SUBARU OUTBACK 2005 4.G Owners Manual

5-26
Audio
"
Inserting a disc in a desired position
1. Briefly press the “LOAD” button. If the magazine in
the player has an idle position where you can insert a
disc, the disc number indicator associated with the idle
position will blink.
The positions in the magazine the indicator of which
steadily lights up are already loaded with discs. 2. Press the “Disc select” button at the position where
you want to insert a disc.
3. When the “LOAD” indicator flashes, insert the disc.Once you have inserted the disc, the “LOAD” indicator
will go off. The disc will then be automatically drawn in,
and the player will begin to play the first track on thedisc. "
If you wish to insert another disc, repeat the proce-
dure beginning with step 1.
If you do not insert any disc in 15 seconds after you
have pressed the “LOAD” button, the player will begin
to play back the first track of the last disc you have in-
serted.
LOAD
UB5216BA
123 456
UB5210AA

5-27
Audio
– CONTINUED –
"While the player is in the loading mode, if you press
the “FM” or “AM” button, the player will enter standby
mode. Press the “CD” button to start playback. " Loading all the magazine (Full disc loading
mode)
0
1. If you continue to press the “LOAD” button for more
than 1.5 seconds, the player will produce beep sound
and will enter the full disc loading mode.
2. When the disc number indicator and “ALL LOAD”
indicator start flashing, insert a disc within 15 seconds.
If a disc is successfully loaded during this period, the
disc number indicator will stop blinking and will steadi-
ly light. 3. When the loading of a disc is complete, the next
disc number indicator will blink. Then repeat Step 2.
4. When the magazine is filled with discs by repeating
Steps 2 and 3, the player will start playback of the
discs, beginning with the one inserted first.
If you fail to insert any disc during each 15-second in-
terval, the full disc loading mode will be canceled, and
the player will start playback of the disc inserted first. !
How to play back a CD or make a pause
" When there is no CD inserted:
Insert a CD by referring to “How to insert a CD(s)”.
When a CD is loaded, the player will start playback of
the CD, beginning with the first track.
LOAD
UB5216BA

5-28
Audio
"
When there are CDs loaded:
Press a desired one of the “Disc select” buttons the
disc number indicator of which steadily lights up. The
player will then start playback of the selected CD, be-
ginning with the first track.
If you have inserted a disc that the player cannot read,
the player will show the elapsed time but will not pro-
duce any sound. !
To select a song from its beginning
" Forward direction
Briefly press the “ ” side of the TUNE/TRACK but-
ton to skip to the beginning of the next track. Each time
this side of the button is pressed, the indicated track
number will increase.
123 456
UB5210AA
TUNE
TRACK
UB5211BA

5-29
Audio
– CONTINUED –
"Backward direction
Briefly press the “ ” side of the TUNE/TRACK but-
ton to skip to the beginning of the current track. Each
time the button is pressed, the indicated track number
will decrease. !
Fast-forwarding and fast-reversing
" Fast-forwarding
Press the “ ” side of the TUNE/TRACK button con-
tinuously for more than 0.5 second to fast-forward thedisc.
Release the button to stop fast-forwarding.
NOTE
If you fast-forward past the last track on the disc,
the player will select the first track on the disc and
start playing it.
TUNE
TRACK
UB5211CA
TUNE
TRACK
UB5211BA

5-30
Audio
"
Fast-reversing
Press the “ ” side of the TUNE/TRACK button con-
tinuously for more than 0.5 second to fast-reverse the
disc.
Release the button to stop fast-reversing.
NOTE
If you fast-reverse to the beginning of the first
track on the disc, the fast-reversing will stop and
the player will start playing the first track on the
disc. !
Repeat playback
" To repeat the currently playing track
To repeat a track, press the “RPT” button while the
track is playing. The display will show “RPT”, and the
track will be repeated.
To cancel the track-repeat-play mode, press the
“RPT” button twice. The “RPT” indication will go off,
and the normal playback mode will be resumed.
NOTE " Each time you press the button, the mode will
change to the next one in the sequence shown be-
low.
TUNE
TRACK
UB5211CA
RPT
UB5213BA

5-31
Audio
– CONTINUED –
If you accidentally press the button and cancel the
track-repeat-play mode, press it again to reselect
the repeat play mode. "If you perform a fast-forward or fast-reverse op-
eration while the player is in repeat-play mode, the
repeat-play mode will remain active even after you
skip tracks. " If you perform a forward-direction or backward-
direction skip operation while the player is in re-
peat-play mode, the player will jump to the follow-
ing/previous track but the repeat-play mode will
remain active. " The repeat-play mode will be cancelled if you
perform any of the following steps: "Press the “ ” or “ ” side of the SEEK/
SCAN button " Press the “RPT” button.
" Press the “RDM” button
" Press the “ ” button
" Press the disc select button
" Select the radio mode
" Turn off the power of the audio equipment.
" Turn the ignition switch to the “OFF” position. "
To repeat the currently playing disc
To repeat the currently playing CD, press the “RPT”
button twice while a track is playing. The display will
show “D-RPT”, and the CD will be played repeatedly.
To cancel the disc repeat-play mode, press the “RPT”
button once more. The “D-RPT” indication will go off,
and the normal playback mode will be resumed.
NOTE " Each time you briefly press the button, the mode
will change to the next one in the sequence shown
below.
RPT D-RPT CANCEL
RPT
UB5213BA

5-32
Audio
If you accidentally press the button and cancel the
disc-repeat-play mode, press it again to reselect
the disc-repeat-play mode. "
The disc-repeat-play mode will be cancelled if
you perform any of the following steps:
"Press the “ ” or “ ” side of the SEEK/
SCAN button " Press the “RPT” button.
" Press the “RDM” button
" Press the “ ” button
" Press the disc select button
" Select the radio mode
" Turn off the power of the audio equipment.
" Turn the ignition switch to the “OFF” position. !
Random playback
Press the “RDM” button while a disc is being played
back to play all of the tracks on the disc in a random
order. The “RDM” indicator will come on and all songs
on the disc will be played in a random order.
To cancel the random mode, press the button again.
Then the “RDM” indicator goes out, and normal play-
back mode is restored.
NOTE " Random playback will be cancelled if you per-
form any of the following steps: "Press the “RPT” button
" Press the “ ” or “ ” side of the SEEK/
RPT D-RPT CANCEL
RDM
UB5214BA

5-33
Audio
– CONTINUED –
SCAN button "Press the “ ” button
" Press the disc select button
" Select the radio mode
" Turn off the power of the audio equipment.
" Turn the ignition switch to the “OFF” position.
" If you fast-forward the disc during random play-
back, the player will cancel the fast-forwarding
when the end of the last track on the disc is
reached and will then return to the random play-
back mode. If you fast-reverse the disc during ran-
dom playback, the fast-reversing will be canceled
as soon as the beginning of the track being played
is reached. The player will then return to the ran-
dom playback mode. " If you perform a forward direction skip while a
track is being played in the random playback
mode, the player will random select another track
and play it. If you perform a backward direction
skip, the disc will return to the beginning of the
currently playing track. !
Scan
The scan mode lets you listen to the first 10 seconds of each track on the disc in succession. Press the
“ ” side of the SEEK/SCAN button to start scanningthrough all tracks upward beginning with the track fol-
lowing the currently selected one. Press the “ ” side
of the button to start scanning through all tracks down-
ward beginning with the track preceding the currently
selected one. After all tracks on the disc have been
scanned, normal playback mode is restored.
To cancel a scan, press the “ ” or “ ” side of the
button again.
SEEK
SCAN
UB5212DA

5-34
Audio
NOTE
The scan mode will be cancelled if you perform
any of the following steps:"
Press the “RPT” button
" Press the “RDM” button
" Select the radio mode
" Press the disc select button
" Press the “ ” button
" Turn off the power of the audio equipment.
" Turn the ignition switch to the “OFF” position.
! How to unload CDs from the player
" Ejecting a CD from the player
Of the discs loaded, you can select and remove only
one disc.0
1. Use the disc select button to select the disc to be
ejected.
123 456
UB5210AA

5-35
Audio
– CONTINUED –
2. Briefly press the “ ” button. The selected disc
will be ejected. The disc number indicator will flash at
this time. When you remove the ejected disc, the disc
number indicator will go off.
To remove more discs in succession, repeat Steps 1
and 2. "
Ejecting all discs from the player (All disc ejec-tion mode)
0
1. If you continue to press the “ ” button, the play-
er will produce beep sound and will enter the all disc
ejection mode. At this time, the disc number indicator
and “ALL EJECT” indicator will flash.
2. Remove the disc that has been ejected. The other
discs loaded will then be ejected one after another. If
you do not remove the disc that has been ejected, the
“All disc ejection mode” will be canceled.
NOTE "Avoid driving the vehicle with a CD sticking out,
because vibration might make it fall out.
UB5215BA
UB5215BA