SSANGYONG KORANDO 2013 Service Manual

8710-01
Windshield washer switch coupled windshield wiper operation (during intermittent
windshield wiper)
The ignition is turned ON with the wiper AUTO switch ON.
The windshield wiper LO relay is activated 0.5 seconds (T1) after the windshield washer switch is
turned ON for less than 0.6 seconds (T2). A.
B. Operation 1. (windshield washer switch pressed for 0.1 to 0.59 seconds)
When the windshield washer switch is turned OFF, the windshield wiper LO relay is deactivated
after the windshield wiper motor rotates once (T5), and then the windshield wiper is operated
intermittently after the rest time (T6). -
The ignition is turned ON with the wiper AUTO switch ON.
The windshield wiper LO relay is activated 0.5 seconds (T1) after the windshield washer switch is
turned ON for 0.6 seconds or more (T3). C.
D. Operation 2. (windshield washer switch pressed for 0.6 seconds or more)
When the windshield washer switch is turned OFF, the windshield wiper LO relay is deactivated
after the windshield wiper motor rotates 3 times (T4), and then the windshield wiper is operated
intermittently after the rest time (T6). -

Operating process
- IGN ON and wiper AUTO switch in ON position
Priority of operation:

8710-01
Rear washer motor control
The ignition is turned ON.
The rear washer motor is activated when the rear washer switch is turned ON.
The rear washer motor is deactivated when the rear washer switch is turned OFF. A.
B.
C. Operation 1.
Operating process
- IGN ON
Priority of operation: Windshield washer switch > Rear washer switch.

AUTO washer switch coupled wiper operation
The wiper AUTO switch is in the OFF position with IGN ON
When the AUTO washer switch is turned ON for 0.1 seconds or more (T1), the windshield washer
motor is activated for 2 seconds (T2).
The windshield wiper LO relay is operated 4 times (T5) 0.5 seconds (T4) after the windshield washer
motor has been activated.
And then the windshield wiper LO relay is deactivated 3 times (T6) of operation while the windshield
washer motor is activated for 1.5 seconds (T3). A.
B.
C.
D. Operation 1.
The input from the AUTO washer switch during the washer coupled wiper operation is overridden.
The input from the AUTO washer switch during the AUTO washer coupled wiper operation is
ignored.
The input from the AUTO washer switch during the speed sensitive intermittent wiper operation is
ignored.
When the signal from the intermittent wiper switch is received during the AUTO washer operation,
the AUTO washer doesn't operate any longer and the intermittent wiper operation will be performed.
The input from the washer switch during the AUTO washer operation is ignored. -
-
-
-
-

8710-01

Operating process
- IGN ON and wiper AUTO switch in OFF position

8710-01
Operating process
BCM and rain sensor system diagram
Data recognition time
The LIN communication is established when the ignition is turned ON, regardless of the wiper and light
switch operation. Then the function for the LIN data is carried out with the wiper AUTO switch or AUTO
light switch in the AUTO position.
The data from the rain sensor is recognized as 2 consecutive data.
Operation when data is recognized
Data OFF: Lo/HI relay output OFF
Low speed signal: LO relay output ON (ON for at least 1 revolution), HI relay output OFF
High speed signal: HI relay output ON (ON for at least 1 revolution), LO relay output ON
The washer input is overridden during continuous operation of wiper. (washer coupled wiper operation
during intermittent operation)

Power-up reminder wiper
The wiper AUTO switch is in the ON position.
The ignition is turned ON, and then OFF, and then ON again.
The windshield wiper LO relay is not operated. A.
B.
C. Operation 1.
The position of the wiper AUTO switch is changed to the ON from the OFF position with IGN ON.
The wiper motor rotates once (T1) initially when the windshield wiper LO relay is activated, regardless of
the rain sensor communication. D.
E. Operation 2.
The ignition is turned ON with the wiper AUTO switch in the ON position.
The windshield wiper LO relay is not operated. F.
G. Operation 3.
(The rain sensor did not detect rain drops after Operation 2.)
Operation 4.
(The rain sensor detects rain drops after Operation 2.)
The ignition is turned ON with the wiper AUTO switch in the ON position.
The windshield wiper LO relay is operated. H.
I.

8710-01

Operating process
- IGN ON