SSANGYONG KORANDO 2013 Service Manual

Engine oil
Coolant
Coolant and oil flows
Cylinder head
Cylinder block water
jacket
Coolant pumpCoolant pipe
Thermostat
Supply line to cylinder head
Oil pumpSupply line to PCJ
Main bearing
Oil filter assembly

1740-01
1. SPECIFICATION
Unit Description Specification
Air cleaner elementFilter type Dry, filter element
Filtering area
Service intervalClean every 7,500 km
Change every 15,000 km
Air cleaner assemblyWeight 1.45 kg
Operating temperature
Capacity 7L
Shorten the service interval under severe conditions such as driving on a dusty road or offroad. *

2. LAYOUT
Intake Manifold Assy
Bolt
T-MAP sensor
Bolt
Intake Manifold Brkt 1.
2.
3.
4.
5.Bolt
Electric Throttle Body
Bolt
Acoustic Cover 6.
7.
8.
9.

0000-00
Air Cleaner Assy
Element Assy
Air Cleaner MTG NO.2
Insulator Collar
Spring Clamp
Resonance Duct
Resonance O-Ring
Air Cleaner MTG NO.1
Air Cleaner MTG Bolt 1.
3.
5.
6.
7.
8.
9.
10.
11.Snorkel Assy
Water Portector
Resonator Assy
RR Fascia MTG Screw Rivet
Bolt
Nut
Screw
Air Cleaner to Engine Hose Assy 12.
13.
14.
17.
18.
19.
20.
21.

Intake manifold assembly
T-MAP sensorVIS valve
1. OVERVIEW
To improve the engine performance, the VIS system has been introduced in the intake manifold. It
And, to reduce the internal pulsation in the intake manifold, the Runner # 1 and #2 are located in
2. COMPONENTS
VIS solenoid valve

0000-00
Purge control solenoid
valve
Blow-by hosePCV valve
Electronic throttle bodyAir cleaner element

When Long Runner is operating When Short Runner is operating
3. OPERATING PROCESS
Intake air flows

1740-01
4. INPUT/OUTPUT DEVICES

5. CIRCUIT DIAGRAM

2221-01
1. SPECIFICATION
Unit Specification
Fuel systemFuel Unleaded gasoline
Fuel injection MPI (Muilt Point Injecter) type
Fuel supply Returnless Fuel System
Fuel tankCapacity 57 L
Material Plastic
Fuel sender Dual sender type
Fuel filter Service interval Change every 100,000 km
Fuel pump Pressure 3.8 bar
InjectorColor Black
Capacity 187.2 g/min