light Seat Tarraco 2020 User Guide

Operation
The front and rear electric windows can be
oper at
ed by using the controls on the driver
door. The other doors each have a switch for
their own window.
Always close the windows fully if you park the
vehicle or leave it unattended ››› .
Y ou can use the el

ectric windows for approx.
10 minutes after switching off the ignition if
neither the driver door nor the front passen-
ger door have been opened.
Safety switch _*
The safety control ››› Fig. 88
5 on the driver
door can be used t o disabl

e the electric win-
dow buttons on the rear doors.
Safety switch not pressed: buttons on rear
doors are activated.
Safety switch pressed: buttons on rear doors
are deactivated.
The safety control symbol _ lights up in yel- low if the buttons on the rear doors are
switched off.
Convenience open/close function
The electric windows can be opened or
closed from outside using the vehicle key:
Convenience opening:

Lights
Several warning and control lamps light up
f or a f
ew seconds when the ignition is switch-
ed on, signalling that the function is being
verified. They will switch off after a few sec-
onds. WARNING
Observe the safety warnings ››

› in Con-
tr ol and w
arning lamps on page 85. Headlight switch
Fig. 92
Dash panel: lights control.

Operation
Audible warnings to advise the driver that
the lights hav e not been s
witched off
If the ignition is not connected and the driver
door is open, an audible warning signal is
heard in the following cases: this will remind
you to turn the light off.

Lights
Turn signal and main beam lever Fig. 94
Turn signal and main beam lever. More the lever to the required position:
Right t urn light or right
-hand parking light
(ignition switched off).
Left turn light or left-hand parking light
(ignition switched off).
Turning main beam headlights on: control
lamp  lit up on the instrument panel.
The headlight flasher comes on while we
pull the lever. Control lamp  lit up.
Place the lever in rest position to turn off the
corresponding function.
Convenience turn signals
When the ignition is switched on, move the
lever as far as possible upwards or down-
wards and release the lever. The turn signal
will flash three times. 1 2
3
4 The convenience turn signals are switched on
and off in the inf
ot

ainment system by means
of the function button  ! SETTINGS ! Light ! Light Assist ! Convenience
turn signals
››› page 90
.
In vehicles that do not have the correspond-
ing menu, this function can be deactivated in
a specialised workshop.
Parking light 
The parking lights will only work with the igni-
tion off. If said light is on, an audible warning
will sound while the driver door is open.

Lights
to the vehicle lighting system, for example,
if additional headlights ar
e inst
alled.CAUTION
To avoid affecting the operation of the sys-
t em, t

ake the following points into consid-
eration:

Lights
WARNING

Operation
Interior and reading lights Fig. 96
Detail of roof lining: front lighting of the
passenger compartment. Knob Function

Operation
Bag hooks Fig. 128
In the luggage compartment: bag
hooks. There may be hooks for hanging bags on
both sides of the luggage compartment
› ›
› Fig. 128.
The retaining hooks have been designed to
secure light shopping bags. WARNING
Never use the hooks to hang luggage or
other ob jects. In case of sudden br

aking or
an accident, the hooks could break. CAUTION
Each hook is designed for a maximum load
of 2.5 k g. Trapdoor for long loads
Fig. 129
Backrest of the rear seat: opening the
tr apdoor f

or long loads Depending on the features, on the rear seat,
behind the centr
al armr

est, there is a tail-
board for transporting long items in the interi-
or, such as skis.
Opening the tailboard for long items

Operation
LED on the power socket
Flashing red
light: There is an anomaly, e.g. dis-
connection due t
o a curr
ent
surge or overheating. Disconnection due to overheating
When the t
emper

ature exceeds a certain val-
ue, the 230 volt socket inverter is automati-
cally disconnected. The disconnection pre-
vents overheating when the power consump-
tion of the connected devices is excessive or
the ambient temperature is very high. The
230-volt power supply can be used once
again after a cooling time. First unplug the
connector of the connected device and then
plug it back in again. This prevents the elec-
trical device from being switched on again if
this is not wanted. WARNING
The electrical system is under high voltage!

Air conditioning
and colourless toxic gas. Carbon monoxide
can cause peopl
e t
o lose consciousness. It
can also cause death. Radio-operated remote control
Fig. 152
Auxiliary heating: radio-operated re-
mot e contr

ol. Switch on: Pr
ess the butt

on for about
one second
Switch off: Press the button for about
one second
If the buttons of the remote control are press-
ed unnecessarily, it could switch on the auxili-
ary heater involuntarily, even when it is out of
range or when the control lamp is flashing. 
 Remote control LED
When the buttons ar

e pressed, the LED of re-
mote control ››› Fig. 152
2 gives the user a
r ange of inf

ormation:
It lights up for approx. 2 seconds