wheel alignment RENAULT CLIO 2003 X65 / 2.G Owners Manual

Page 160 of 210

2
1
QXBIUDB*T[G      3DJH 
nu654-6 - CLIO IIC:\Documentum\Checkout
u654-6_eng_T5.WIN 30/10/2002 12:27- page 6
5.06
TYRES
Tyre safety - road wheels
The tyres are the only contact
between the vehicle and the road, so
it is essential to keep them in good
condition.
You must make sure that your tyres
conform to local road regulations.
When they need to be
replaced, only tyres of
the same make,
dimension, type and
profile should be used.
When fitting tyres to the car,
they should either be identical to
those fitted originally or
conform to those recommended
by your Renault Dealer.
Maintaining the tyres
The tyres must be in good condition
and the tread form must have
sufficient depth: tyres approved by
our Technical Department have
wear warning strips1which are
risers moulded into the tread at
several points.When the tread has worn down to
the level of these risers,they
become visible2:the tyres
concerned must be replacednowas
only1.6 mm maximum of tread
remains and this is not sufficient to
maintain good grip on wet roads.
Incidents which occur when
driving such as striking the kerb
may damage the tyres and could
lead to the misalignment of the front
axle geometry.
An overloaded car, long journeys by
motorway, especially in very hot
weather, or continual driving on
poor road surfaces will lead to more
rapid tyre wear and affect safety.