battery RENAULT PULSE 2012 1.G Owner's Manual


> (GLW    0RGHO .$2(0B5HQDXOW @
3-14Pre-driving checks and adjustments
SymptomPossible cause\fction to take
W\ben pus\bing t\be request switc\b or t\be
“LOCK”
button on t\be Intelligent
Key to lock t\be door T\be outside c\bime sounds for a few
seconds and all t\be doors unlock.T\be Intelligent Key is inside t\be ve\bicle. Carry t\be Intelligent Key wit\b you.
T\be ignition switc\b is in t\be “\fCC” or
“ON” position.
Pus\b t\be ignition switc\b to t\be “OFF”
position.
\f door is not closed securely. Close t\be door securely.
W\ben pus\bing t\be door \bandle request
switc\b to lock t\be door T\be outside c\bime sounds for a few
seconds.T\be Intelligent Key is inside t\be ve\bicle. Carry t\be Intelligent Key wit\b you.
\f door is not closed securely.
Close t\be door securely.
W\ben pus\bing t\be ignition switc\b to start
t\be engine Type \f: T\be Intelligent Key battery
indicator appears on t\be display.
Type B: T\be Intelligent Key system
warning lig\bt in t\be meter blinks in green.
T\be battery c\barge is low.
Replace t\be battery wit\b a new one. (See
“Battery” (P.8-23) .)
Type \f: T\be NO KEY warning appears on
t\be display and t\be inside warning c\bime
sounds for a few seconds.
Type B: T\be Intelligent Key system
warning lig\bt in t\be meter blinks in yellow
and t\be inside warning c\bime sounds for
a few seconds. T\be Intelligent Key is not in t\be ve\bicle.
Carry t\be Intelligent Key wit\b you.
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
4-10Heater and air conditioner, and audio system
.The in-vehicle antenna for BluetoothŠco\f\fu-
nication is built in the syste\f\b Do not place the
Bluetooth
Šaudio device in an area surrounded by
\fetal, far away fro\f the syste\f or in a narrow
space where the device closely contacts the body
or the seat\b Otherwise, sound degradation or
connection interference \fay occur\b
. While a Bluetooth
Šaudio device is connected
through the BluetoothŠwireless connection, the
battery power of the device \fay discharge quicker
than usual\b
. This syste\f is co\fpatible with the Bluetooth
ŠAV
profile (A2DP and AVRCP) \b
BluetoothŠis a trade\fark owned
by Bluetooth SIG, Inc\b, and li-
censed to Daewoo IS Corp\b
Co\fpact Disc with MP3 or WMA (if
equipped)
Explanation of terms:
. MP3 — MP3 is short for Moving Pictures Experts
Group Audio Layer 3\b MP3 is the \fost well known
co\fpressed digital audio file for\fat\b This for\fat
allows for near “CD quality” sound, but at a
fraction of the size of nor\fal audio files\b MP3
conversion of an audio track fro\f CD can reduce
the file size by approxi\fately 10:1 ratio (Sa\fpling:
44\b1 kHz, Bit rate: 128 kbps) with virtually no
perceptible loss in quality\b MP3 co\fpression
re\foves the redundant and irrelevant parts of a
sound signal that the hu\fan ear doesn’t hear\b
. WMA — Windows Media Audio (WMA) is a
co\fpressed audio for\fat created by Microsoft as
an alternative to MP3\b The WMA codec offers
greater file co\fpression than the MP3 codec,
enabling storage of \fore digital audio tracks in the
sa\fe a\fount of space when co\fpared to MP3s at the sa\fe level of quality\b
. Bit rate — Bit rate denotes the nu\fber of bits per
second used by a digital \fusic files\b The size and
quality of a co\fpressed digital audio file is
deter\fined by the bit rate used when encoding
the file\b
. Sa\fpling frequency — The rate at which the
sa\fples of a signal are converted fro\f analog to
digital (A/D conversion) per second\b
. Multisession — Multisession is one of the \fethods
for writing data to \fedia\b Writing data once to the
\fedia is called a single session, and writing \fore
than once is called a \fultisession\b
. ID3/WMA Tag — The ID3/WMA tag is the part of
the encoded MP3 or WMA file that contains
infor\fation about the digital \fusic file such as
song title, artist, albu\f title, encoding bit rate,
track ti\fe duration, etc\b ID3 tag infor\fation is
displayed on the Albu\f/Artist/Song title line on
the display\b
* WindowsŠand Windows MediaŠare registered
trade\farks and trade\farks in the United States of
A\ferica and other countries of Microsoft Corporation
of the USA\b Playback order:
SAA1025Playback order chartThe \fusic playback order of the CD with MP3 or
WMA is as illustrated\b
.
The na\fes of folders not containing MP3 or WMA
files are not shown in the display\b
. If there is a file in the top level of the disc, “Root
Folder” is displayed\b
. The playback order is the order in which the files
were written by the writing software\b Therefore,
the files \fight not play in the desired order\b
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
not taken out from the loading slot, the CD \fill
automatically be reloaded to the slot to \brotect the CD
(12 cm discs only) .
AUX button:
The AUX IN jack is located on the audio unit. The AUX
IN audio in\but jack acce\bts any standard analog audio
in\but such as from a \bortable cassette ta\be, CD \blayer,
MP3 \blayer or la\bto\b com\buters.
Push the AUX button to \blay a com\batible device \fhen
it is \blugged into the AUX IN jack.
CAUTION:
. Do not allow the cable or an external device
connected to the AUX terminal to affect your
driving.
. Connect a stereo mini-plug (3.5 mm in
diameter) cable to the AUX IN jack. If a
monaural mini-plug cable is used, the audio
will not output correctly.
WARNING:
.Depending on the external device, please
note that the volume may be louder or
quieter than that of the external device.
. When the AUX contacts with the plug of the
connector cable, noise may be heard.
. The connected exterior device cannot be
operated with the main audio system. The
volume and sound quality can be adjusted.
. The song title in the external device cannot
be displayed on the audio display. .
For the power source of the external device,
use the special battery. The external device
cannot be charged with the AUX terminal.
Noise may be heard if the CD, radio etc. is
operated while charging the battery with the
power socket of the vehicle.
FM-AM radio o\beration
SAA3123
The audio system o\berates \fhen the ignition s\fitch is
in the “ACC” or “ON” \bosition.
/button:
When the
/button is \bushed \fhile the audio
system is off, the audio system \fill turn on and the
radio \fill turn on.
When the
/button is \bushed \fhile another
audio source is \blaying, the another audio source \fill
turn off and the radio \fill turn on.
To change the radio bands, \bush the
/button
until the desired band (FM1, FM2, AM) is dis\blayed.
The FM stereo indicator, “ST” \fill dis\blay during FM
stereo rece\btion. When the stereo broadcast signal is
\feak, the radio \fill automatically change from stereo
to monaural rece\btion.
TUNE/FF·REW/FOLDER button:
When adjusting the broadcasting station frequency
manually, \bush the
orbutton until the desired
frequency is achieved.
When adjusting the broadcasting station frequency
automatically, \bush the
orbutton. When the
system detects a broadcasting station, it \fill sto\b at
the station.
SEEK UP/DOWN button:
When adjusting the broadcasting station frequency
automatically, \bush the
button. When the
system detects a broadcasting station, it \fill sto\b at
the station.
button:
When the
button is \bushed, the system \fill seek
and sto\b at the detected broadcasting station for 5
seconds, and then it \fill start to seek for the next
broadcasting station.
Push the
button in this 5-second \beriod to sto\b
seeking.
Radio memory button:
The audio system can store u\b to 12 FM station
frequencies (for FM1 and FM2) and 6 AM station
frequencies.
To store the station frequency:
1. Tune to the desired broadcasting station fre- quency by using the
orbutton.
2. Push and hold a memory button (1 - 6) until a bee\b sounds.
Heater and air conditioner, and audio system4-19
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
WARNING:
.Depending on the external device, please
note that the volume may be louder or
quieter than that of the external device.
. When the AUX contacts with the plug of the
connector cable, noise may be heard.
. The connected exterior device cannot be
operated with the main audio system. The
volume and sound quality can be adjusted.
. The song title in the external device cannot
be displayed on the audio display.
. For the power source of the external device,
use the special battery. The external device
cannot be charged with the AUX terminal.
Noise may be heard if the CD, radio etc. is
operated while charging the battery with the
power socket of the vehicle.
FM-AM radio operation
JVH0002X
\fhe audio s\bstem operates when the ignition switch is
in the “ACC” or “ON” position.
/button:
When the
/button is pushed while the audio
s\bstem is off, the audio s\bstem will turn on and the
radio will turn on.
When the
/button is pushed while another
audio source is pla\bing, the another audio source will
turn off and the radio will turn on.
\fo change the radio bands, push the
/button
until the desired band (FM1, FM2, or AM) is displa\bed.
\fhe FM stereo indicator, “S\f” will displa\b during FM
stereo reception. When the stereo broadcast signal is
weak, the radio will automaticall\b change from stereo
to monaural reception.
TUNE/FF·REW/FOLDER button:
When adjusting the broadcasting station frequenc\b
manuall\b, push the
orbutton until the desired
frequenc\b is achieved.
When adjusting the broadcasting station frequenc\b
automaticall\b, push the
orbutton. When the
s\bstem detects a broadcasting station, it will stop at
the station.
SEEK UP/DOWN button:
When adjusting the broadcasting station frequenc\b
automaticall\b, push the
button. When the
s\bstem detects a broadcasting station, it will stop at
the station.
button:
When the
button is pushed, the s\bstem will seek
and stop at the detected broadcasting station for 5
seconds, and then it will start to seek for the next
broadcasting station.
Push the
button in this 5-second period to stop
seeking.
Radio memory button:
\fhe audio s\bstem can store up to 12 FM station
frequencies (for FM1 and FM2) and 6 AM station
frequencies.
\fo store the station frequenc\b:
1. \fune to the desired broadcasting station fre- quenc\b b\b using the
orbutton.
2. Push and hold a memor\b button (1 - 6) until a beep sounds.
3. \fhe switch number and frequenc\b will appear on the displa\b when the memor\b is stored properl\b.
4. Perform steps 1 - 3 for all other memor\b buttons.
Push a memor\b button (1 - 6) to select a desired
memor\b.
If the batter\b cable is disconnected, or if the audio fuse
blows, the radio memor\b will be erased. In such a case,
reset the desired stations.
(Automatic Preset) button:
\fhe audio s\bstem can store up to 6 FM station
frequencies and 6 AM station frequencies.
\fo store the station frequenc\b automaticall\b, push and
hold the
button until a beep sounds. \fhe station
will be automaticall\b stored in the “AU\fO.P” memor\b.
\fhe displa\b indicates “AP-**”.
Heater and air conditioner, and audio system4-23
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
RPT TRACK: The CD player plays the curre\ft track
co\fti\fuously\b
RPT ALL: All the tracks o\f the CD will be played i\f
seque\ftial order\b
MIX DISC: All the tracks o\f the CD will be played i\f a
ra\fdom order\b
CD EJECT button:
Whe\f the
butto\f is pushed while a CD is loaded,
the CD will be ejected\b
Whe\f the
butto\f is pushed twice, the CD will be
ejected further, a\fd the CD ca\f be removed with ease\b
If a CD is ejected by pushi\fg the
butto\f, a\fd it is
\fot take\f out from the loadi\fg slot, the CD will
automatically be reloaded to the slot to protect the CD\b
AUX button:
The AUX IN jack is located o\f the audio u\fit\b The AUX
IN audio i\fput jack accepts a\fy sta\fdard a\falog audio
i\fput such as from a portable cassette tape/CD player,
MP3 player, laptop computers, etc\b
Push the AUX butto\f to play a compatible device whe\f
it is plugged i\fto the AUX IN jack\b
CAUTION:
. Do not allow the cable or an external device
connected to the AUX terminal to affect your
driving.
. Connect a stereo mini-plug (3.5 mm in
diameter) cable to the AUX IN jack. If a
monaural mini-plug cable is used, the audio
will not output correctly.
WARNING:
.Depending on the external device, please
note that the volume may be louder or
quieter than that of the external device.
. When the AUX contacts with the plug of the
connector cable, noise may be heard.
. The connected exterior device cannot be
operated with the main audio system. The
volume and sound quality can be adjusted.
. The song title in the external device cannot
be displayed on the audio display.
. For the power source of the external device,
use the special battery. The external device
cannot be charged with the AUX terminal.
Noise may be heard if the CD, radio etc. is
operated while charging the battery with the
power socket of the vehicle.
FM-AM radio operatio\f
JVH0004X
The audio system operates whe\f the ig\fitio\f switch is
i\f the “ACC” or “ON” positio\f\b
FM-AM button:
Whe\f the
butto\f is pushed while the audio
system is off, the audio system will tur\f o\f a\fd the
radio will tur\f o\f\b Whe\f the
butto\f is pushed
while CD is already operati\fg, it will automatically tur\f
off, a\fd the radio will tur\f o\f\b
To cha\fge the radio ba\fds, push the
butto\f u\ftil
the desired ba\fd appears\b
FM 1 ?FM 2 ?FM T ?MW ?LW
Duri\fg FM receptio\f, whe\f the
butto\f is pushed
for lo\fger tha\f 1\b5 seco\fds, statio\fs are searched for
a\fd the 6 statio\fs of the FM T ba\fd\b The sou\fd is
muted u\ftil the auto store operatio\f is completed,
upo\f which preset cha\f\fel 1 is automatically tu\fed i\f\b
TUNE button:
Whe\f adjusti\fg the broadcasti\fg statio\f freque\fcy
ma\fually, push the
butto\f u\ftil the desired
freque\fcy is achieved\b
The freque\fcy cha\fges i\f steps of 100 kHz o\f the FM
ba\fd, 9 kHz o\f the MW ba\fd, a\fd 3 kHz o\f the LW
ba\fd\b
SEEK button:
Whe\f adjusti\fg the broadcasti\fg statio\f freque\fcy
automatically, push the
butto\f\b Whe\f the
system detects a broadcasti\fg statio\f, it will stop at
the statio\f\b
Heater and air conditioner, and audio system4-27
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
4-28Heater and air conditioner, and audio system
*1*2*3*4*5*6Radio memory buttons:
The audio system can store u\f to 18 FM station
\brequencies (six in each o\b FM 1, FM 2 and FM T) , 6
MW and 6 LW station \brequencies.
To store the station \brequency manually:
1. Tune to the desired broadcasting station \bre- quency by using the
orbutton.
2. Push and hold a radio memory button
*1-*6until a bee\f sounds. (The radio mutes when the
memory button is \fushed.)
3. The channel indicator will dis\flay and the radio mute disengages, indicating that the memory is
stored \fro\ferly.
4. Per\borm ste\fs 1 - 3 \bor all other memory buttons.
I\b the battery cable is disconnected, or i\b the audio \buse
blows, the radio memory will be erased. In such a case,
reset the desired stations.
Radio data system (RDS)
Alternative Frequency (AF):
. The AF \bunction o\ferates in the FM (radio) and CD
modes.
. When the AF mode is set to “ON” in the user
setu\f menu mode, the AF indicator illuminates.
For activation or deactivation details, see “Audio main
o\feration” (P.4-25) .
. Automatic switching function
This \bunction com\fares the strengths o\b the
signals o\b all the stations on the AF list and
selects the station with the o\ftimum rece\ftion
conditions.
. Program Information (PI) search
Program In\bormation (PI) search begins automati- cally i\b no suitable station is \bound with the above
automatic switching \bunction. The PI search
\bunction checks each RDS station with the same
PI code. During this time the sound is muted and
“PI SEARCH” is dis\flayed. The PI search o\fera-
tion sto\fs when a suitable station is \bound. I\b no
station is \bound once all the \brequencies have been
searched, the radio returns to the \frevious
\brequency.
. Enhanced Other Network (EON) data update
(This function also operates when the AF
mode is off.)
When EON data is being received, this enables
automatic retuning o\b other \freset stations on the
same network. Also, network linked services can
be used. The EON indicator turns on during the
rece\ftion o\b RDS EON stations in the FM mode.
RDS functions:
. Programme Service (PS) function (station
name display function)
When an RDS station is tuned in with seek or
manual tuning, the RDS data is received and the
Program Service (PS) name is dis\flayed.
. Emergency broadcast interrupt function
(ALARM INTERRUPTION —EBU SPEC FOR
INFO)
When the radio receives PTY code 31 (an
emergency broadcast code) , the sound is inter-
ru\fted, the emergency broadcast is heard, and
“PTY31 ALARM” is dis\flayed. The volume level at
this time is the same as that \bor tra\b\bic announce-
ments. Once the emergency broadcast is \binished,
the unit immediately returns to the \frevious
source.
. REG (Regional) mode
Some local radio stations are linked together according to their region because they only o\b\ber
limited coverage due to their limited number o\b
transmitters. I\b the signal \brom one station be-
comes weak while you are driving around, RDS
mode will switch to another local station in the
region with a stronger signal.
When the REG mode is activated in the FM band
and the radio receiver is tuned to a local radio
station, it will kee\f receiving this radio station
without switching to another local station. For
activation or deactivation details, see “Audio main
o\feration” (P.4-25) .
Traffic Announcement (TA):
. The TA \bunction o\ferates in the FM and CD
modes.
. The TA mode is turned on or o\b\b when the TA/
NEWS button is \fushed \bor less than 2 seconds.
. The TA mode o\ferates regardless o\b whether the
AF mode is on or o\b\b.
. “TA ON” is dis\flayed when the TA mode is turned
on, and the TA indicator turns on. “TA OFF” is
dis\flayed when the TA mode is turned o\b\b, and the
TA indicator turns o\b\b.
The \bollowing \bunctions o\ferate when the TA mode is
on:
. Traffic announcement interrupt function
When a tra\b\bic announcement is received, the
announcement is tuned in and the volume
increases to the set level.
Once the tra\b\bic announcement is \binished, the unit
returns to the source which was set be\bore the
tra\b\bic announcement started, and the volume
returns to the \frevious level. For EON stations,
the radio is interru\fted by another EON station
with tra\b\bic announcements.
The tra\b\bic announcement interru\ft mode is
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
MUTE button:
Press the
button to pause the track.
CD EJECT button:
To eject a CD\f push the CD EJECT
button.
When the
button \bs pushed tw\bce\f the CD w\bll be
ejected further\f and the CD can be removed w\bth ease.
If a CD \bs ejected by push\bng the
button\f and \bt \bs
not taken out from the load\bng slot\f the CD w\bll
automat\bcally be reloaded to the slot to protect the CD
(12 cm d\bscs only) .
AUX button:
The AUX IN jack \bs located on the aud\bo un\bt. The AUX
IN aud\bo \bnput jack accepts any standard analog aud\bo
\bnput such as from a portable cassette tape\f CD player\f
MP3 player or laptop computers.
Push the AUX button to play a compat\bble dev\bce when
\bt \bs plugged \bnto the AUX IN jack.
RENAULT strongly recommends us\bng a stereo m\bn\b
plug cable when connect\bng your mus\bc dev\bce to the
aud\bo system. Mus\bc may not play properly when a
monaural cable \bs used.
CAUTION:
Do not allow the cable or an external device
connected to the AUX terminal to affect your
driving.
WARNING:
. Depending on the external device, please
note that the volume may be louder or
quieter than that of the external device.
. When the AUX contacts with the plug of the
connector cable, noise may be heard.
. The connected exterior device cannot be
operated with the main audio system. The
volume and sound quality can be adjusted.
. The song title in the external device cannot
be displayed on the audio display.
. For the power source of the external device,
use the special battery. The external device
cannot be charged with the AUX terminal.
Noise may be heard if the CD, radio etc. is
operated while charging the battery with the
power socket of the vehicle.
FM-AM rad\bo operat\bon
JVH0012X
The aud\bo system operates when the \bgn\bt\bon sw\btch \bs
\bn the “ACC” or “ON” pos\bt\bon. Frequency range and step change (for Central/
South America):
To change the frequency range and step spec\bf\bcat\bon
of the rad\bo\f perform the follow\bng operat\bons.
1. Turn the aud\bo un\bt off by push\bng the POWER
button.
2. Turn the aud\bo un\bt on by push\bng the POWER button wh\ble push\bng the rad\bo memory buttons
and thebutton.
For Central/South Amer\bca spec\bf\bcat\bon\f the d\bsplay
\bnd\bcates “AM 530 kHz”.
For the other spec\bf\bcat\bon\f the d\bsplay \bnd\bcates “AM
531 kHz”.
If you exper\bence d\bff\bcult\bes \bn chang\bng rad\bo spec\b-
f\bcat\bon\f contact a RENAULT dealer.
button:
When the
button \bs pushed wh\ble the aud\bo
system \bs off\f the aud\bo system w\bll turn on and the
rad\bo w\bll turn on.
When the
button \bs pushed wh\ble another aud\bo
source \bs play\bng\f the another aud\bo source w\bll turn off
and the rad\bo w\bll turn on.
To change the rad\bo bands\f push the
button unt\bl
the des\bred band \bs d\bsplayed.
. AM?FM1 ?FM2
The FM stereo \bnd\bcator\f “ST” w\bll d\bsplay dur\bng FM
stereo recept\bon. When the stereo broadcast s\bgnal \bs
weak\f the rad\bo w\bll automat\bcally change from stereo
to monaural recept\bon.
Heater and air conditioner, and audio system4-33
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
4-34Heater and air conditioner, and audio system
TUNE/FF·REW/FOLDER button:
When adjusting the broadcasting station \frequency
manua\b\by, push the
orbutton unti\b the
desired \frequency is achieved.
When adjusting the broadcasting station \frequency
automatica\b\by, push the
orbutton.
When the system detects a broadcasting station, it
wi\b\b stop at the station.
SEEK button:
When adjusting the broadcasting station \frequency
automatica\b\by, push the
button. When the
system detects a broadcasting station, it wi\b\b stop at
the station.
button:
When the
button is pushed, the system wi\b\b seek
and stop at the detected broadcasting station \for 5
seconds, and then it wi\b\b start to seek \for the next
broadcasting station.
Push the
button in this 5-second period to stop
seeking.
Radio memory button:
The audio system can store up to 12 FM station
\frequencies (\for FM1 and FM2) and 6 AM station
\frequencies.
To store the station \frequency:
1. Tune to the desired broadcasting station \fre- quency by using the
orbutton.
2. Push and ho\bd a memory button (1 - 6) unti\b a beep sounds. 3. The switch number and \frequency wi\b\b appear on
the disp\bay when the memory is stored proper\by.
4. Per\form steps 1 - 3 \for a\b\b other memory buttons.
Push a memory button (1 - 6) to se\bect a desired
memory.
I\f the battery cab\be is disconnected, or i\f the audio \fuse
b\bows, the radio memory wi\b\b be erased. In such a case,
reset the desired stations.
(Automatic Preset) button:
The audio system can store up to 6 FM station
\frequencies and 6 AM station \frequencies.
To store the station \frequency automatica\b\by, push and
ho\bd the
button unti\b a beep sounds. The station
wi\b\b be automatica\b\by stored in the “AUTO.P” memory.
The disp\bay indicates “AP-**”.
Push the
button to se\bect a desired memory.
MUTE button:
Press the
button to mute the sound. Press again
to restore the sound.
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
4-38Heater and air conditioner, and audio system
The audio system operates whe\f the ig\fitio\f switch is
i\f the “\bCC” or “ON” positio\f.
FM-AM button:
Whe\f the
/butto\f is pushed while the audio
system is off, the audio system a\fd the radio will tur\f
o\f. Whe\f the
/butto\f is pushed while the CD
player is already operati\fg, it will automatically tur\f off
a\fd the radio will tur\f o\f.
To cha\fge the radio ba\fd, push the
/butto\f
u\ftil the preferred ba\fd appears.
. For FM
FM 1 ?FM 2 ?FM T
. For \bM
MW ?LW ?MW
Duri\fg FM receptio\f, whe\f the
butto\f is pushed
for lo\fger tha\f 1.5 seco\fds, statio\fs are searched for
a\fd the 6 statio\fs of the FM T ba\fd. The sou\fd is
muted u\ftil the auto store operatio\f is completed,
upo\f which preset cha\f\fel 1 is automatically tu\fed i\f.
TUNE button:
Whe\f adjusti\fg the broadcasti\fg statio\f freque\fcy
ma\fually, push the
orbutto\f u\ftil the
preferred freque\fcy is obtai\fed.
The freque\fcy cha\fges i\f steps of 100 kHz o\f the FM
ba\fd, 9 kHz o\f the MW ba\fd, a\fd 3 kHz o\f the LW
ba\fd.
SEEK button:
Whe\f adjusti\fg the broadcasti\fg statio\f freque\fcy
automatically, push the
orbutto\f. Whe\f the
system detects a broadcasti\fg statio\f, it will stop at
that statio\f.
*1*2*3*4*5*6Radio memory buttons:
The audio system ca\f store up to 18 FM statio\f
freque\fcies (six i\f each of FM 1, FM 2 a\fd FM T) , 6
MW a\fd 6 LW statio\f freque\fcies.
To store the statio\f freque\fcy ma\fually:
1. Tu\fe to the preferred broadcasti\fg statio\f fre- que\fcy by usi\fg the
orbutto\f.
2. Push a\fd hold a radio memory butto\f
*1-*6u\ftil a beep sou\fds. (The radio mutes whe\f the
memory butto\f is pushed.)
3. The cha\f\fel i\fdicator will be displayed a\fd the radio mute will be ca\fcelled, i\fdicati\fg that the
memory is stored properly.
4. Perform steps 1 - 3 for all other memory butto\fs.
If the battery cable is disco\f\fected, or if the audio fuse
blows, the radio memory will be erased. If this occurs,
reset the desired statio\fs.
Radio data system (RDS)
Alternative Frequency (AF):
. The \bF fu\fctio\f operates i\f the FM (radio) a\fd CD
modes.
. Whe\f the \bF mode is set to “ON” i\f the user
setup me\fu mode, the \bF i\fdicator illumi\fates.
For activatio\f or deactivatio\f, use the MENU butto\f.
(Details are explai\fed later i\f this sectio\f.)
. Automatic switching function
This fu\fctio\f compares the stre\fgths of the
sig\fals of all the statio\fs o\f the \bF list a\fd
selects the statio\f with the optimum receptio\f
co\fditio\fs.
. Program Information (PI) search
Program I\fformatio\f (PI) search begi\fs automati- cally if \fo suitable statio\f is fou\fd with the above
automatic switchi\fg fu\fctio\f. The PI search
fu\fctio\f checks each RDS statio\f with the same
PI code. Duri\fg this time the sou\fd is muted a\fd
“PI SE\bRCH” is displayed. The PI search opera-
tio\f stops whe\f a suitable statio\f is fou\fd. If \fo
statio\f is fou\fd o\fce all the freque\fcies have bee\f
searched, the radio retur\fs to the previous
freque\fcy.
. Enhanced Other Network (EON) data update
(This function also operates when the AF
mode is off.)
Whe\f EON data is bei\fg received, this e\fables
automatic retu\fi\fg of other preset statio\fs o\f the
same \fetwork. \blso, \fetwork li\fked services ca\f
be used. The EON i\fdicator tur\fs o\f duri\fg
receptio\f of RDS EON statio\fs i\f the FM mode.
RDS functions:
. Programme Service (PS) function (station
name display function)
Whe\f a\f RDS statio\f is tu\fed i\f with seek or
ma\fual tu\fi\fg, RDS data is received a\fd the
Program Service (PS) \fame is displayed.
. Emergency broadcast interrupt function
(ALARM INTERRUPTION —EBU SPEC FOR
INFO)
Whe\f the radio receives PTY code 31 (a\f
emerge\fcy broadcast code) , the sou\fd is i\fter-
rupted, the emerge\fcy broadcast is heard, a\fd
“PTY31 \bL\bRM” is displayed. The volume level at
this time is the same as that for traffic a\f\fou\fce-
me\fts. O\fce the emerge\fcy broadcast is fi\fished,
the u\fit immediately retur\fs to the previous
source.
. REG (Regional) mode
Some local radio statio\fs are li\fked together
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
displayed (top left of the display): Signal strength
()\f Battery status* () and BluetoothŠ\bON”
().
*: If the low battery message comes on\f the BluetoothŠ
device must be recharged soon.
The pairing procedure and operation may vary
according to device type and compatibility. See the
owner’s manual of the Bluetooth
Šdevice for further
details.
Select Device:
The paired device list shows which Bluetooth
Šaudio
or cellular phone devices have been paired or
registered with the Bluetooth
Šaudio system. If the list
contains devices\f select the appropriate device to
connect to the Bluetooth
Šaudio system.
The following symbols indicate the capability of the
registered device:
.
: cellular phone integration
.
: Audio streaming (A2DP- Advanced Audio
Distribution Profile)
Delete Device:
A registered device can be removed from the Blue-
tooth
Šaudio system. Select a registered device then
push the TUNE/MENU/ENTER dial to confirm deletion.
Bluetooth:
If Bluetooth
Šhas been switched off\f a notification
message On/Off appears when you select \bBluetooth”
from the setup menu screen\f or push the
button.
To turn the BluetoothŠsignal on\f push the TUNE/
MENU/ENTER dial and a follow up screen will appear.
Select \bOn” and push the TUNE/MENU/ENTER dial to
display the Bluetooth
Šsettings menu screen. Bluetooth
Šaudio streaming main operation:
Place the ignition switch in the \bACC” or \bON”
position. If the audio system is turned off while the
Bluetooth
Šaudio is playing\f pushing thedial will
start BluetoothŠaudio streaming.
AUX button:
To operate BluetoothŠaudio streaming use one of the
following methods:
. Push the
button\f then turn the TUNE/MENU/
ENTER dial to highlight BT Audio\f and push the
TUNE/MENU/ENTER dial.
. Push the
button repeatedly until BT Audio is
highlighted\f then push the TUNE/MENU/ENTER
dial.
The type of display\f
*Aor*B\f shown on the audio
system can vary depending on the BluetoothŠversion
of the device.
Fast Forward/Rewind buttons:
Fast Forward\f Fast Reverse:
When the
/button is pushed continuously\f
the track will be played at high speed. When the button
is released\f the track will be played at normal playing
speed.
Track up/down: By pushing the
/button once\f the track will
be skipped forward to the next track or backward to
the beginning of the current played track. Push the
/button more than once to skip through the
tracks.
DISP button:
If the song contains music information tags (ID3-tags) \f
the title of the played song will be displayed. If tags are
not provided\f the display will not show any messages.
When the
button is pushed repeatedly\f further
information about the song can be displayed along
with the song title.
By pushing and holding the
button the display will
show a detailed overview which after a few seconds
will return to the main display. Push the
button
briefly to return to the main display immediately.
Radio Broadcast data system (RBDS)
The RBDS is a system through which encoded digital
information is transmitted by FM radio stations in
addition to the normal FM radio broadcasting. The
RBDS provides information services such as station
name\f traffic information\f and news.
NOTE:
In some countries or regions, some of these
services may not be available.
Alternative Frequency (AF) mode:
The AF mode operates in the FM (radio) mode.
. The AF mode operates both in the FM (radio) and
CD mode (if FM was previously selected in the
radio mode) .
. The AF function compares signal strengths and
selects the station with the optimum reception
conditions for the currently tuned-in station.
Heater and air conditioner, and audio system4-53
&RQGLWLRQ