key Seat Ibiza 2020 Directive 2014/53/EU Bluetooth

Page 12 of 90 Report No. : 60404487 001


TR F No. IEC62368_1 C

OVERVIEW OF ENERGY SOURCES AND SAFEGUARDS
Clause Possible Hazard
5 Electrically - caused injury
Class and Energy Source
(e.g. ES3: Primary circuit) Body Part
(e.g. Ordinary) Safeguards
B S R
ES1: All parts Ordinary N/A N/A N/A
6 Electri cally - caused fire
Class and Energy Source
(e.g. PS2: 100 Watt circuit) Material part
(e.g. Printed board ) Safeguards
B 1 st
S 2 nd
S
PS3: > 100 Watt circuit PCB and combustible
materials within the metallic
enclosure and
mains parts See clause
6.3.1 C ontrol fire
spread,
Min V - 1,
PCB ,
connector
V - 1 See clause
6.4.1
Fire
enclosure is
provided
PS2: > PS1, ≤ 100 W att circuit PCB and combustible
materials i n monitor ,
Keyboard circuits See clause
6.3.1 See clause
6.4.5.2 N/A
7 Injury caused by hazardous substances
Class and Energy Source
(e.g. Ozone) Body Part
(e.g., Skilled) Safeguards
B S R
N/A N/A N/A N/A N/A
8 Mechanically - caused injury
Class and Energy Source
(e.g. MS3: Plastic fan blades) Body Part
(e.g. Ordinary) Safeguards
B S R
MS1: Sharp edges and corners Ordinary N/A N/A N/A
MS1: Equipment mass Ordinary N/A N/A N/A
9 Thermal burn
Class and Energy Source
(e.g. TS1: Keyboard caps) Body Part
(e.g., Ordinary) Safeguards
B S R
TS1:Monitor enclosure Ordinary N/A N/A N/A
TS1:Screen surface Ordinary N/A N/A N/A
TS1:Keyboard enclosure Ordinary N/A N/A N/A

Page 14 of 90 Report No. : 60404487 001


TR F No. IEC62368_1 C

ENERGY SOURCE DIAGRAM
Optional . Manufacturers are to provide the energy sources diagram identify declared energy sources and
identifying the demarcations are bet ween power sources. Recommend diagram be provided included in
power supply and multipart systems.
Insert diagram below. Example diagram designs are; Block diagrams; image(s) with layered data; mechanical
drawings
■ ES ■ PS ■ MS ■ TS ■ RS

ES Classification:
ES1: All parts .

PS Classification:
PS3: Head unit .
PS2: LCD module and Keyboard circuits .

MS classification:
MS1 : There are no sharp edges or corners . Equipment mass is under 7 kg .

TS classification:
TS1: All accessible parts including monitor enclosure, screen surface and keyboard enclosure .

RS classification:
RS1: Indicating lights and low power devices.

Page 50 of 90 Report No. : 60404487 001

IEC 62368 - 1
Clause Requirement + Test Result - Remark Verdict


TR F No. IEC62368_1 C
5.8 TABLE: Backfeed safeguard in battery backed up supplies
N/A
Location Supply
voltage (V) Operating and fault
condition Time (s) Open - circuit
voltage (V) Touch
current (A) ES Class

Supplementary information:
Abbreviation: SC= short circui t, OC= open circuit

6.2.2 TABLE: Power source circuit classifications
P
Location Operating and
fault condition Voltage (V) Current (A) Max.
Power 1)

(W) Time (S) PS class
Mains part - 1 2 V d.c. - - - PS3
(Declared)
Speaker
output W orst - case fault 7.38 1.85
( calculated ) 13.62 3 PS1
CN501
(49, GND) /
LCD PMR W orst - case fault 1.70 0.01 0.02 3 PS1
CN951
( 51, GND ) /
KEY_POW ER W orst - case fault 3.25 0.10 0.33 3 PS1
CN951
(17,GND) Worst - case fault 3.32 3.90 13.00 3 PS1
CN951
(1, GND) /
SYS 5.2 W orst - cas e fault 4.20 8.20 34.4 0 5
PS2
CN951
( 15 , GND ) /
VCC *) W orst - case fault 7.60 12.70 96.7 0 5
PS2
Supplementary information:
Abbreviation: SC= short circuit; OC= open circuit
1) Measured after 3 s for PS1 and measured after 5 s for PS2 and PS3.
PS3: All combu stible materials except for PS2 and PS1 parts below.
PS2: Monitor circuit and keyboard circuit.
*) LCD module and keyboard power line .

Page 53 of 90 Report No. : 60404487 001

IEC 62368 - 1
Clause Requirement + Test Result - Remark Verdict


TR F No. IEC62368_1 C
16. Power key knob body 25.5 29.5 - 60
17. Enclosure near media button 28.6 32.6 - 77
18. Frame body (Not accessible) 34.4 - 98.4 -
19. Metal enclosure body (Not accessible) 40.4 - 104.4 -
Ambient temperature See
above See
above See
above -
Temperature T of winding: t
1 (°C)
R
1 (  ) t
2 (°C)
R
2 (  ) T (  C) Allowed
T
max (  C) Insulation
class

Supplementary information:
Note 1. The temperatures for accessible parts are adjusted to reflect a value of 25 °C .
Note 2. Maximum operating Temperature pe rmitted by the Manufacturer(Tma) is 85  C .



B.2.5 TABLE: Input test
P
U (V) Hz I (A) I rated (A) P (W) P rated (W) Fuse No I fuse (A) Condition/status
10.2 -
2.31 -
23.56 - - -
Max. normal
load condition.
12.0 -
2.20 3.5
26.40 - - -
Max. normal
load condition.
14.4 -
2.16 -
31.10 - - -
Max. normal
lo ad condition.
Supplementary information:
Max. normal load condition : The equipment is operated in such a way as to deliver one - eighth of the NON -
CLIPPED OUTPUT POWER to the RATED LOAD IMPEDANCE ( 4Ω ) using the standard signal described
in Annex E and Max. brightness for LCD module.

Page 54 of 90 Report No. : 60404487 001

IEC 62368 - 1
Clause Requirement + Test Result - Remark Verdict


TR F No. IEC62368_1 C

B.3, B.4 TABLE: Abnormal operating and fault condition tests
P
Ambient temperature T
amb (  C) ................................ ..................... : 2 1 - 2 3

Power source for EUT: Manufacturer, model/type, outputrating .. : -

Component No. Condition Supply
voltage
(V) Test
tim e Fuse no. Fuse
current
(A) Observation
Ventilation
openings Block ed 14.4 2 h - - FI : 2.16 A, NO,
CT (Monitor body : 3 8.0  C,
Power key knob body : 2 6.1
 C, Enclosure near media
button : 29.4  C, Ambient :
2 1.2  C, NCD, NH
Speaker output Max. non -
clipp ed output 14.4 2 h - - FI : Max. 3.43 A, NO,
CT ( Amp IC body (IC163) :
80.4  C , Monitor body : 3 8.0
 C, Power key knob body :
26.3  C, Enclosure near
media button : 29.5  C,
Ambient : 2 1.5  C, NCD, NH
Speaker output SC 14.4 1 h - - FI : 0.5 - 1.5 5 A , IP , NCD,
NH
IC101(3,8) SC 14.4 1 h - - FI : 0.5 A , CD(IC101) , NH
IC902(1,6) SC 14.4 1 h - - FI : 0.5 A , CD(IC902) , NH
Supplementary information:
Abbreviation:
FI – Final Input Current; IP – Internal protection operated; NO – Normal Operated;
CD – Componen t Damaged (list damaged components); NCD – No Component Damaged;
NH – No Hazard ; CT – Constant temperatures were obtained (list components: temperature;);
NB – No indication of dielectric breakdown; YB – Dielectric breakdown (indicate time and location);
NC – Cheesecloth remained intact; YC – Cheesecloth charred or flamed;

Page 56 of 90 Report No. : 60404487 001

IEC 62368 - 1
Clause Requirement + Test Result - Remark Verdict


TR F No. IEC62368_1 C

Q.1 TABLE: Circuits intended for interconnection with building wiring (LPS)
N/A
Output
Circuit Condition U
oc (V) Time (s) I
sc (A) S (VA)
Meas. Limit Meas. Limit








Supplementary Information:
SC=Short circuit, OC=Open circuit


T.2, T.3,
T.4, T.5 TABLE: Steady force test
N/A
Part/Location Material Thickness
(mm) Probe Force
(N) Test
D uration
(s) Observation

Supplementary information:


T.6, T.9 TABLE: Impact test
P
Location/part Material Thickness
(mm) Height
(mm) Observation
Front, Top / Monitor PC /ABS Min. 1.5 1 300 No damaged, no hazard
Front / Keyboard PC/ABS Min. 1.5 1 300 No damaged, no hazard
Supplementary information:


T.7 TABLE: Drop test
N/A
Location/part Material Thickness
(mm) Height
(mm) Observation

Supplementary information:

Page 57 of 90 Report No. : 60404487 001

IEC 62368 - 1
Clause Requirement + Test Result - Remark Verdict


TR F No. IEC62368_1 C

T.8 TABLE: Stress relief test
P
Location /Part Material Thickness
(mm ) Oven Temperature
(  C) Duration
(h) Observation
Monitor , Keyboard PC /ABS Min. 1.5 102.6 7 No shrinkage or
distortion.
No defeat its
safeguard function.
Supplementary information:


X TABLE: Alternative method for determining minimum clearances distance s
N/A
Clearance distanced
between: Peak of working voltage
(V) Required cl
(mm) Measured cl
(mm)

Supplementary information:

Page 11 of 89 Report No. : 60404488 001


TR F No. IEC62368_1 C

OVERVIEW OF ENERGY SOURCES AND SAFEG UARDS
Clause Possible Hazard
5 Electrically - caused injury
Class and Energy Source
(e.g. ES3: Primary circuit) Body Part
(e.g. Ordinary) Safeguards
B S R
ES1: All parts Ordinary N/A N/A N/A
6 Electrically - caused fire
Class and Energy Source
(e.g. P S2: 100 Watt circuit) Material part
(e.g. Printed board ) Safeguards
B 1 st
S 2 nd
S
PS3: > 100 Watt circuit PCB and combustible
materials within the metallic
enclosure and
mains parts See clause
6.3.1 Control fire
spread,
Min V - 1,
PCB ,
connector
V - 1 See clause
6.4.1
Fire
enclosure is
provided
PS2: > PS1, ≤ 100 W att circuit PCB and combustible
materials i n monitor ,
Keyboard circuits See clause
6.3.1 See clause
6.4.5.2 N/A
7 Injury caused by hazardous substances
Class and Energy Source
(e.g. Ozone) Body Part
(e.g., Skilled) Safeguards
B S R
N/A N/A N/A N/A N/A
8 Mechanically - caused injury
Class and Energy Source
(e.g. MS3: Plastic fan blades) Body Part
(e.g. Ordinary) Safeguards
B S R
MS1: Sharp edges and corners Ordinary N/A N/A N/A
MS1: Equipment mass Ordinary N/A N/A N/A
9 Thermal burn
Class and Energy Source
(e.g. TS1: Keyboard caps) Body Part
(e.g., Ordinary) Safeguards
B S R
TS1:Monitor enclosure Ordinary N/A N/A N/A
TS1:Screen surface Ordinary N/A N/A N/A
TS1:Keyboard enclos ure Ordinary N/A N/A N/A

Page 13 of 89 Report No. : 60404488 001


TR F No. IEC62368_1 C

ENERGY SOURCE DIAGRAM
Optional . Manufacturers are to provide the energy sources diagram identify declared energy sources and
identifying the demarcations are between power sources. Recommend diagram be provided included in
power supply and multipart systems.
Insert diagram below. Example diagram designs are; Block diagrams; image(s) with layered data; mechanical
drawings
■ ES ■ PS ■ MS ■ TS ■ RS

ES Classification:
ES1: All parts .

PS Classification:
PS3: Head unit .
PS2: LCD module and Keyboard circuits .

MS classification:
MS1 : There are no sharp edges or corners . Equipment mass is under 7 kg .

TS classification:
TS1: All accessible parts including monitor enclosure, screen surface and keyboard enclosure .

RS classification:
RS1: Indicating lights and low power devices.

Page 49 of 89 Report No. : 60404488 001

IEC 62368 - 1
Clause Requirement + Test Result - Remark Verdict


TR F No. IEC62368_1 C
5.8 TABLE: Backfeed safeguard in battery b acked up supplies
N/A
Location Supply
voltage (V) Operating and fault
condition Time (s) Open - circuit
voltage (V) Touch
current (A) ES Class

Supplementary information:
Abbreviation: SC= short circuit, OC= open circuit

6.2.2 TABLE: Power source circuit classifications
P
Location Operating and
fault condition Voltage (V) Current (A) Max.
Power 1)

(W) Time (S) PS class
Mains part - 1 2 V d.c. - - - PS3
(Declared)
Speaker
output W orst - case fault 7.3 3 1.8 3
( calculated ) 13. 4 3 3 PS1
CN501
(49, GND) /
LCD PMR W orst - case fault 1.70 0.0 2 0.0 3 3 PS1
CN951
( 51, GND ) /
KEY_POW ER W orst - case fault 3.2 4 0.10 0.3 2 3 PS1
CN951
(17,GND) Worst - case fault 3.32 3.90 13.00 3 PS1
CN951
(1, GND) /
SYS 5.2 W orst - case fault 4.2 2 8. 10 34. 20 5
PS2
CN951
( 15 , GND ) /
VCC *) W orst - case fault 7.6 1 12. 6 0 95.90 5
PS2
Supplementary information:
Abbreviation: SC= short circuit; OC= open circuit
1) Measured after 3 s for PS1 and measured after 5 s for PS2 and PS3.
PS3: All combustible materials except for PS2 and PS1 parts be low.
PS2: Monitor circuit and keyboard circuit.
*) LCD module and keyboard power line .