SSANGYONG RODIUS 2005 Service Manual

0-14
RODIUS 2005.07
7410-01
SEAT
▶ Rear 1st seat swiveled and rear 2nd seat back folding (while parking)
▶ 8 passengers with loading
Front seat : Move to the far front
Rear 1st seat : Middle
Center seat jumping
Swiveled
Rear 2nd seat: Middle / Back folding
Rear 3rd seat : Fixed
·
·
·
·
? Front seat : Move 36 mm from the
far end to the front
? Rear 1st seat : Middle
? Rear 2nd seat: Middle
? Rear 3rd seat : Double folding
·
·
·
·

0-15
SEAT
RODIUS 2005.07
7410-01
▶ 5 passengers with loading
▶ 2 passengers with loading
Front seat : Move 36 mm from the far
end to the front
Rear 1st seat : Move to the far end
Rear 2nd seat: Middle
Rear 3rd seat : Double folding
·
·
·
·
Front seat : Move to the far end /
Back folding
Rear 1st seat : Middle / Back folding
Rear 2nd seat: Middle / Back folding
Rear 3rd seat : Middle / Back folding
·
·
·
·

0-16
RODIUS 2005.07
7410-01
SEAT
5) Entry Way
Rear 1st seat : Folding center seat
Rear 2nd seat : Folding center seat
Rear 3rd seat : Fixed

0-17
SEAT
RODIUS 2005.07
7410-01
6) Sliding of Rear 1st and 2nd Seat
- 4 rail (1.610mm) for rear 1st and 2nd seat sliding
- Rail mounting : Floor bolt type

0-18
RODIUS 2005.07
7410-01
SEAT
4. OPERATION OF FRONT SEAT(DRIVER'S SEAT)
1) Components
Sliding motor
Sliding rail
Seat position
(front up/down
rail) Seat warmer
connector
Seat position
(up/down
motor)
Seat position
(up/down rail)
Seat position
(rear up/down
motor)
Reclining motor

0-19
SEAT
RODIUS 2005.07
7410-01
2) Operation of seat
Sliding
·
Seat moves from front to rea
r
controllde by sliding control switch
:
Seat position (front up/down)
·
Front side of seat moves up/down
controlled by seat position control
switch
:
Seat position (rear up/down)
·
Rear side of seat moves up/down
controlled by seat position control
switch
:

0-20
RODIUS 2005.07
7410-01
SEAT
Seat height (up/down)
·
Seat moves up/down controlled by
seat height control switch
:
Reclining
·
Seat back reclining controlled by seat
reclining control switch
:
Seat reclining motor

0-21
SEAT
RODIUS 2005.07
7410-01
3) Seat electrical equipment check
Disconnect the seat wiring connector and check if the power is supplied (Refer to the wiring
diagram)
·
1) If the power supply has no problem, remove the seat.
2) Check the motor and wiring if damaged.
3) Connect the battery to the seat connector.
4) Control the seat switch and check the opration.
- Electrical parts are not supplied by a part separately.

0-22
RODIUS 2005.07
7410-01
SEAT
4) Operation of center seat
- Pull up the center seat when to jump
- Push down the center seat when to seat
5) Removal and installation of center seat (jumping seat)
- Unscrew 4 mounting nuts to remove the center seat
When seating
When jumping

0-23
SEAT
RODIUS 2005.07
7410-01
5. OPERATION OF REAR SEAT
1) Rear 1st seat (swivel seat)
Seat back folding cable
Sliding cable
Seat back flat cable
Jumping
mechanism
Swivel lever Sliding lever