fuel, the r ange is recalculated and is
displayed when it exceeds 60 miles (100 km).
If, whilst driving, dashes are displayed continuous ly in place of digits,
contact a PEUGEOT dealer.
Current consumption: only calculated and displayed above 20 mph
(30 km/h).
Average consumption: this is the average quantity of fuel consumed
since the last trip recorder zero reset.
Distance travelled: calculated since the last trip computer zero reset .
Distance remaining to the destination: calculated with reference to
the final destination, entered by the user. If guid ance is activated, the
navigation system calculates it as a current value.
Average speed: this is the average speed calculated since the las t trip
computer zero reset (ignition on).
06 TRIP COMPUTER
Tab "1" (route 1) with:
• the average speed, average consumption and the di stance
travelled calculated over route "1".
Tab "2" (route 2) with the same functions for a second rou te.