SSANGYONG RODIUS 2012 Service Manual
Page 481 of 715
03-8
2) Circuit Diagram
Page 482 of 715
04-38010-01
1. SPECIFICATIONS
1) Power, Voltage, Current
Description Specification
Rated voltage DC 12V
Operating voltage DC 9V ~ 16V
Inspection voltage DC 13.5V
Operating temperature-30ËšC ~ +75ËšC (while driving)
Storage temperature-40ËšC ~ +85ËšC
Performance guarantee voltage DC 10V ~ 15V
Dark currentbelow 3mA (12V, 25°C), Stabilized conditions (standby
mode) around 180 seconds after IGN OFF
2) LCD Display
Description Specification
Color of display Black
Color of back-light Yellow/Green
Running type 1/4 Duty, 1/3 Bias
Page 483 of 715
04-4
Warning lamp/Indicator Cluster
2. LAYOUT
Meter Cluster
1. OVERVIEW
The instrument cluster for this vehicle consists of the Meter cluster and the Warning
lamp/Indicator cluster. For 2012 Model, some warning lamps and indicators have been deleted,
added, and changed according to the changes of engineering design.
Deleted: Warning lamps and indicators for EAS, EPB, and TPMS
Changed: EBD warning lamps
Added: Indicators for Part-time transfer case -
-
-
Page 484 of 715
05-38310-01
1) Exterior Lamps
1. LAYOUT
Page 485 of 715
05-4
(1) Front Lamps
HeadlampHeadlamp
Right fog lamp
(12V-5W)
Left fog lamp
(12V-5W)
Low beam (12V-55W)Tail lamp (12V-5W)
High beam (12V-55W)Turn signal lamp
(12V-28W)
Connector
Tail lamp
Tail lamp/Turn
signal lamp
connector
Turn signal lamp Headlamp
(Low beam) Headlamp
(High beam)
Side repeater (12V-5W)
Page 486 of 715
05-58310-01
(2) Rear Lamps
High mounted stop lamp
(12V-6W)
License plate lamp
(12V-5W, 2)
Tail lamp assembly
Rear lamp
Stop lamp (12V-8W)
Rear turn signal lamp (12V-27W)
Tail lamp (12V-8W)
Stop lamp
Rear turn signal lamp or
rear fog lamp (LH only)
Tail lamp
Tail lamp assembly
connector
Page 487 of 715
05-6
2) Interior Lamps
Page 488 of 715
06-38510-00
1. SPECIFICATIONS
1) Multifunction Switch
2) Auto Light Sensor
Description Description
Multifunction
switchRated voltage DC 12V
Operating temperature-30℃~+80℃
Rated load Light switch ON: 1A (Relay load)
Dimmer and passing switch High beam/low beam/passing:
0.3A (Relay load)
Turn signal switch6.6±0.5A (Lamp load)
Wiper switch Low: 5A, High: 7A (Motor load)
Auto: 0.22±0.05A (Relay load)
Fixed: max. 28A (Motor load)
Washer switch 4A (Motor load)
Intermittent wiper switch max. 25 mA
Mist switch 5A (Motor load)
Description Description
Auto light sensor unit Operating voltage 9~16V
Load max. 200 mA (Relay load)
Operating temperature-30℃~+85℃
Storage temperature-40℃~+120℃
Location On the left top of instrument panel
Page 489 of 715
06-4
4WD Switch, Headlamp
Leveling Switch, Rear Wipe
Switch
Outside Rearview
Mirror
Adjusting/Folding
Switches
Remote Control Switches on Steering Wheel
Window switch
1. LAYOUT
Volume button
Seek buttonManual gear shift
down switch
Power buttonManual gear shift
up switch
Mode button
Mute button
Bluetooth switch
Page 490 of 715
06-58510-00
Passenger’s Window Switch
(same with rear window
switches)
Multifunction Switch and Steering Wheel Angle
Sensor
Room Lamp and Sunroof Switch (w/
multimeter)
Defogger switchPassenger’s seat
warmer switch Rear fog lamp
switch Driver’s seat warmer
switchFront fog
lamp switch
Hazard warning
flasher switchESP OFF
switch
Door coupled
room lamp switch
Sunroof switch
Multimeter
Front room lamp switch