RENAULT TWINGO RS 2009 2.G Electrical Equipment - Multimedia Connection Owner's Manual

86C-21V1 MR-413-X44-86C000$080.mif
86C
CBOX
Vdiag No.: 04
Tool faultAssociated DTCDiagnostic tool title
DF0019341Computer configuration
DF0029343Computer
DF0039344Computer
DF004 93F0Battery voltage
DF005935DUSB controller
DF0069332Digital terminal connection
DF00793D9USB function
DF008932AUSB supply
MULTIMEDIA CONNECTION
Fault finding – Fault summary table

86C-22
AFTER REPAIRCarry out another fault finding check on the system.
Clear the stored faults using command RZ001 Fault memory.
Deal with any other faults.
V1 MR-413-X44-86C000$090.mif
86C
CBOX
Vdiag No.: 04
DF001
PRESENT
OR
STOREDCOMPUTER CONFIGURATION
1.DEF: Blank or incomplete configuration
NOTESCheck whether the system is correctly configured (see Configuration and
Programming).
Check the system configuration in relation to the vehicle equipment (see Configuration and Programming).
If the fault persists, contact your Techline.
CBOX_V04_DF001
MULTIMEDIA CONNECTION
Fault finding – Interpretation of faults

86C-23
AFTER REPAIRCarry out another fault finding check on the system.
Clear the stored faults using command RZ001 Fault memory.
Deal with any other faults.
V1 MR-413-X44-86C000$090.mif
MULTIMEDIA CONNECTION
Fault finding – Interpretation of faults86C
CBOX
Vdiag No.: 04
DF002
PRESENT
OR
STOREDCOMPUTER
1.DEF: Internal electronic fault
NOTESNone.
Replace the mobile connectivity computer (see MR 392 (Clio III) or MR 411 (New Twingo) 86A, Radio, Offset
multimedia socket computer: Removal – Refitting).
If the fault persists, contact your Techline.
CBOX_V04_DF002

86C-24
AFTER REPAIRCarry out another fault finding check on the system.
Clear the stored faults using command RZ001 Fault memory.
Deal with any other faults.
V1 MR-413-X44-86C000$090.mif
MULTIMEDIA CONNECTION
Fault finding – Interpretation of faults86C
CBOX
Vdiag No.: 04
DF003
PRESENT
OR
STOREDCOMPUTER
1.DEF: Internal electronic fault
NOTESNone.
Replace the mobile connectivity computer (see MR 392 (Clio III) or MR 411 (New Twingo) 86A, Radio, Offset
multimedia socket computer: Removal – Refitting).
If the fault persists, contact your Techline.
CBOX_V04_DF003

86C-25
AFTER REPAIRCarry out another fault finding check on the system.
Clear the stored faults using command RZ001 Fault memory.
Deal with any other faults.
V1 MR-413-X44-86C000$090.mif
MULTIMEDIA CONNECTION
Fault finding – Interpretation of faults86C
CBOX
Vdiag No.: 04
DF004
PRESENT
OR
STOREDBATTERY VOLTAGE
1.DEF: Undervoltage
NOTESConditions for applying fault finding procedures to stored faults:
The fault is declared present after:
–The + after ignition feed is activated,
–The multimedia system is switched on using the on/off button.
–The battery voltage is out of range (12 V < X < 15 V).
Use the Wiring Diagrams Technical Note for Clio III or New Twingo.
Remove the card from the reader or the key from the ignition, then check the condition of the battery.
Check the battery: leaks, incorrectly fitted, loosened battery terminal, and corrosion.
Check the earth connections of the vehicle: battery/chassis, engine/chassis, starter/engine, alternator/engine,
gearbox/chassis.
If the fault is detected, resolve the abnormal contact fault.
Check the battery and perform an alternator supply test (see 16A, Starting, Charging).
Check the conformity of the fuse of the fuse and relay box (use the Wiring Diagrams Technical Note for Clio III
or New Twingo):
–for New Twingo: F48 (15A),
–for Clio III: unit fuse 710 (15A) and F2 (20A) on component 260.
Replace the fuse if not correct.
Disconnect the connector of the mobile connectivity computer, component code 1959.
Check the continuity of the earth on connection NAM.
If the connections are faulty and there is a repair procedure (see Technical Note 6015A, Electrical wiring repair,
Wiring: Precautions for repair), repair the wiring, otherwise replace it.
CBOX_V04_DF004

86C-26
AFTER REPAIRCarry out another fault finding check on the system.
Clear the stored faults using command RZ001 Fault memory.
Deal with any other faults.
V1 MR-413-X44-86C000$090.mif
MULTIMEDIA CONNECTION
Fault finding – Interpretation of faults86C
CBOX
Vdiag No.: 04
DF004
CONTINUED
Check the insulation against earth and the absence of interference resistance on the connection:
•BCP4 between components 260 and 1959 (for New Twingo),
•BCP4 between components 710 and 1959 (for Clio III)
If the connection or connections are faulty and there is a repair procedure (see Technical Note 6015A, Electrical
wiring repair, Wiring: Precautions for repair), repair the wiring, otherwise replace it.
For Clio III only:
Check the insulation against earth and the absence of interference resistance on the connection:
•BP69 between components 710 and 260.
If the connection or connections are faulty and there is a repair procedure (see Technical Note 6015A, Electrical
wiring repair, Wiring: Precautions for repair), repair the wiring, otherwise replace it.
If the fault persists, contact your Techline.

86C-27
AFTER REPAIRCarry out another fault finding check on the system.
Clear the stored faults using command RZ001 Fault memory.
Deal with any other faults.
V1 MR-413-X44-86C000$090.mif
MULTIMEDIA CONNECTION
Fault finding – Interpretation of faults86C
CBOX
Vdiag No.: 04
DF005
PRESENT
OR
STOREDUSB CONTROLLER
1.DEF: Internal electronic fault
NOTESNone.
Replace the mobile connectivity terminal (see MR 392 (Clio III) or MR 411 (New Twingo) 86A, Radio, Offset
audio socket: Removal – Refitting).
If the fault persists, contact your Techline.
CBOX_V04_DF005

86C-28
AFTER REPAIRCarry out another fault finding check on the system.
Clear the stored faults using command RZ001 Fault memory.
Deal with any other faults.
V1 MR-413-X44-86C000$090.mif
MULTIMEDIA CONNECTION
Fault finding – Interpretation of faults86C
CBOX
Vdiag No.: 04
DF006
PRESENT
OR
STOREDDIGITAL TERMINAL CONNECTION
CO: Open circuit
NOTESConditions for applying fault finding procedures to stored faults:
The fault is declared present after the multimedia system was switched on using the
radio on/off button.
Use the Wiring Diagrams Technical Note for Clio III or New Twingo.
Check the connection and condition of the connectors of the mobile connectivity computer, component code
1959 and of the mobile connectivity terminal, component code 1877.
If the connectors are faulty and if there is a repair procedure (see Technical Note 6015A, Repairing electrical
wiring, Wiring: Precautions for repair), repair the connector, otherwise replace the wiring.
Disconnect the computer connector and check the insulation, continuity and the absence of interference
resistance on the following connections:
–34PE between components 1959 and 1877,
–34PH between components 1959 and 1877,
–34PG between components 1959 and 1877,
–34PJ between components 1959 and 1877,
–34TE between components 1959 and 1877,
–34TJ between components 1959 and 1877,
–34TH between components 1959 and 1877,
–34TG between components 1959 and 1877.
If the connection or connections are faulty and there is a repair procedure (see Technical Note 6015A, Electrical
wiring repair, Wiring: Precautions for repair), repair the wiring, otherwise replace it.
CBOX_V04_DF006

86C-29
AFTER REPAIRCarry out another fault finding check on the system.
Clear the stored faults using command RZ001 Fault memory.
Deal with any other faults.
V1 MR-413-X44-86C000$090.mif
MULTIMEDIA CONNECTION
Fault finding – Interpretation of faults86C
CBOX
Vdiag No.: 04
DF006
CONTINUED
Replace the mobile connectivity terminal (see MR 392 (Clio III) or MR 411 (New Twingo) 86A, Radio, Offset
audio socket: Removal – Refitting).
If the fault is still present, contact Techline.

86C-30
AFTER REPAIRCarry out another fault finding check on the system.
Clear the stored faults using command RZ001 Fault memory.
Deal with any other faults.
V1 MR-413-X44-86C000$090.mif
MULTIMEDIA CONNECTION
Fault finding – Interpretation of faults86C
CBOX
Vdiag No.: 04
DF007
PRESENT
OR
STOREDUSB FUNCTION
1. DEF: Faulty function
NOTESConditions for applying fault finding procedures to stored faults:
The fault is declared present after the multimedia system was switched on using the
radio on/off button.
On Clio III, if the vehicle is not equipped with a navigation system, the mobile
connectivity computer is directly connected to the radio.
Otherwise, the mobile connectivity computer is connected to the navigation system.
Consult the interpretation of ALP 2 My USB peripheral cannot be read (See Fault finding charts).
CBOX_V04_DF007