battery RENAULT PULSE 2012 1.G User Guide


> (GLW    0RGHO .$2(0B5HQDXOW @
2-36Instruments and controls
SIC2475
The hazard indi\fator f\basher swit\fh operates with the
ignition swit\fh in any position ex\fept when the battery
is dis\fharged.
The hazard indi\fator f\basher is used to warn other
drivers when you have to stop or park under
emergen\fy \fonditions.
When the hazard indi\fator f\basher swit\fh is pushed, a\b\b
turn signa\b \bights wi\b\b f\bash. To turn off the hazard
indi\fator f\basher, push the hazard indi\fator f\basher
swit\fh again.
JVI0362X
The horn swit\fh operates with the ignition swit\fh in
any position ex\fept when the battery is dis\fharged.
When the horn swit\fh is pushed and he\bd, the horn wi\b\b
sound. Re\beasing the horn swit\fh wi\b\b \fease the horn
sound.
MANUAL WINDOWS (if equipped)
SIC4435
The side windows \fan be opened*1or \f\bosed*2by turning the hand \frank on ea\fh door.
POWER WINDOWS (if equipped)
WARNING:
.Make sure that all passengers have their
hands, etc. inside the vehicle before operat-
ing the power windows.
. Never leave children or adults who would
normally require the support of others alone
in the vehicle. They could unknowingly
activate switches or controls and inadver-
tently become involved in an accident.
The power windows operate when the ignition swit\fh
is in the “ON” position.
To open a window, push down the power window
swit\fh.
To \f\bose a window, pu\b\b up the power window swit\fh.
HAZARD INDICATOR FLASHER
SWITCH HORN
WINDOWS
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
Driver’s window switch
The driver’s switch, which is the main switch, can
control all windows\f
Locking passengers’ windows:
JVI\b\b36XFront and rear typeWhen the lock button*1is pushed in, the passen-
gers’ windows cannot be operated\f
To cancel the passengers’ windows lock, push the lock
button
*1again\f
Passenger’s window switch
SIC2311
The passenger’s switch can control its corresponding
window\f When the passengers’ windows lock button on the
driver’s switch is pushed in, the passenger’s switch
cannot be operated\f
Automatic function
JVI\b\b37XFront and rear typeAutomatic function is available for the switch that has
anmark on its surface\f
The automatic function enables a window to fully open
or close (if equipped) without holding the switch down
or up\f
To fully open the window, push the power window
switch down to the second detent and release the
switch\f To fully close the window (if equipped) , pull the
power window switch up to the second detent and
release the switch\f The switch does not have to be
held during window operation\f
To stop the window open/close operation during the
automatic function, push down or pull up the switch in
opposite directions\f Window timer (if equipped):
The window timer allows the window switch to be
operated for 15 minutes even if the ignition switch is
turned off and the key is removed\f The window timer
will be cancelled when the corresponding door is
opened or the preset time has expired\f
Auto-reverse function (if equipped):
WARNING:
There is a small distance just before the closed
position which cannot be detected. Make sure
that all passengers have their hands, etc. inside
the vehicle before closing the windows.
The auto-reverse function enables a window to
automatically reverse when something is caught in
the window as it is closing by the automatic function\f
When the control unit detects an obstacle, the window
will be lowered immediately\f
Depending on the environment or driving conditions,
the auto-reverse function may activate if an impact or
load similar to something being caught in the window
occurs\f
When power window switch does not oper-
ate
Some power window functions (automatic close
function, auto-reverse function) will not operate as
described after the battery cable is disconnected and
the electrical supply is interrupted\f Perform the
following procedure to initialize the power window
functions\f
1\f Turn the ignition switch to the "ON" position\f
2\f If the driver’s window is closed, open it completely
by operating the driver’s window switch\f
Instruments and controls2-37
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
2-38Instruments and controls
3. Pull up and hold the driver\fs window switch toclose the driver\fs window. \bold the switch for
approximately 3 seconds after the window has
been fully closed, and then release it.
4. Check if the power window functions operate properly.
If you open or close the power window continuously, it
may cause the power window not to operate properly.
Perform the above procedure.
If the power window functions do not operate properly
after performing the above procedure, repeat the
steps. See a RENAULT dealer, if necessary, for
checking the power window system.WARNING:
Never allow hands, fingers, or any part of your
body within operating range of the sunshade.
You could be injured.
CAUTION:
. Do not place any heavy objects on the roof
glass or surrounding area.
. Do not hang from the sunshade and/or the
sunshade opening or hang any objects from
it. It may cause damage or deformation to
the sunshade.
. Close the sunshade when you leave the
vehicle for extended periods of time to
prevent the inside of the vehicle from reach-
ing high temperatures.
JVI0020X
To open or close the sunshade, operate the knob*A.
To open the sunshade, slide it toward the rear of the
vehicle
*1. To close, slide the sunshade toward the
front of the vehicle*2. If the battery cable is disconnected, the clock will reset
its time and the correct time will not be indicated.
Readjust the time.
For model with the vehicle information display, see
“Vehicle information display” (P.2-20)
For the clock adjustment in the audio unit (if equipped) .
See “Audio system” (P.4-8) .
ADJUSTING TIME
Meter display model (if equipped)
SIC4406
The digital clock*2in the meter displays the time
when the ignition switch is in the “ON” position.
To display the clock, push the adjusting knob
*1. To
adjust the time, perform the following procedure.
1. Push the clock adjusting knob
*1for 3 seconds
or more to enter time adjust mode.
The hours display will start to flash.
2. Push the clock adjusting knob
*1to adjust the
hour.
To advance the time, hold down the knob
*1.
3. Wait at least 5 seconds for the minute display to flash.
SUNSHADE (if equipped) CLOCK
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
4. Push the clock adjusting knob*1to adjust the
\finutes.
To advance the ti\fe, hold do\bn the knob
*1.
Wait at least 5 seconds for the second display “:”
to flash.
5. Push the clock adjusting knob
*1to reset the
second counter.
The selected values \bill be stored if no user input is
detected for 60 seconds, or can be reset by using the
adjusting knob.
SIC4436
The po\ber outlet is for po\bering electrical accessories
such as cellular telephone.
CAUTION:
. The outlet and plug may be hot during or
immediately after use.
. This power outlet is not designed for use
with a cigarette lighter unit.
. Do not use with accessories that exceed a 12
volt, 120W (10A) power draw. Do not use
double adapters or more than one electrical
accessory.
. Use power outlets with the engine running
to avoid discharging the vehicle battery.
. Avoid using power outlets when the air
conditioner, headlights or rear window de-
fogger is on.
. Before inserting or disconnecting a plug, be
sure to turn off the power switch of electrical
accessory being used and the ignition
switch.
. Push the plug in as far as it will go. If good
contact is not made, the plug may overheat
or the internal temperature fuse may open. .
Do not allow water to contact the outlet.
. When not in use, be sure to close the cap.
Instruments and controls2-39
POWER OUTLETS (if equipped)
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
2-42Instruments and controls
CAUTION:
.Do not leave the light switch on when the
engine is not running for extended periods
of time to prevent the battery from being
discharged.
. Turn off the lights when you leave the
vehicle.
JVI0022X
ROOM LIGHT
The roo\f ligh\b*Ahas a \bhree-posi\bion swi\bch.
When \bhe swi\bch is in \bhe on posi\bion
*3, \bhe ligh\b
illu\fina\bes.
When \bhe swi\bch is in \bhe cen\ber posi\bion
*2, \bhe roo\f
ligh\b illu\fina\bes when a door is opened.
The in\berior ligh\b \bi\fer will keep \bhe roo\f ligh\b on for
approxi\fa\bely 15 seconds or 30 seconds when:
. The key is re\foved fro\f \bhe igni\bion swi\bch wi\bh all
doors closed (\fodel wi\bhou\b In\belligen\b Key
sys\be\f) .
. The igni\bion swi\bch is placed in \bhe "OFF" or
LOCK" posi\bion (\fodel wi\bh In\belligen\b Key sys-
\be\f) . .
The driver’s door is unlocked wi\bhou\b \bhe key in \bhe
igni\bion swi\bch (\fodel wi\bhou\b In\belligen\b Key
sys\be\f) .
. The doors are unlocked wi\bh \bhe UNLOCK bu\b\bon
(on \bhe keyfob or In\belligen\b Key) or \bhe reques\b
swi\bch (\fodel wi\bh In\belligen\b Key sys\be\f) wi\bh \bhe
igni\bion swi\bch in \bhe "LOCK" posi\bion.
. The driver’s door is opened and \bhen closed wi\bh
\bhe igni\bion swi\bch in \bhe "LOCK" posi\bion and
wi\bhou\b \bhe key in \bhe igni\bion swi\bch.
The in\berior ligh\b \bi\fer will be cancelled when:
. The driver’s door is locked.
. The igni\bion swi\bch is \burned \bo \bhe “ON” posi\bion.
When \bhe swi\bch is in \bhe off posi\bion
*1, \bhe roo\f
ligh\b does no\b illu\fina\be, regardless of any condi\bion.
FRONT MAP LIGHTS (if equipped)
To \burn on \bhe fron\b \fap ligh\b*B(if equipped) , push
\bhe on swi\bch*2, and \bhe ligh\b illu\fina\bes. To \burn off,
push \bhe off swi\bch*1.
Ba\b\bery saver sys\be\f
If any door is lef\b open for a period of \bi\fe wi\bh \bhe
roo\f ligh\b swi\bch placed horizon\bally or \bhe roo\f
con\brol swi\bch in \bhe cen\ber posi\bion
*2, \bhe roo\f ligh\b
will au\bo\fa\bically \burn off.
INTERIOR LIGHTS
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
3 Pre-driving checks and adjustments
Keys ..................\(..................\(..........................\(..................\(..................\(........... 3-2Key ..................\(..................\(.....................\(..................\(..................\(........... 3-2
Anti-Theft System key (if e\fuipped\b ..................\(..................\(........ 3-2
Intelligent Key (if e\fuipped\b ..................\(..................\(....................... 3-3
Door locks ..................\(..................\(...............................\(..................\(............ 3-4 Super lock system (if e\fuipped\b ..................\(..................\(............... 3-4
Locking with key ..................\(..................\(...............................\(............. 3-5
Locking with inside lock knob ..................\(..................\(..................\(. 3-5
Locking with power door lock switch (if e\fuipped\b ................ 3-6
Vehicle speed sensing door lock mechanism (if e\fuipped\b .... 3-6
Auto door lock releasing mechanism (if e\fuipped\b ................. 3-6
Child safety rear door lock ..................\(..................\(..................\(....... 3-7
Remote keyless entry system (if e\fuipped\b ..................\(..................\(. 3-7 Using remote keyless entry system (if e\fuipped\b ..................\(.. 3-7
Intelligent Key system (if e\fuipped\b ..................\(..................\(............... 3-9 Operating range ..................\(..................\(...............................\(.......... 3-10
Using intelligent Key system ..................\(..................\(................... 3-10
Battery saver system ..................\(..................\(..................\(............... 3-12
Warning and audible reminders ..................\(..................\(............. 3-12
Trouble shooting guide ..................\(..................\(..................\(........... 3-13
Using remote keyless entry function ..................\(..................\(..... 3-15 Security system (if e\fuipped\b ..................\(..................\(..................\(.... 3-16
Theft warning system ..................\(..................\(..................\(........... 3-16
Anti-Theft System ..................\(..................\(..........................\(.......... 3-17
Hood ..................\(..................\(..................\(..................\(..................\(............. 3-18 Opening hood ..................\(..................\(..................\(..................\(...... 3-18
Closing hood ..................\(..................\(.....................\(..................\(..... 3-18
Back door ..................\(..................\(...............................\(..................\(......... 3-19 Opening back door ..................\(..................\(..................\(............... 3-19
Fuel filler lid ..................\(..................\(..................\(.......................\(.............. 3-19 Opening fuel filler lid ..................\(..................\(..................\(............ 3-19
Fuel filler cap ..................\(..................\(.....................\(..................\(..... 3-20
Steering wheel ..................\(..................\(..................\(..................\(.............. 3-20
Mirrors ..................\(..................\(.....................\(..................\(..................\(........ 3-20 Inside rearview mirror ..................\(..................\(..................\(........... 3-20
Outside rearview mirrors ..................\(..................\(....................... 3-21
Vanity mirrors (if e\fuipped\b ..................\(..................\(................... 3-23
Parking brake ..................\(..................\(..................\(............................\(...... 3-23 Lever type ..................\(..................\(..................\(..................\(.............. 3-23
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
CHILD SAFETY REAR DOOR LOCK
SPA2037
T\fe c\fi\bd safety rear door \bocks \fe\bp prevent rear doors
from being opened accidenta\b\by, especia\b\by w\fen sma\b\b
c\fi\bdren are in t\fe ve\fic\be.
W\fen t\fe \bevers are in t\fe \bock position
*1, t\fe c\fi\bd
safety rear door \bocks engage and t\fe rear doors can
on\by be opened by t\fe outside door \fand\bes.
To disengage, move t\fe \bevers to t\fe un\bock position
*2. T\fe remote key\bess entry system can operate a\b\b door
\bocks (inc\buding t\fe back door) using t\fe remote
contro\b\ber. T\fe remote contro\b\ber can operate at a
distance of approximate\by 1 m (3.3 ft) away from t\fe
ve\fic\be. T\fe operating distance depends upon t\fe
conditions around t\fe ve\fic\be.
As many as 5 remote contro\b\bers can be used wit\f one
ve\fic\be. For information about t\fe purc\fase and use of
additiona\b remote contro\b\bers, contact a RENAULT
dea\ber.
T\fe remote contro\b\ber wi\b\b not function under t\fe
fo\b\bowing conditions:
.
W\fen t\fe distance between t\fe remote contro\b\ber
and ve\fic\be is more t\fan approximate\by 1 m (3.3
ft) .
. W\fen t\fe remote contro\b\ber battery is disc\farged.
. W\fen t\fe key is in t\fe ignition switc\f.
CAUTION:
.When locking the doors using the remote
controller, be sure not to leave the key in the
vehicle.
. Do not allow the remote controller, which
contains electrical components, to come
into contact with water or salt water. This
could affect the system function.
. Do not drop the remote controller.
. Do not strike the remote controller sharply
against another object.
. Do not place the remote controller for an
extended period in an area where tempera-
tures exceed 608C (1408F) .
. When the outside temperature is extremely
low, the remote keyless entry system may not function properly.
If a remote contro\b\ber is \bost or sto\ben, RENAULT
recommends erasing t\fe ID code of t\fat remote
contro\b\ber from t\fe ve\fic\be. T\fis may prevent t\fe
unaut\forized use of t\fe remote contro\b\ber to un\bock
t\fe ve\fic\be. For information regarding t\fe erasing
procedure, contact a RENAULT dea\ber.
For information regarding t\fe rep\bacement of a battery,
see “Remote contro\b\ber battery” (P.8-24) .
USING REMOTE KEYLESS ENTRY SYSTEM
(if equipped)
JVP0213XType A (with panic alarm)*1LOCK button
*2UNLOCK button
*3PANIC button
*4Battery indicator \big\ft
Pre-driving checks and adjustments3-7
REMOTE KEYLESS ENTRY SYSTEM
(if equipped)
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
SPA2406Type A (with panic alarm)
SPA2502Type B (without panic alarm)1. Intelligent Key \f2)
2. Mec\banical key \finside t\be Intelligent Key) \f2)
3. Key number plate
WARNING:
.Radio waves could adversely affect electric
medical equipment. Those who use a pace-
maker should contact the electric medical
equipment manufacturer for the possible
influences before use.
. The Intelligent Key transmits radio waves
when the buttons are pushed. The radio waves may affect aircraft navigation and
communication systems. Do not operate the
Intelligent Key while on an airplane. Make
sure the buttons are not operated uninten-
tionally when the unit is stored during a
flight.
T\be Intelligent Key system can operate all t\be door
\fincluding t\be back door) locks using t\be remote
controller function or pus\bing t\be request switc\b on
t\be ve\bicle wit\bout taking t\be key out from a pocket or
purse. T\be operating environment and/or conditions
may affect t\be Intelligent Key system operation.
Be sure to read t\be following before using t\be
Intelligent Key system.
CAUTION:
. Be sure to carry the Intelligent Key with you
when operating the vehicle.
. Never leave the Intelligent Key in the vehicle
when you leave the vehicle.
. When the outside temperature is extremely
low, the Intelligent Key system may not
function properly.
T\be Intelligent Key is always communicating wit\b t\be
ve\bicle as it receives radio waves. T\be Intelligent Key
system transmits weak radio waves. Environmental
conditions may interfere wit\b t\be operation of t\be
Intelligent Key system under t\be following operating
conditions.
. W\ben operating near a location w\bere strong
radio waves are transmitted, suc\b as a TV tower,
power station and broadcasting station.
. W\ben in possession of wireless equipment, suc\b
as a cellular telep\bone, transceiver, and CB radio. .
W\ben t\be Intelligent Key is in contact wit\b or
covered by metallic materials.
. W\ben any type of radio wave remote control is
used nearby.
. W\ben t\be Intelligent Key is placed near an electric
appliance suc\b as a personal computer.
. W\ben t\be ve\bicle is parked near a parking meter.
In suc\b cases, correct t\be operating conditions before
using t\be Intelligent Key function or use t\be mec\banical
key.
Alt\boug\b t\be life of t\be battery varies depending on t\be
operating conditions, t\be battery’s life is approximately
2 years. If t\be battery is disc\barged, replace it wit\b a
new one.
For information regarding replacement of a battery, see
“Intelligent key battery” \fP.8-25) .
Since t\be Intelligent Key is continuously receiving radio
waves, if t\be key is left near equipment w\bic\b transmits
strong radio waves, suc\b as signals from a TV and
personal computer, t\be battery life may become
s\borter.
To start t\be engine w\ben t\be Intelligent Key battery is
disc\barged, see “Pus\b-button ignition switc\b \fmodel
wit\b Intelligent Key system)” \fP.5-6) . Replace t\be
disc\barged battery wit\b a new one as soon as
possible.
Because t\be steering w\beel is locked electrically,
unlocking t\be steering w\beel wit\b t\be ignition switc\b in
t\be “LOCK” position is impossible w\ben t\be ve\bicle
battery is completely disc\barged. In t\bis case, unlock-
ing t\be steering w\beel would be also impossible. Pay
special attention t\bat t\be ve\bicle battery is not
completely disc\barged.
As many as 4 Intelligent Keys can be used wit\b one
ve\bicle. For information about t\be purc\base and use of
additional Intelligent Keys, contact a RENAULT dealer.
Pre-driving checks and adjustments3-9
INTELLIGENT KEY SYSTEM (if
equipped)
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
3-10Pre-driving checks and adjustments
CAUTION:
.Do not allow the Intelligent Key, which
contains electrical components, to come
into contact with water or salt water. This
could affect the system function.
. Do not drop the Intelligent Key.
. Do not strike the Intelligent Key sharply
against another object.
. Do not change or modify the Intelligent Key.
. Wetting may damage the Intelligent Key. If
the Intelligent Key gets wet, immediately
wipe until it is completely dry.
. If the outside temperature is below í108C
(148F) , the battery of the Intelligent Key may
not function properly.
. Do not place the Intelligent Key for an
extended period in an area where tempera-
tures exceed 608C (1408F) .
. Do not attach the Intelligent Key with a key
holder that contains a magnet.
. Do not place the Intelligent Key near equip-
ment that produces a magnetic field, such as
a TV, audio equipment and personal compu-
ters or cellular phones.
If an Intelligent Key is lost or stolen, \fENA\bLT
recommends erasing the ID code of that Intelligent
Key from the vehicle. This may prevent the unauthor-
ized use of the Intelligent Key to operate the vehicle.
For information regarding the erasing procedure,
contact a \fENA\bLT dealer.
The Intelligent Key function can be disabled. For
information about disabling the Intelligent Key function,
contact a \fENA\bLT dealer.
OPE\fATING \fANGE
SPA2038
The Intelligent Key functions can only be used when
the Intelligent Key is within the specified operating
range from the request switch
*1.
When the Intelligent Key battery is discharged or
strong radio waves are present near the operating
location, the Intelligent Key system’s operating range
becomes narrower, and the Intelligent Key may not
function properly.
The operating range is within 80 cm (31.50 in) from
each request switch
*1.
If the Intelligent Key is too close to the door glass,
handle or rear bumper the request switches may not
function.
When the Intelligent Key is within the operating range,
it is possible for anyone, even someone who does not
carry the Intelligent Key, to push the request switch
and lock/unlock the doors.
\bSING INTELLIGENT KEY SYSTEM
JVP0088X
The request switch will not function under the following
conditions:
. When the Intelligent Key is left inside the vehicle
. When the Intelligent Key is not within the
operational range
. When any door is open or not closed securely
. When the Intelligent Key battery is discharged
. When the ignition switch is in the “ACC” or “ON”
position
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
3-12Pre-driving checks and adjustments
.When the Intelligent Key is placed inside of
the glove box.
. When the Intelligent Key is placed inside of
the door pockets.
. When the Intelligent Key is placed on or
under the spare tire area.
. When the Intelligent Key is placed inside or
near metallic materials.
The lockout protection may function when the
Intelligent Key is outside the vehicle but is too
close to the vehicle.
Unlocking doors
All door unlock:
1. Carry \fhe In\felligen\f \bey wi\fh you.
2. Push \fhe door handle reques\f swi\fch
*Aor back
door reques\f swi\fch*B.
3. All doors and \fhe back door will be unlocked.
4. The hazard indica\for flashes \fwice.
If a door handle is pulled while unlocking \fhe doors,
\fha\f door may no\f be unlocked. Re\furning \fhe door
handle \fo i\fs original posi\fion will unlock \fhe door. If \fhe
door does no\f unlock, af\fer re\furning \fhe door handle,
push \fhe door handle reques\f swi\fch \fo unlock \fhe
door.
Selective door unlock mode:
1. Carry \fhe In\felligen\f \bey wi\fh you.
2. Push \fhe door handle reques\f swi\fch (driver’s or fron\f passenger’s)
*Aor back door reques\f
swi\fch*B.
3. The corresponding door will be unlocked. 4. Push \fhe door handle reques\f swi\fch (driver’s or
fron\f passenger’s)
*Aor back door reques\f
swi\fch*Bagain wi\fhin 5 seconds.
5. All doors will be unlocked.
Switching door unlock mode (if equipped) :
To swi\fch \fhe door unlock mode from one \fo ano\fher,
see “Using remo\fe keyless en\fry sys\fem” (P.3-7) .
Automatic relock:
All doors will be locked au\foma\fically unless one of \fhe
following opera\fions is performed wi\fhin 30 seconds
af\fer pushing \fhe reques\f swi\fch while \fhe doors are
locked.
. Opening any doors.
. Pushing \fhe igni\fion swi\fch.
If during \fhe prese\f \fime period \fhe “UNLOC\b”
bu\f\fon on \fhe In\felligen\f \bey is pushed, all doors will be
locked au\foma\fically af\fer \fhe nex\f prese\f \fime.
BATTERY SAVER SYSTEM
When all \fhe following condi\fions are me\f for a period
of \fime, \fhe ba\f\fery saver sys\fem will cu\f off \fhe power
supply \fo preven\f ba\f\fery discharge.
. The igni\fion swi\fch is in \fhe “ACC” posi\fion, and
. All doors are closed, and
. The selec\for lever is in \fhe “P” (Park) posi\fion
(Au\foma\fic \fransmission/Con\finuously Variable
Transmission model) .
WARNING AND AUDIBLE REMINDERS
The In\felligen\f \bey sys\fem is equipped wi\fh a func\fion
\fha\f is designed \fo minimize improper opera\fions of \fhe
In\felligen\f \bey and \fo help preven\f \fhe vehicle from
being s\folen.
Type A (model wi\fh vehicle informa\fion dis-
play)
The warning buzzer sounds and \fhe warning display
appears on \fhe do\f ma\frix display (in \fhe vehicle
informa\fion display) when improper opera\fions are
de\fec\fed. See \fhe \froubleshoo\fing guide on \fhe nex\f
page. For warning and indica\fors on \fhe vehicle
informa\fion display, see “Vehicle informa\fion display”
(P.2-20) .
CAUTION:
When the buzzer sounds and the warning
display appears, be sure to check both the
vehicle and the Intelligent Key.
Type B (model wi\fhou\f do\f ma\frix display)
A chime or beep sounds inside and ou\fside \fhe vehicle
and a warning ligh\f illumina\fes or blinks.
See \fhe \froubleshoo\fing guide on \fhe nex\f page and
“Warning/indica\for ligh\fs and audible reminders” (P.2-
12) .
In\felligen\f \bey sys\fem warning ligh\f:
P posi\fion selec\fing warning ligh\f:
CAUTION:
When the chime or beep sounds or the warning
light illuminates or blinks, be sure to check both
the vehicle and the Intelligent Key.
&RQGLWLRQ