fuel RENAULT PULSE 2012 1.G User Guide


> (GLW    0RGHO .$2(0B5HQDXOW @
2-4Instruments and controls
RIGHT-HAND DRIVE (RHD) MODEL (Ty\fe B)
JV\b0225X
1. Side ventilator
2. U\f\fer instrument box*
3. Passenger’s front-im\fact air bag*
4. Audio system*
5. Rear window defogger switch*
6. Hazard indicator flasher switch
7. Heater and air conditioner* control
8. \benter ventilator9. Wi\fer and washer switch
10. Steering-wheel-mou\ynted controls (left side)*
— Audio control*
— Bluetooth
ŠHands-Free Phone System con-
trol (without navigation system)*
— Bluetooth
ŠHands-Free Phone System con-
trol (with navigation system)**
11. Meters and gauges 12. Driver’s front-im\fact air bag*/Horn
13. Steering-wheel-mou\ynted controls (right side)*
— \bruise control switches*
— S\feed limiter switches*
14. Headlight, fog light* and turn signal switch
15. Outside rearview mirror control switch*
16. Fuse box
17. Glove box
18. Power outlet*/USB/AUX connector*
19. \bu\f holder
20. Selector lever or Shift lever — Automatic Transmission (AT) model
— \bontinuously Variable Transmission (\bVT)
model
— Manual Transmission (MT) model
21. Push-button ignition switch (model with Intelli- gent Key system)
22. Tilting steering wheel lock lever*
23. Ignition switch (model without Intelligent Key system)/steering lock
24. Hood lock release handle
25. Fuel filler lid release handle
26. Parking s\face measurement switch*
27. Vehicle Dynamic \bontrol (VD\b) OFF switch*
28. Headlight aiming control switch*
*: if equi\f\fed
**: Refer to the se\farate Navigation Owner’s Manual (if
equi\f\fed) .
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
RIGHT-HAND DRIVE (RHD) MODEL (Type \f)
JV\f044\bX
Example1. Side ventilator
2. Upper instrument box*
3. Passenger’s front-impact air bag*
4. Audio system*
5. Rear window defogger switch*
6. Hazard indicator flasher switch
7. Heater and air conditioner* control
8. \fenter ventilator\b. Wiper and washer switch
10. Steering-wheel-mounted\e controls (left side)*
— Audio control*
— Bluetooth
ŠHands-Free Phone System con-
trol (without navigation system)*
11. Meters and gauges
12. Driver’s front-impact air bag*/Horn
13. Headlight, fog light* and turn signal switch 14. Outside rearview mirror control switch*
15. Fuse box
16. Glove box
17. USB/AUX connector*
18. Power outlet*
1\b. \fup holder
20. Shift lever
— \fontinuously Variable Transmission (\fVT)
model
— Manual Transmission (MT) model
21. Push-button ignition switch (model with Intelli- gent Key system)
22. Tilting steering wheel lock lever
23. Ignition switch (model without Intelligent Key system)/steering lock
24. Hood lock release handle
25. Fuel filler lid release handle
26. Idling Stop OFF switch* (Not applied to RENAULT)
27. Headlight aiming control switch*
*: if equipped
Instruments and controls2-5
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
2-6Instruments and controls
SIC4425
Type A1. Speedometer
2. Trip odometer re\fet \fwitch\btrip computer mode\fwitch
3. Clock adju\fting knob
4. Odometer\btwin trip odometer\btrip computer\b clock
5. Fuel gauge
METERS AND GAUGES
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
JVC0008X
Type B1. Tachometer
2. S\feedometer
3. Tri\f odometer re\bet \bwitch/tri\f com\futer mode\bwitch
4. Clock adju\bting knob
5. Automatic Tran\bmi\b\bion (AT)/Continuou\bly Vari- able Tran\bmi\b\bion (CVT) \fo\bition indicator*/
Cru\be control and \b\feed limiter di\b\flay*
6. Odometer/twin tri\f odometer/tri\f com\futer/ clock 7. Fuel gauge
*: if equi\f\fed
Instruments and controls2-7
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
Odometer/Twin trip odometer (for Type C)
J\fI0002\bType CThe odometer/twin trip odometer is displayed when
the ignition switch is in the “ON” position.
The odometer
*1displays the total distance the
vehicle has been driven. When the odometer displays,
the display of TRIP A and B disappears.
The twin trip odometer
*2displays the distance of
individual trips.
Changing twin trip odometer display:
Push the reset switch
*3to change the display as
follows:
ODO ?TRIP A ?TRIP B ?ODO
Resetting twin trip odometer:
Push the reset switch
*3for more than 1 second to
reset the trip odometer to zero.
For trip computer information, see “Trip computer (for
Type C)” (P.2-25) .
TRIP COMPUTER (for Type A and B)
SIC4441Type A and BThe switch for the trip computer is located on the
meter panel.
When the ignition switch is placed in the “ON”
position, modes of the trip computer can be selected
by pushing the trip computer mode switch
*A.
Each time the trip computer mode switch
*Ais
pushed, the display will change as follows:
ODO ?(TRIP A ?TRIP B) ?Current fuel
consumption ?Average fuel consumption ?Dis-
tance to empty (dte)
Current fuel consumption (l/100 km, km/l or
mpg)
The current fuel consumption mode shows the current
fuel consumption.
Average fuel consumption (l/100 km, km/l or
mpg)
The average fuel consumption mode shows the
average fuel consumption since the last reset. Reset-
ting is done by pushing the trip computer mode switch
*Afor longer than 1 second.
The display is updated every 30 seconds. At about the
first 500 m after a reset, the display shows “----”.
Distance to empty (dte — km or mls)
The distance to empty (dte) mode provides you with an
estimation of the distance that can be driven before
refueling. The dte is constantly being calculated, based
on the amount of fuel in the fuel tank and the actual fuel
consumption.
The display is updated every 30 seconds.
The dte mode includes a low range warning feature:
when the fuel level is low, the dte mode is automatically
selected and the digits blink in order to draw the
driver’s attention. Push the trip computer mode switch
*Ato return to the mode that was selected before the
warning occurred.
When the fuel level drops even lower, the dte display
will change to “----”.
. If the amount of fuel added is small, the
display just before the ignition switch is
turned off may continue to be displayed.
. When driving uphill or rounding curves, the
fuel in the tank shifts, which may momenta-
rily change the display.
Instruments and controls2-9
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
2-10Instruments and controls
Resetting displays
When the ave\fage fuel c\bnsumpti\bn \b\f TRIP B is
displayed, push the t\fip c\bmpute\f m\bde switch*Af\b\f
l\bnge\f than 3 sec\bnds. The display \bf ave\fage fuel
c\bnsumpti\bn and t\fip \bd\bmete\f (TRIP B \bnly) will be
\feset at the same time.
TACHOMETER (if equipped)
SIC4428
The tach\bmete\f indicates the engine speed in \fev\blu-
ti\bns pe\f minute (\fpm) .
Do not rev the engine into the red zone.
FUEL GAUGE
SIC4429Type A and B
JVC0024XType CF\b\f Type A and B: The fuel gauge*Aindicates the
app\f\bximate fuel level in the tank when the igniti\bn
switch is in the “ON” p\bsiti\bn.
The gauge may m\bve slightly du\fing b\faking, tu\fning,
accele\fating, \b\f g\bing up and d\bwn hills due t\b
m\bvement \bf fuel in the tank.
The fuel gauge
*Aand the l\bw fuel wa\fning light in
the mete\f (if equipped) blink when the fuel level in the
tank is getting l\bw. Refuel as s\b\bn as it is c\bnvenient,
bef\b\fe the gauge \feads 0.
F\b\f Type C: The fuel gauge
*Bindicates the app\f\bximate fuel level in the tank when the igniti\bn
switch is in the “ON” p\bsiti\bn.
The gauge may m\bve slightly du\fing b\faking, tu\fning,
accele\fating, \b\f g\bing up and d\bwn hills due t\b
m\bvement \bf fuel in the tank.
The l\bw fuel wa\fning light in the mete\f illuminates when
the fuel level in the tank is getting l\bw. Refuel as s\b\bn
as it is c\bnvenient, bef\b\fe the gauge \feads 0.
The a\f\f\bw,
, indicates the fuel fille\f lid is l\bcated \bn
the left side \bf the vehicle.
CAUTION:
Refuel before the gauge reads the empty (0)
position.
AUTOMATIC TRANSMISSION (AT)/CON-
TINUOUSLY VARIABLE TRANSMISSION
(CVT) POSITION INDICATOR (if equipped)
JVC0031XType B and CThe Aut\bmatic T\fansmissi\bn (AT)/C\bntinu\busly Va\fi-
able T\fansmissi\bn (CVT) p\bsiti\bn indicat\b\f*Ain-
dicates the select\b\f leve\f p\bsiti\bn when the igniti\bn
switch is in the “ON” p\bsiti\bn.
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
2-12Instruments and controls
Anti-lock Braking Syste\f (ABS) warning
lig\bt*Seat belt warning lig\bt*Overdrive off indicator lig\bt*
Brake warning lig\btSupple\fental Restraint Syste\f (SRS) air
bag warning lig\bt*Rear fog lig\bt indicator lig\bt*
C\barge warning lig\btWater-in-fuel-filter warning lig\bt (diesel en-
gine \fodel)Security indicator lig\bt*
Door open warning lig\bt*Cruise control on indicator lig\bt*Slip indicator lig\bt*
Electric power steering warning lig\btCruise control/speed li\fiter set indicator
lig\bt*Speed li\fiter indicator lig\bt*
Engine oil pressure warning lig\btElectronic Stability Progra\f (ESP) off in-
dicator lig\bt*SPORT \fode indicator lig\bt*
Hig\b te\fperature warning lig\bt (red)Front fog lig\bts indicator lig\bt*Stop/Start Syste\f indicator lig\bt (if equipped
for Europe)/Idling Stop Syste\f indicator lig\bt
(if equipped for T\bailand)
Intelligent Key syste\f warning lig\bt*Front passenger air bag status lig\bt*Turn signals/\bazard indicator lig\bts
Low fuel warning lig\bt*Glow plug indicator lig\bt (diesel engine
\fodel)Ve\bicle Dyna\fic Control (VDC) off indicator
lig\bt*
Malfunction warning lig\bt (red) (diesel en-
gine \fodel)Hig\b bea\f indicator lig\bt*: if equipped
Master warning lig\bt*Low te\fperature indicator lig\bt (green)*
P position selecting warning lig\bt*Malfunction Indicator Lig\bt (MIL)
WARNING/INDICATOR LIGHTS AND
AUDIBLE REMINDERS
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
Low fuel warning light (if equipped)
\fhe low fuel warning light illuminates when the fuel
level in the tan\b is getting low. Refuel as soon as it is
convenient, before the fuel gauge reaches the empty
(0) position. \fhere will be a small reserve of fuel
remaining in the tan\b when the fuel gauge reaches the
empty (0) position.
Malfunction warning light (red) (diesel
engine model)
When the ignition switch is placed in the “ON”
position, the malfunction warning light illuminates in
red. \fhis means that the system is operational. After
starting the engine, the warning light turns off.
For the orange Malfunction Indicator Light (MIL) , see
“Malfunction Indicator Light (MIL)” (P.2-17)for details.
If the malfunction warning light (red) illuminates
continuously while the engine is running, it may
indicate an engine control system malfunction. Have
your vehicle inspected by a RENAUL\f dealer. You do
not need to have your vehicle towed to the dealer.
CAUTION:
Continuing vehicle operation without proper
servicing of the engine control system could
lead to poor driveability, reduced fuel economy,
and damage to the engine control system, which
may affect the vehicle’s warranty coverage.
Master warning light (if equipped)
When the ignition switch is in the “ON” position, the
master warning light illuminates if any of the following
are displayed on the vehicle information display.
. Seat belt warning
. NO KEY warning
. Low fuel warning
. Par\bing bra\be release warning
. Door/bac\b door open warning
(See “Vehicle information display” (P.2-20) .)
P position selecting warning light (if
equipped)
\fhe warning light blin\bs in red when the ignition switch
is pushed to stop the engine with the selector lever in
any position except the “P” (Par\b) position.
If this warning appears, move the selector lever to the
“P” (Par\b) position or push the ignition switch to the
“ON” position.
An inside warning chime will also sound.
See “Intelligent Key system” (P.3-9) .
Seat belt warning light (if equipped)
When the ignition switch is in the “ON” position, the
seat belt warning light illuminates. \fhe light will
continue to illuminate until the driver’s seat belt is
fastened. (See “Seat belts” (P.1-7) .) For China:
When the vehicle speed exceeds 15 \bm/h (10 MPH) ,
the light will blin\b unless the driver’s seat belt is
securely fastened.
Except for China:
When the vehicle speed exceeds 15 \bm/h (10 MPH) ,
the light will blin\b and the chime will sound unless the
driver’s seat belt is securely fastened. \fhe chime will
continue to sound for about 90 seconds until the seat
belt is fastened.
Supplemental Restraint System (SRS)
air bag warning light (if equipped)
When the ignition switch is in the “ON” or “S\fAR\f”
position, the Supplemental Restraint System (SRS) air
bag warning light illuminates for about 7 seconds and
then turns off. \fhis indicates that the SRS air bag
system is operational.
If any of the following conditions occur, the SRS air
bag system and/or pre-tensioner seat belt need
servicing. Have the system chec\bed, and if necessary
repaired, by a RENAUL\f dealer promptly.
. \fhe SRS air bag warning light remains illuminated
after about 7 seconds.
. \fhe SRS air bag warning light flashes intermit-
tently.
. \fhe SRS air bag warning light does not illuminate
at all.
Unless chec\bed and repaired, the SRS air bag system
and/or pre-tensioner seat belt may not function
properly. (See “Supplemental Restraint System
(SRS)” (P.1-25) .)
Instruments and controls2-15
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
2-16Instruments and controls
Water-in-fuel-filte\or warning light (for
\fiesel engine mo\fel)
\bf the water-in-fuel-filt\oer warning light illuminates while
the engine is running, \frain the water from the fuel filter
promptly. (See “Fuel filter (\fiesel engine mo\fel)” (P.8-
15) .)
CAUTION:
Continuing vehicle operation without properly
draining could cause serious damage to the
engine.
\bND\bCATOR L\bGHTS
Cruise control on in\ficator light (if
equippe\f)
The cruise control on in\ficator light in\ficates the
activation of the cruise control system.
When the cruise control main switch is turne\f on, the
in\ficator light will illuminate, in\ficating the cruise
control system is in the stan\fby mo\fe. (See “Cruise
control” (P.5-28) .)
Cruise control/spee\f limiter set in\fi-
cator light (if equippe\f)
The cruise control/spee\f limiter set in\ficator light
in\ficates the status of the cruise control system.
When the vehicle spee\f is controlle\f by the cruise
control/spee\f limiter system, the in\ficator light illumi-
nates.
\bf the cruise control/spee\f limiter set in\ficator light
blinks while the engine is running, or while \friving, it
may in\ficate the cruise control/spee\f limiter system is not functioning properly an\f may nee\f servicing. Have
the system checke\f, an\f if necessary repaire\f, by a
RENAULT \fealer promptly. (See “Cruise control” (P.5-
28) an\f “Spee\f limiter (if equippe\f for Europe)” (P.5-
26) .)
Electronic Stability Program (ESP) off
in\ficator light (if equippe\f)
The Electronic Stability Program (ESP) off in\ficator
light illuminates when the ESP off switch is pushe\f to
the “OFF” position.
When the ESP off switch is pushe\f to the “OFF”
position, the ESP system is turne\f off.
\bf the ESP off in\ficator light an\f slip in\ficator light
illuminate while the engine is running or while \friving, it
may in\ficate the ESP system is not functioning
properly an\f may nee\f servicing. Have the system
checke\f, an\f if necessary repaire\f, by a RENAULT
\fealer promptly. (See “Electronic Stability Program
(ESP) System (if equippe\f for Europe)” (P.5-25) .)
Front fog lights in\ficator light (if
equippe\f)
The front fog lights in\ficator light illuminates when the
front fog lights are on. (See “Fog light switch” (P.2-
32) .)
Front passenger air bag status light (if
equippe\f)
The front passenger air bag status light locate\f on the
instrument panel will illuminate when the front passen-
ger air bag is turne\f off with the front passenger air
bag switch. When the front passenger air bag is turne\f
on, the front passenger air bag status light will turn off. For more \fetails, see “Supplemental Restraint System
(SRS)” (P.1-25) .
Glow plug in\ficator light (\fiesel engine
mo\fel)
When the ignition switch is in the “ON” position, the
glow plug in\ficator light illuminates an\f turns off after
the glow plugs have warme\f up.
\bf the glow plugs have alrea\fy warme\f up, the glow
plug in\ficator flashes briefly an\f then turns off.
High beam in\ficator light
The high beam in\ficator light illuminates when the
hea\flight high beam is “ON”. The in\ficator turns off
when the low beam is selecte\f. (See “Hea\flight an\f
turn signal switch” (P.2-29) .)
Low temperature in\ficator light (green)
*
The low temperature in\ficator light illuminates when
the engine coolant temperature is low.
When the ignition switch is in the “ON” position, the
low temperature in\ficator light illuminates an\f then
turns off after the engine coolant has warme\f up.
\bf the low temperature in\ficator light stays illuminate\f
after the engine has sufficiently warme\f up, it may
in\ficate the low temperature sensor in the engine
coolant system is not functioning properly an\f may
nee\f servicing. Have the system checke\f, an\f if
necessary repaire\f, by a RENAULT \fealer promptly.
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
Malfunction Indicator Light (MIL)
Wh\fn th\f ignition switch is in th\f “\bN” position, th\f
Malfunction Indicator Light (MIL) illuminat\fs. Aft\fr
starting th\f \fngin\f, th\f MIL turns off. This indicat\fs
that th\f \fngin\f control syst\fm is op\frational.
If th\f MIL illuminat\fs or blinks (if \fquipp\fd) whil\f th\f
\fngin\f is running, it may indicat\f that th\f \fngin\f
control syst\fm is not functioning prop\frly and may
n\f\fd s\frvicing. Hav\f th\f syst\fm ch\fck\fd, and if
n\fc\fssary r\fpair\fd, by a RENAULT d\fal\fr promptly.
Malfunction Indicator Light (MIL) on steady:
An \fngin\f control syst\fm malfunction has b\f\fn
d\ft\fct\fd. Hav\f th\f v\fhicl\f ch\fck\fd, and if n\fc\fssary
r\fpair\fd, by a RENAULT d\fal\fr promptly. You do not
n\f\fd to hav\f your v\fhicl\f tow\fd to th\f d\fal\fr.
Malfunction Indicator Light (MIL) blinking (if
equipped):
An \fngin\f misfir\f has b\f\fn d\ft\fct\fd which may
damag\f th\f \fngin\f control syst\fm. Hav\f th\f v\fhicl\f
ch\fck\fd, and if n\fc\fssary r\fpair\fd, by a RENAULT
d\fal\fr promptly.
To r\fduc\f or avoid possibl\f damag\f to th\f \fngin\f
control syst\fm wh\fn th\f MIL illuminat\fs or blinks:
.Avoid driving at sp\f\fds abov\f 70 km/h (43 MPH) .
. Avoid sudd\fn acc\fl\fration or d\fc\fl\fration.
. Avoid going up st\f\fp uphill grad\fs.
. Avoid carrying or towing unn\fc\fssary loads.
CAUTION:
.Continuing vehicle operation without proper
servicing of the engine control system could
lead to poor driveability, reduced fuel econ-
omy, and damage to the engine control system, which may affect the vehicle’s
warranty coverage.
. Incorrect setting of the engine control sys-
tem may lead to non-compliance of local
and national emission laws and regulations.
\bv\frdriv\f off indicator light (if
\fquipp\fd)
Th\f ov\frdriv\f off indicator light illuminat\fs wh\fn th\f
ov\frdriv\f is turn\fd \bFF. (S\f\f “Driving with Automatic
Transmission (AT)” (P.5-11) for th\f us\f of th\f ov\frdriv\f
off switch.)
R\far fog light indicator light (if
\fquipp\fd)
Th\f r\far fog light indicator light illuminat\fs wh\fn th\f
r\far fog light is on. (S\f\f “Fog light switch” (P.2-32) .)
S\fcurity indicator light (if \fquipp\fd)
Th\f s\fcurity indicator light blinks wh\fn th\f ignition
switch is in th\f “L\bCK”, “\bFF” or “ACC” position. This
function indicat\fs th\f Anti-Th\fft Syst\fm* \fquipp\fd on
th\f v\fhicl\f is op\frational.
(* immobiliz\fr)
If Anti-Th\fft Syst\fm is malfunctioning, this light will
r\fmain on whil\f th\f ignition switch is in th\f “\bN”
position. (S\f\f “S\fcurity syst\fm” (P.3-16) for additional
information.)
Slip indicator light (if \fquipp\fd)
Wh\fn th\f ignition switch is in th\f “\bN” position, th\f
slip indicator light illuminat\fs and th\fn turns off. This
indicat\fs that th\f V\fhicl\f Dynamic Control (VDC)
syst\fm or El\fctronic Stability Program (ESP) syst\fm is
op\frational.
Th\f slip indicator light blinks wh\fn th\f VDC or ESP
syst\fm is op\frating.
Wh\fn th\f indicator light blinks whil\f driving, th\f driving
condition is slipp\fry and th\f v\fhicl\f’s traction limit is
about to b\f \fxc\f\fd\fd.
If th\f VDC or ESP off indicator light and slip indicator
light illuminat\f whil\f th\f \fngin\f is running or whil\f
driving, it may indicat\f that th\f VDC or ESP syst\fm is
not functioning prop\frly and may n\f\fd s\frvicing. Hav\f
th\f syst\fm ch\fck\fd, and if n\fc\fssary r\fpair\fd, by a
RENAULT d\fal\fr promptly. (S\f\f “V\fhicl\f Dynamic
Control (VDC) syst\fm (if \fquipp\fd \fxc\fpt for Europ\f)”
(P.5-24) or “El\fctronic Stability Program (ESP) Syst\fm
(if \fquipp\fd for Europ\f)” (P.5-25) .)
Sp\f\fd limit\fr indicator light (if
\fquipp\fd)
This light illuminat\fs wh\fn th\f sp\f\fd limit\fr main
switch is push\fd. Th\f light turns off wh\fn th\f main
switch is push\fd again. Wh\fn th\f sp\f\fd limit\fr main
switch indicator light illuminat\fs, th\f sp\f\fd limit\fr
syst\fm is op\frational. (S\f\f “Sp\f\fd limit\fr (if \fquipp\fd
for Europ\f)” (P.5-26) .)
Instruments and controls2-17
&RQGLWLRQ